linux-toradex.git/arch/powerpc/kernel/kvm.c, branch v5.7-rc5

powerpc/kvm: Explicitly mark kvm guest code as __init

2019-09-13T14:04:40+00:00

All the code in kvm.c can be marked __init. Most of it is already
inlined into the initcall, but not all. So instead of relying on the
inlining, mark it all as __init. This saves ~280 bytes of text for my
configuration.

Signed-off-by: Michael Ellerman 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20190911115746.12433-3-mpe@ellerman.id.au

powerpc/kvm: Move kvm_tmp into .text, shrink to 64K

2019-09-13T14:04:40+00:00

In some configurations of KVM, guests binary patch themselves to
avoid/reduce trapping into the hypervisor. For some instructions this
requires replacing one instruction with a sequence of instructions.

For those cases we need to write the sequence of instructions
somewhere and then patch the location of the original instruction to
branch to the sequence. That requires that the location of the
sequence be within 32MB of the original instruction.

The current solution for this is that we create a 1MB array in BSS,
write sequences into there, and then free the remainder of the array.

This has a few problems:
 - it confuses kmemleak.
 - it confuses lockdep.
 - it requires mapping kvm_tmp executable, which can cause adjacent
   areas to also be mapped executable if we're using 16M pages for the
   linear mapping.
 - the 32MB limit can be exceeded if the kernel is big enough,
   especially with STRICT_KERNEL_RWX enabled, which then prevents the
   patching from working at all.

We can fix all those problems by making kvm_tmp just a region of
regular .text. However currently it's 1MB in size, and we don't want
to waste 1MB of text. In practice however I only see ~30KB of kvm_tmp
being used even for an allyes_config. So shrink kvm_tmp to 64K, which
ought to be enough for everyone, and move it into .text.

Signed-off-by: Michael Ellerman 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20190911115746.12433-1-mpe@ellerman.id.au

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 266

2019-06-05T15:30:28+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation 51 franklin street fifth floor boston ma 02110
  1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 67 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Reviewed-by: Alexios Zavras 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141333.953658117@linutronix.de
Signed-off-by: Greg Kroah-Hartman

kmemleak: powerpc: skip scanning holes in the .bss section

2019-04-06T02:02:30+00:00

Commit 2d4f567103ff ("KVM: PPC: Introduce kvm_tmp framework") adds
kvm_tmp[] into the .bss section and then free the rest of unused spaces
back to the page allocator.

kernel_init
  kvm_guest_init
    kvm_free_tmp
      free_reserved_area
        free_unref_page
          free_unref_page_prepare

With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel.  As the
result, kmemleak scan will trigger a panic when it scans the .bss
section with unmapped pages.

This patch creates dedicated kmemleak objects for the .data, .bss and
potentially .data..ro_after_init sections to allow partial freeing via
the kmemleak_free_part() in the powerpc kvm_free_tmp() function.

Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas 
Reported-by: Qian Cai 
Acked-by: Michael Ellerman  (powerpc)
Tested-by: Qian Cai 
Cc: Paul Mackerras 
Cc: Benjamin Herrenschmidt 
Cc: Avi Kivity 
Cc: Paolo Bonzini 
Cc: Radim Krcmar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

powerpc/kvm: Prefer fault_in_pages_readable function

2018-05-17T04:12:40+00:00

Directly use fault_in_pages_readable instead of manual __get_user code. Fix
warning treated as error with W=1:

  arch/powerpc/kernel/kvm.c:675:6: error: variable ‘tmp’ set but not used [-Werror=unused-but-set-variable]

Suggested-by: Christophe Leroy 
Signed-off-by: Mathieu Malaterre 
Reviewed-by: Christophe Leroy 
Signed-off-by: Michael Ellerman

powerpc/64: Fix watchdog configuration regressions

2017-08-31T04:26:00+00:00

This fixes a couple more bits of fallout from the new hard lockup watchdog
patch.

It restores the required hw_nmi_get_sample_period() function for the
perf watchdog, and removes some function declarations on 64e that are only
defined for 64s. This fixes the 64e build when the hardlockup detector is
enabled.

It restores the default behaviour of disabling the perf watchdog, and also
fixes disabling the 64s watchdog when running as a guest.

Fixes: 2104180a53 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman

powerpc/64s: implement arch-specific hardlockup watchdog

2017-07-12T23:26:02+00:00

Implement an arch-speicfic watchdog rather than use the perf-based
hardlockup detector.

The new watchdog takes the soft-NMI directly, rather than going through
perf.  Perf interrupts are to be made maskable in future, so that would
prevent the perf detector from working in those regions.

Additionally, implement a SMP based detector where all CPUs watch one
another by pinging a shared cpumask.  This is because powerpc Book3S
does not have a true periodic local NMI, but some platforms do implement
a true NMI IPI.

If a CPU is stuck with interrupts hard disabled, the soft-NMI watchdog
does not work, but the SMP watchdog will.  Even on platforms without a
true NMI IPI to get a good trace from the stuck CPU, other CPUs will
notice the lockup sufficiently to report it and panic.

[npiggin@gmail.com: honor watchdog disable at boot/hotplug]
  Link: http://lkml.kernel.org/r/20170621001346.5bb337c9@roar.ozlabs.ibm.com
[npiggin@gmail.com: fix false positive warning at CPU unplug]
  Link: http://lkml.kernel.org/r/20170630080740.20766-1-npiggin@gmail.com
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170616065715.18390-6-npiggin@gmail.com
Signed-off-by: Nicholas Piggin 
Reviewed-by: Don Zickus 
Tested-by: Babu Moger 	[sparc]
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

powerpc: Remove redundant breaks

2015-08-06T05:10:20+00:00

break; break; isn't useful.

Remove one.

Signed-off-by: Joe Perches 
Signed-off-by: Michael Ellerman

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into next

2014-06-04T15:47:12+00:00

Pull KVM updates from Paolo Bonzini:
 "At over 200 commits, covering almost all supported architectures, this
  was a pretty active cycle for KVM.  Changes include:

   - a lot of s390 changes: optimizations, support for migration, GDB
     support and more

   - ARM changes are pretty small: support for the PSCI 0.2 hypercall
     interface on both the guest and the host (the latter acked by
     Catalin)

   - initial POWER8 and little-endian host support

   - support for running u-boot on embedded POWER targets

   - pretty large changes to MIPS too, completing the userspace
     interface and improving the handling of virtualized timer hardware

   - for x86, a larger set of changes is scheduled for 3.17.  Still, we
     have a few emulator bugfixes and support for running nested
     fully-virtualized Xen guests (para-virtualized Xen guests have
     always worked).  And some optimizations too.

  The only missing architecture here is ia64.  It's not a coincidence
  that support for KVM on ia64 is scheduled for removal in 3.17"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits)
  KVM: add missing cleanup_srcu_struct
  KVM: PPC: Book3S PR: Rework SLB switching code
  KVM: PPC: Book3S PR: Use SLB entry 0
  KVM: PPC: Book3S HV: Fix machine check delivery to guest
  KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs
  KVM: PPC: Book3S HV: Make sure we don't miss dirty pages
  KVM: PPC: Book3S HV: Fix dirty map for hugepages
  KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address
  KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates()
  KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number
  KVM: PPC: Book3S: Add ONE_REG register names that were missed
  KVM: PPC: Add CAP to indicate hcall fixes
  KVM: PPC: MPIC: Reset IRQ source private members
  KVM: PPC: Graciously fail broken LE hypercalls
  PPC: ePAPR: Fix hypercall on LE guest
  KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler
  KVM: PPC: BOOK3S: Always use the saved DAR value
  PPC: KVM: Make NX bit available with magic page
  KVM: PPC: Disable NX for old magic page using guests
  KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest
  ...

PPC: KVM: Make NX bit available with magic page

2014-05-30T12:26:25+00:00

Because old kernels enable the magic page and then choke on NXed trampoline
code we have to disable NX by default in KVM when we use the magic page.

However, since commit b18db0b8 we have successfully fixed that and can now
leave NX enabled, so tell the hypervisor about this.

Signed-off-by: Alexander Graf