linux-toradex.git/arch/powerpc/kernel/cputable.c, branch v4.14

powerpc/8xx: Use symbolic PVR value

2017-08-10T13:32:18+00:00

For the 8xx, PVR values defined in arch/powerpc/include/asm/reg.h
are nowhere used.

Remove all defines and add PVR_8xx

Use it in arch/powerpc/kernel/cputable.c

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman

powerpc/8xx: Getting rid of remaining use of CONFIG_8xx

2017-08-10T13:32:12+00:00

Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx

arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"

arch/powerpc is now the only place with remaining use of
CONFIG_8xx: get rid of them.

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman

powerpc/47x: Guard 47x cputable entries with CONFIG_PPC_47x

2017-08-10T13:28:59+00:00

Currently we build the 47x cputable entries even when CONFIG_PPC_47x is
disabled. That means a kernel built without CONFIG_PPC_47x will claim to
support a 47x CPU and start booting, only to break somewhere later
because it doesn't have 47x support compiled in.

So guard the 47x cputable entries with CONFIG_PPC_47x. Note that this is
inside the #ifdef CONFIG_44x section, because 47x depends on 44x.

Signed-off-by: Michael Ellerman

powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions

2017-05-25T13:07:45+00:00

Providing "scv" support to userspace requires kernel support, so it
must be advertised as independently to the base ISA 3 instruction set.

The darn instruction relies on firmware enablement, so it has been
decided to split this out from the core ISA 3 feature as well.

Signed-off-by: Nicholas Piggin 
Acked-by: Benjamin Herrenschmidt 
Signed-off-by: Michael Ellerman

powerpc/64s: Support new device tree binding for discovering CPU features

2017-05-09T13:42:55+00:00

The ibm,powerpc-cpu-features device tree binding describes CPU features with
ASCII names and extensible compatibility, privilege, and enablement metadata
that allows improved flexibility and compatibility with new hardware.

The interface is described in detail in ibm,powerpc-cpu-features.txt in this
patch.

Currently this code is not enabled by default, and there are no released
firmwares that provide the binding.

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman

powerpc/64s: POWER9 machine check handler

2017-03-10T05:32:08+00:00

Add POWER9 machine check handler. There are several new types of errors
added, so logging messages for those are also added.

This doesn't attempt to reuse any of the P7/8 defines or functions,
because that becomes too complex. The better option in future is to use
a table driven approach.

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman

powerpc: Add POWER9 architected mode to cputable

2017-02-17T10:48:56+00:00

PVR value of 0x0F000005 means we are arch v3.00 compliant (i.e. POWER9).

Acked-by: Michael Neuling 
Signed-off-by: Russell Currey 
[mpe: Don't set num_pmcs, so we keep the PMU fields from the raw entry]
Signed-off-by: Michael Ellerman

powerpc/8xx: add dedicated machine check handler

2016-09-25T07:38:55+00:00

During a machine check, the 8xx provides indication of
whether the check is due to data or instruction access, so
let's display it.

Lets also move 8xx specific handling into the new handler.

Signed-off-by: Christophe Leroy 
Signed-off-by: Scott Wood

powerpc/book3s: Add a cpu table entry for different POWER9 revs

2016-09-13T07:37:09+00:00

Signed-off-by: Aneesh Kumar K.V 
Acked-by: Michael Neuling 
Signed-off-by: Michael Ellerman

powerpc: Add option to use jump label for mmu_has_feature()

2016-08-01T01:15:06+00:00

As we just did for CPU features.

Signed-off-by: Kevin Hao 
Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Michael Ellerman