linux-toradex.git/arch/powerpc/kernel, branch v3.2.44

powerpc: Fix cputable entry for 970MP rev 1.0

2013-03-27T02:41:02+00:00

commit d63ac5f6cf31c8a83170a9509b350c1489a7262b upstream.

Commit 44ae3ab3358e962039c36ad4ae461ae9fb29596c forgot to update
the entry for the 970MP rev 1.0 processor when moving some CPU
features bits to the MMU feature bit mask. This breaks booting
on some rare G5 models using that chip revision.

Reported-by: Phileas Fogg 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

Revert "powerpc/eeh: Fix crash when adding a device in a slot with DDW"

2013-03-20T15:03:15+00:00

This reverts commit 066f289835f09a3f744d6bac96f25e25d20b3ded which was
6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.

This was not needed and is not suitable for 3.2.y.

Reported-by: Michael Neuling 
Signed-off-by: Ben Hutchings

powerpc/kexec: Disable hard IRQ before kexec

2013-03-06T03:24:11+00:00

commit 8520e443aa56cc157b015205ea53e7b9fc831291 upstream.

Disable hard IRQ before kexec a new kernel image.
Not doing it can result in corrupted data in the memory segments
reserved for the new kernel.

Signed-off-by: Phileas Fogg 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

powerpc/eeh: Fix crash when adding a device in a slot with DDW

2013-03-06T03:22:36+00:00

commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.

The DDW code uses a eeh_dev struct from the pci_dev. However, this is
not set until eeh_add_device_late is called.

Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
devices are added to the bus, making drivers' probe hooks to be called.
These will call set_dma_mask, which will call the DDW code, which will
require the eeh_dev struct from pci_dev. This would result in a crash,
due to a NULL dereference.

Calling eeh_add_device_late after pci_bus_add_devices would make the
system BUG, because device files shouldn't be added to devices there
were not added to the system. So, a new function is needed to add such
files only after pci_bus_add_devices have been called.

Signed-off-by: Thadeu Lima de Souza Cascardo 
Acked-by: Gavin Shan 
Signed-off-by: Benjamin Herrenschmidt 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

powerpc/vdso: Remove redundant locking in update_vsyscall_tz()

2013-01-16T01:13:16+00:00

commit ce73ec6db47af84d1466402781ae0872a9e7873c upstream.

The locking in update_vsyscall_tz() is not only unnecessary because the vdso
code copies the data unproteced in __kernel_gettimeofday() but also
introduces a hard to reproduce race condition between update_vsyscall()
and update_vsyscall_tz(), which causes user space process to loop
forever in vdso code.

The following patch removes the locking from update_vsyscall_tz().

Locking is not only unnecessary because the vdso code copies the data
unprotected in __kernel_gettimeofday() but also erroneous because updating
the tb_update_count is not atomic and introduces a hard to reproduce race
condition between update_vsyscall() and update_vsyscall_tz(), which further
causes user space process to loop forever in vdso code.

The below scenario describes the race condition,
x==0	Boot CPU			other CPU
	proc_P: x==0
	    timer interrupt
		update_vsyscall
x==1		    x++;sync		settimeofday
					    update_vsyscall_tz
x==2						x++;sync
x==3		    sync;x++
						sync;x++
	proc_P: x==3 (loops until x becomes even)

Because the ++ operator would be implemented as three instructions and not
atomic on powerpc.

A similar change was made for x86 in commit 6c260d58634
("x86: vdso: Remove bogus locking in update_vsyscall_tz")

Signed-off-by: Shan Hai 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

powerpc: Fix CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n build

2013-01-03T03:33:09+00:00

commit 11ee7e99f35ecb15f59b21da6a82d96d2cd3fcc8 upstream.

If we build a kernel with CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n,
the kernel fails when we run at a non zero offset. It turns out
we were incorrectly wrapping some of the relocatable kernel code
with CONFIG_CRASH_DUMP.

Signed-off-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

powerpc: Make sure IPI handlers see data written by IPI senders

2012-09-19T14:04:42+00:00

commit 9fb1b36ca1234e64a5d1cc573175303395e3354d upstream.

We have been observing hangs, both of KVM guest vcpu tasks and more
generally, where a process that is woken doesn't properly wake up and
continue to run, but instead sticks in TASK_WAKING state.  This
happens because the update of rq->wake_list in ttwu_queue_remote()
is not ordered with the update of ipi_message in
smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in
scheduler_ipi() is not ordered with the reading of ipi_message in
smp_ipi_demux().  Thus it is possible for the IPI receiver not to see
the updated rq->wake_list and therefore conclude that there is nothing
for it to do.

In order to make sure that anything done before smp_send_reschedule()
is ordered before anything done in the resulting call to scheduler_ipi(),
this adds barriers in smp_muxed_message_pass() and smp_ipi_demux().
The barrier in smp_muxed_message_pass() is a full barrier to ensure that
there is a full ordering between the smp_send_reschedule() caller and
scheduler_ipi().  In smp_ipi_demux(), we use xchg() rather than
xchg_local() because xchg() includes release and acquire barriers.
Using xchg() rather than xchg_local() makes sense given that
ipi_message is not just accessed locally.

This moves the barrier between setting the message and calling the
cause_ipi() function into the individual cause_ipi implementations.
Most of them -- those that used outb, out_8 or similar -- already had
a full barrier because out_8 etc. include a sync before the MMIO
store.  This adds an explicit barrier in the two remaining cases.

These changes made no measurable difference to the speed of IPIs as
measured using a simple ping-pong latency test across two CPUs on
different cores of a POWER7 machine.

The analysis of the reason why processes were not waking up properly
is due to Milton Miller.

Reported-by: Milton Miller 
Signed-off-by: Paul Mackerras 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

powerpc: Restore correct DSCR in context switch

2012-09-19T14:04:42+00:00

commit 714332858bfd40dcf8f741498336d93875c23aa7 upstream.

During a context switch we always restore the per thread DSCR value.
If we aren't doing explicit DSCR management
(ie thread.dscr_inherit == 0) and the default DSCR changed while
the process has been sleeping we end up with the wrong value.

Check thread.dscr_inherit and select the default DSCR or per thread
DSCR as required.

This was found with the following test case, when running with
more threads than CPUs (ie forcing context switching):

http://ozlabs.org/~anton/junkcode/dscr_default_test.c

With the four patches applied I can run a combination of all
test cases successfully at the same time:

http://ozlabs.org/~anton/junkcode/dscr_default_test.c
http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c
http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c

Signed-off-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

powerpc: Fix DSCR inheritance in copy_thread()

2012-09-19T14:04:41+00:00

commit 1021cb268b3025573c4811f1dee4a11260c4507b upstream.

If the default DSCR is non zero we set thread.dscr_inherit in
copy_thread() meaning the new thread and all its children will ignore
future updates to the default DSCR. This is not intended and is
a change in behaviour that a number of our users have hit.

We just need to inherit thread.dscr and thread.dscr_inherit from
the parent which ends up being much simpler.

This was found with the following test case:

http://ozlabs.org/~anton/junkcode/dscr_default_test.c

Signed-off-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

powerpc: Keep thread.dscr and thread.dscr_inherit in sync

2012-09-19T14:04:41+00:00

commit 00ca0de02f80924dfff6b4f630e1dff3db005e35 upstream.

When we update the DSCR either via emulation of mtspr(DSCR) or via
a change to dscr_default in sysfs we don't update thread.dscr.
We will eventually update it at context switch time but there is
a period where thread.dscr is incorrect.

If we fork at this point we will copy the old value of thread.dscr
into the child. To avoid this, always keep thread.dscr in sync with
reality.

This issue was found with the following testcase:

http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c

Signed-off-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings