linux-toradex.git/arch/powerpc/include, branch v5.9

Merge tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-09-18T18:48:25+00:00

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.9:

   - Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing
     crashes.

   - Fix a long standing bug in our DMA mask handling that was hidden
     until recently, and which caused problems with some drivers.

   - Fix a boot failure on systems with large amounts of RAM, and no
     hugepage support and using Radix MMU, only seen in the lab.

   - A few other minor fixes.

  Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy,
  Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav
  Jain, and Vaidyanathan Srinivasan"

* tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute
  cpuidle: pseries: Fix CEDE latency conversion from tb to us
  powerpc/dma: Fix dma_map_ops::get_required_mask
  Revert "powerpc/build: vdso linker warning for orphan sections"
  powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc
  selftests/powerpc: Skip PROT_SAO test in guests/LPARS
  powerpc/book3s64/radix: Fix boot failure with large amount of guest memory

Merge tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-08-30T18:43:50+00:00

Pull locking fixes from Thomas Gleixner:
 "A set of fixes for lockdep, tracing and RCU:

   - Prevent recursion by using raw_cpu_* operations

   - Fixup the interrupt state in the cpu idle code to be consistent

   - Push rcu_idle_enter/exit() invocations deeper into the idle path so
     that the lock operations are inside the RCU watching sections

   - Move trace_cpu_idle() into generic code so it's called before RCU
     goes idle.

   - Handle raw_local_irq* vs. local_irq* operations correctly

   - Move the tracepoints out from under the lockdep recursion handling
     which turned out to be fragile and inconsistent"

* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep,trace: Expose tracepoints
  lockdep: Only trace IRQ edges
  mips: Implement arch_irqs_disabled()
  arm64: Implement arch_irqs_disabled()
  nds32: Implement arch_irqs_disabled()
  locking/lockdep: Cleanup
  x86/entry: Remove unused THUNKs
  cpuidle: Move trace_cpu_idle() into generic code
  cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
  sched,idle,rcu: Push rcu_idle deeper into the idle path
  cpuidle: Fixup IRQ state
  lockdep: Use raw_cpu_*() for per-cpu variables

Merge tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-08-30T17:56:12+00:00

Pull powerpc fixes from Michael Ellerman:

 - Revert our removal of PROT_SAO, at least one user expressed an
   interest in using it on Power9. Instead don't allow it to be used in
   guests unless enabled explicitly at compile time.

 - A fix for a crash introduced by a recent change to FP handling.

 - Revert a change to our idle code that left Power10 with no idle
   support.

 - One minor fix for the new scv system call path to set PPR.

 - Fix a crash in our "generic" PMU if branch stack events were enabled.

 - A fix for the IMC PMU, to correctly identify host kernel samples.

 - The ADB_PMU powermac code was found to be incompatible with
   VMAP_STACK, so make them incompatible in Kconfig until the code can
   be fixed.

 - A build fix in drivers/video/fbdev/controlfb.c, and a documentation
   fix.

Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin,
Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan
Srinivasan.

* tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
  Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
  powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
  powerpc/perf: Fix crashes with generic_compat_pmu & BHRB
  powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
  powerpc/64s: scv entry should set PPR
  Documentation/powerpc: fix malformed table in syscall64-abi
  video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
  selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
  powerpc/64s: Disallow PROT_SAO in LPARs by default
  Revert "powerpc/64s: Remove PROT_SAO support"

powerpc/book3s64/radix: Fix boot failure with large amount of guest memory

2020-08-28T10:14:45+00:00

If the hypervisor doesn't support hugepages, the kernel ends up allocating a large
number of page table pages. The early page table allocation was wrongly
setting the max memblock limit to ppc64_rma_size with radix translation
which resulted in boot failure as shown below.

Kernel panic - not syncing:
early_alloc_pgtable: Failed to allocate 16777216 bytes align=0x1000000 nid=-1 from=0x0000000000000000 max_addr=0xffffffffffffffff
 CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-24.9-default+ #2
 Call Trace:
 [c0000000016f3d00] [c0000000007c6470] dump_stack+0xc4/0x114 (unreliable)
 [c0000000016f3d40] [c00000000014c78c] panic+0x164/0x418
 [c0000000016f3dd0] [c000000000098890] early_alloc_pgtable+0xe0/0xec
 [c0000000016f3e60] [c0000000010a5440] radix__early_init_mmu+0x360/0x4b4
 [c0000000016f3ef0] [c000000001099bac] early_init_mmu+0x1c/0x3c
 [c0000000016f3f10] [c00000000109a320] early_setup+0x134/0x170

This was because the kernel was checking for the radix feature before we enable the
feature via mmu_features. This resulted in the kernel using hash restrictions on
radix.

Rework the early init code such that the kernel boot with memblock restrictions
as imposed by hash. At that point, the kernel still hasn't finalized the
translation the kernel will end up using.

We have three different ways of detecting radix.

1. dt_cpu_ftrs_scan -> used only in case of PowerNV
2. ibm,pa-features -> Used when we don't use cpu_dt_ftr_scan
3. CAS -> Where we negotiate with hypervisor about the supported translation.

We look at 1 or 2 early in the boot and after that, we look at the CAS vector to
finalize the translation the kernel will use. We also support a kernel command
line option (disable_radix) to switch to hash.

Update the memblock limit after mmu_early_init_devtree() if the kernel is going
to use radix translation. This forces some of the memblock allocations we do before
mmu_early_init_devtree() to be within the RMA limit.

Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines")
Reported-by: Shirisha Ganta 
Signed-off-by: Aneesh Kumar K.V 
Reviewed-by: Hari Bathini 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200828100852.426575-1-aneesh.kumar@linux.ibm.com

lockdep: Only trace IRQ edges

2020-08-26T10:41:56+00:00

Problem:

  raw_local_irq_save(); // software state on
  local_irq_save(); // software state off
  ...
  local_irq_restore(); // software state still off, because we don't enable IRQs
  raw_local_irq_restore(); // software state still off, *whoopsie*

existing instances:

 - lock_acquire()
     raw_local_irq_save()
     __lock_acquire()
       arch_spin_lock(&graph_lock)
         pv_wait() := kvm_wait() (same or worse for Xen/HyperV)
           local_irq_save()

 - trace_clock_global()
     raw_local_irq_save()
     arch_spin_lock()
       pv_wait() := kvm_wait()
	 local_irq_save()

 - apic_retrigger_irq()
     raw_local_irq_save()
     apic->send_IPI() := default_send_IPI_single_phys()
       local_irq_save()

Possible solutions:

 A) make it work by enabling the tracing inside raw_*()
 B) make it work by keeping tracing disabled inside raw_*()
 C) call it broken and clean it up now

Now, given that the only reason to use the raw_* variant is because you don't
want tracing. Therefore A) seems like a weird option (although it can be done).
C) is tempting, but OTOH it ends up converting a _lot_ of code to raw just
because there is one raw user, this strips the validation/tracing off for all
the other users.

So we pick B) and declare any code that ends up doing:

	raw_local_irq_save()
	local_irq_save()
	lockdep_assert_irqs_disabled();

broken. AFAICT this problem has existed forever, the only reason it came
up is because commit: 859d069ee1dd ("lockdep: Prepare for NMI IRQ
state tracking") changed IRQ tracing vs lockdep recursion and the
first instance is fairly common, the other cases hardly ever happen.

Signed-off-by: Nicholas Piggin 
[rewrote changelog]
Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Steven Rostedt (VMware) 
Reviewed-by: Thomas Gleixner 
Acked-by: Rafael J. Wysocki 
Tested-by: Marco Elver 
Link: https://lkml.kernel.org/r/20200723105615.1268126-1-npiggin@gmail.com

powerpc/64s: Disallow PROT_SAO in LPARs by default

2020-08-24T04:12:54+00:00

Since migration of guests using SAO to ISA 3.1 hosts may cause issues,
disable PROT_SAO in LPARs by default and introduce a new Kconfig option
PPC_PROT_SAO_LPAR to allow users to enable it if desired.

Signed-off-by: Shawn Anastasio 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200821185558.35561-3-shawn@anastas.io

Revert "powerpc/64s: Remove PROT_SAO support"

2020-08-24T04:12:53+00:00

This reverts commit 5c9fa16e8abd342ce04dc830c1ebb2a03abf6c05.

Since PROT_SAO can still be useful for certain classes of software,
reintroduce it. Concerns about guest migration for LPARs using SAO
will be addressed next.

Signed-off-by: Shawn Anastasio 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200821185558.35561-2-shawn@anastas.io

Merge tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-08-23T18:37:23+00:00

Pull powerpc fixes from Michael Ellerman:

 - Add perf support for emitting extended registers for power10.

 - A fix for CPU hotplug on pseries, where on large/loaded systems we
   may not wait long enough for the CPU to be offlined, leading to
   crashes.

 - Addition of a raw cputable entry for Power10, which is not required
   to boot, but is required to make our PMU setup work correctly in
   guests.

 - Three fixes for the recent changes on 32-bit Book3S to move modules
   into their own segment for strict RWX.

 - A fix for a recent change in our powernv PCI code that could lead to
   crashes.

 - A change to our perf interrupt accounting to avoid soft lockups when
   using some events, found by syzkaller.

 - A change in the way we handle power loss events from the hypervisor
   on pseries. We no longer immediately shut down if we're told we're
   running on a UPS.

 - A few other minor fixes.

Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.

* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
  powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
  powerpc/pseries: Do not initiate shutdown when system is running on UPS
  powerpc/perf: Fix soft lockups due to missed interrupt accounting
  powerpc/powernv/pci: Fix possible crash when releasing DMA resources
  powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
  powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
  powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
  powerpc/fixmap: Fix the size of the early debug area
  powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
  powerpc/kernel: Cleanup machine check function declarations
  powerpc: Add POWER10 raw mode cputable entry
  powerpc/perf: Add extended regs support for power10 platform
  powerpc/perf: Add support for outputting extended regs in perf intr_regs
  powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2020-08-22T17:03:05+00:00

Pull kvm fixes from Paolo Bonzini:

 - PAE and PKU bugfixes for x86

 - selftests fix for new binutils

 - MMU notifier fix for arm64

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
  KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
  kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
  kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
  KVM: x86: fix access code passed to gva_to_gpa
  selftests: kvm: Use a shorter encoding to clear RAX

KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()

2020-08-21T22:03:47+00:00

The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.

Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.

Cc: 
Cc: Marc Zyngier 
Cc: Suzuki K Poulose 
Cc: James Morse 
Signed-off-by: Will Deacon 
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini