linux-toradex.git/arch/powerpc/kernel/setup_32.c, branch v3.3.5

powerpc: Copy down exception vectors after feature fixups

2011-11-16T03:47:54+00:00

kdump fails because we try to execute an HV only instruction. Feature
fixups are being applied after we copy the exception vectors down to 0
so they miss out on any updates.

We have always had this issue but it only became critical in v3.0
when we added CFAR support (breaks POWER5) and v3.1 when we added
POWERNV (breaks everyone).

Signed-off-by: Anton Blanchard 
Cc:  [v3.0+]
Signed-off-by: Benjamin Herrenschmidt

powerpc/32: Pass device tree address as u64 to machine_init

2011-09-19T23:19:47+00:00

u64 is used rather than phys_addr_t to keep things simple, as
this is called from assembly code.

Update callers to pass a 64-bit address in r3/r4.  Other unused
register assignments that were once parameters to machine_init
are dropped.

For FSL BookE, look up the physical address of the device tree from the
effective address passed in r3 by the loader.  This is required for
situations where memory does not start at zero (due to AMP or IOMMU-less
virtualization), and thus the IMA doesn't start at zero, and thus the
device tree effective address does not equal the physical address.

Signed-off-by: Scott Wood 
Signed-off-by: Benjamin Herrenschmidt

Merge remote-tracking branch 'jwb/next' into next

2011-07-22T03:16:41+00:00

powerpc: Exporting boot_cpuid_phys

2011-07-19T05:13:34+00:00

Kernel loadable module can use hard_smp_processor_id() if building with SMP
kernel. In order to make it work for UP kernels too, boot_cpuid_phys
symbol (which is what hard_smp_processor_id() macro resolves to
in non-SMP configuration) must be exported.

Signed-off-by: Andrew Gabbasov 
Signed-off-by: Benjamin Herrenschmidt

powerpc/44x: don't use tlbivax on AMP systems

2011-07-12T13:21:55+00:00

Since other OS's may be running on the other cores don't use tlbivax

Signed-off-by: Dave Kleikamp 
Signed-off-by: Tony Breeds 
Cc: Benjamin Herrenschmidt 
Cc: Josh Boyer 
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Josh Boyer

powerpc: Fix early boot accounting of CPUs

2011-06-17T06:19:51+00:00

smp_release_cpus() waits for all cpus (including the bootcpu) due to an
off-by-one count on boot_cpu_count (which is all CPUs).  This patch replaces
that with spinning_secondaries (which is all secondary CPUs).

Signed-off-by: Matt Evans 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Properly handshake CPUs going out of boot spin loop

2011-04-20T01:03:24+00:00

We need to wait a bit for them to have done their CPU setup
or we might end up with translation and EE on with different
LPCR values between threads

Signed-off-by: Benjamin Herrenschmidt

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2010-10-22T04:19:54+00:00

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
  powerpc/44x: Update ppc44x_defconfig
  powerpc/watchdog: Make default timeout for Book-E watchdog a Kconfig option
  fsl_rio: Add comments for sRIO registers.
  powerpc/fsl-booke: Add e55xx (64-bit) smp defconfig
  powerpc/fsl-booke: Add p5020 DS board support
  powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips
  powerpc/fsl-booke: Add support for FSL Arch v1.0 MMU in setup_page_sizes
  powerpc/fsl-booke: Add support for FSL 64-bit e5500 core
  powerpc/85xx: add cache-sram support
  powerpc/85xx: add ngPIXIS FPGA device tree node to the P1022DS board
  powerpc: Fix compile error with paca code on ppc64e
  powerpc/fsl-booke: Add p3041 DS board support
  oprofile/fsl emb: Don't set MSR[PMM] until after clearing the interrupt.
  powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chips
  powerpc/mpc8xxx_gpio: Add support for 'qoriq-gpio' controllers
  powerpc/fsl_booke: Add support to boot from core other than 0
  powerpc/p1022: Add probing for individual DMA channels
  powerpc/fsl_soc: Search all global-utilities nodes for rstccr
  powerpc: Fix invalid page flags in create TLB CAM path for PTE_64BIT
  powerpc/mpc83xx: Support for MPC8308 P1M board
  ...

Fix up conflict with the generic irq_work changes in arch/powerpc/kernel/time.c

powerpc/fsl_booke: Add support to boot from core other than 0

2010-10-14T05:52:58+00:00

First we check to see if we are the first core booting up. This
is accomplished by comparing the boot_cpuid with -1, if it is we
assume this is the first core coming up.

Secondly, we need to update the initial thread info structure
to reflect the actual cpu we are running on otherwise
smp_processor_id() and related functions will return the default
initialization value of the struct or 0.

Signed-off-by: Matthew McClintock 
Signed-off-by: Kumar Gala

Merge commit 'v2.6.36-rc3' into x86/memblock

2010-08-31T07:45:46+00:00

Conflicts:
	arch/x86/kernel/trampoline.c
	mm/memblock.c

Merge reason: Resolve the conflicts, update to latest upstream.

Signed-off-by: Ingo Molnar