linux-toradex.git/arch/powerpc/include/asm, branch v3.2.54

compiler/gcc4: Add quirk for 'asm goto' miscompilation bug

2013-11-28T14:02:03+00:00

commit 3f0116c3238a96bc18ad4b4acefe4e7be32fa861 upstream.

Fengguang Wu, Oleg Nesterov and Peter Zijlstra tracked down
a kernel crash to a GCC bug: GCC miscompiles certain 'asm goto'
constructs, as outlined here:

  http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670

Implement a workaround suggested by Jakub Jelinek.

Reported-and-tested-by: Fengguang Wu 
Reported-by: Oleg Nesterov 
Reported-by: Peter Zijlstra 
Suggested-by: Jakub Jelinek 
Reviewed-by: Richard Henderson 
Cc: Linus Torvalds 
Cc: Andrew Morton 
Signed-off-by: Ingo Molnar 
[bwh: Backported to 3.2:
 - Drop inapplicable changes
 - Adjust context]
Signed-off-by: Ben Hutchings

powerpc: Work around gcc miscompilation of __pa() on 64-bit

2013-09-10T00:57:34+00:00

commit bdbc29c19b2633b1d9c52638fb732bcde7a2031a upstream.

On 64-bit, __pa(&static_var) gets miscompiled by recent versions of
gcc as something like:

        addis 3,2,.LANCHOR1+4611686018427387904@toc@ha
        addi 3,3,.LANCHOR1+4611686018427387904@toc@l

This ends up effectively ignoring the offset, since its bottom 32 bits
are zero, and means that the result of __pa() still has 0xC in the top
nibble.  This happens with gcc 4.8.1, at least.

To work around this, for 64-bit we make __pa() use an AND operator,
and for symmetry, we make __va() use an OR operator.  Using an AND
operator rather than a subtraction ends up with slightly shorter code
since it can be done with a single clrldi instruction, whereas it
takes three instructions to form the constant (-PAGE_OFFSET) and add
it on.  (Note that MEMORY_START is always 0 on 64-bit.)

Signed-off-by: Paul Mackerras 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

powerpc/modules: Module CRC relocation fix causes perf issues

2013-08-02T20:15:07+00:00

commit 0e0ed6406e61434d3f38fb58aa8464ec4722b77e upstream.

Module CRCs are implemented as absolute symbols that get resolved by
a linker script. We build an intermediate .o that contains an
unresolved symbol for each CRC. genksysms parses this .o, calculates
the CRCs and writes a linker script that "resolves" the symbols to
the calculated CRC.

Unfortunately the ppc64 relocatable kernel sees these CRCs as symbols
that need relocating and relocates them at boot. Commit d4703aef
(module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y)
added a hook to reverse the bogus relocations. Part of this patch
created a symbol at 0x0:

# head -2 /proc/kallsyms
0000000000000000 T reloc_start
c000000000000000 T .__start

This reloc_start symbol is causing lots of confusion to perf. It
thinks reloc_start is a massive function that stretches from 0x0 to
0xc000000000000000 and we get various cryptic errors out of perf,
including:

problem incrementing symbol count, skipping event

This patch removes the  reloc_start linker script label and instead
defines it as PHYSICAL_START. We also need to wrap it with
CONFIG_PPC64 because the ppc32 kernel can set a non zero
PHYSICAL_START at compile time and we wouldn't want to subtract
it from the CRCs in that case.

Signed-off-by: Anton Blanchard 
Acked-by: Rusty Russell 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

powerpc: Bring all threads online prior to migration/hibernation

2013-05-30T13:34:59+00:00

commit 120496ac2d2d60aee68d3123a68169502a85f4b5 upstream.

This patch brings online all threads which are present but not online
prior to migration/hibernation.  After migration/hibernation those
threads are taken back offline.

During migration/hibernation all online CPUs must call H_JOIN, this is
required by the hypervisor.  Without this patch, threads that are offline
(H_CEDE'd) will not be woken to make the H_JOIN call and the OS will be
deadlocked (all threads either JOIN'd or CEDE'd).

Signed-off-by: Robert Jennings 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

signal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorer

2013-03-27T02:41:25+00:00

flush_signal_handlers() needs to know whether sigaction::sa_restorer
is defined, not whether SA_RESTORER is defined.  Define the
__ARCH_HAS_SA_RESTORER macro to indicate this.

Vaguely based on upstream commit 574c4866e33d 'consolidate kernel-side
struct sigaction declarations'.

Signed-off-by: Ben Hutchings 
Cc: Al Viro

Revert "powerpc/eeh: Fix crash when adding a device in a slot with DDW"

2013-03-20T15:03:15+00:00

This reverts commit 066f289835f09a3f744d6bac96f25e25d20b3ded which was
6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.

This was not needed and is not suitable for 3.2.y.

Reported-by: Michael Neuling 
Signed-off-by: Ben Hutchings

powerpc/eeh: Fix crash when adding a device in a slot with DDW

2013-03-06T03:22:36+00:00

commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.

The DDW code uses a eeh_dev struct from the pci_dev. However, this is
not set until eeh_add_device_late is called.

Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
devices are added to the bus, making drivers' probe hooks to be called.
These will call set_dma_mask, which will call the DDW code, which will
require the eeh_dev struct from pci_dev. This would result in a crash,
due to a NULL dereference.

Calling eeh_add_device_late after pci_bus_add_devices would make the
system BUG, because device files shouldn't be added to devices there
were not added to the system. So, a new function is needed to add such
files only after pci_bus_add_devices have been called.

Signed-off-by: Thadeu Lima de Souza Cascardo 
Acked-by: Gavin Shan 
Signed-off-by: Benjamin Herrenschmidt 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

powerpc: Add "memory" attribute for mfmsr()

2012-08-02T13:37:46+00:00

commit b416c9a10baae6a177b4f9ee858b8d309542fbef upstream.

Add "memory" attribute in inline assembly language as a compiler
barrier to make sure 4.6.x GCC don't reorder mfmsr().

Signed-off-by: Tiejun Chen 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

powerpc: Fix wrong divisor in usecs_to_cputime

2012-07-25T03:11:38+00:00

commit 9f5072d4f63f28d30d343573830ac6c85fc0deff upstream.

Commit d57af9b (taskstats: use real microsecond granularity for CPU times)
renamed msecs_to_cputime to usecs_to_cputime, but failed to update all
numbers on the way.  This causes nonsensical cpu idle/iowait values to be
displayed in /proc/stat (the only user of usecs_to_cputime so far).

This also renames __cputime_msec_factor to __cputime_usec_factor, adapting
its value and using it directly in cputime_to_usecs instead of doing two
multiplications.

Signed-off-by: Andreas Schwab 
Acked-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

powerpc/time: Handle wrapping of decrementer

2012-01-12T19:29:22+00:00

commit 37fb9a0231ee43d42d069863bdfd567fca2b61af upstream.

When re-enabling interrupts we have code to handle edge sensitive
decrementers by resetting the decrementer to 1 whenever it is negative.
If interrupts were disabled long enough that the decrementer wrapped to
positive we do nothing. This means interrupts can be delayed for a long
time until it finally goes negative again.

While we hope interrupts are never be disabled long enough for the
decrementer to go positive, we have a very good test team that can
drive any kernel into the ground. The softlockup data we get back
from these fails could be seconds in the future, completely missing
the cause of the lockup.

We already keep track of the timebase of the next event so use that
to work out if we should trigger a decrementer exception.

Signed-off-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Greg Kroah-Hartman