linux-toradex.git/arch/powerpc/kvm/e500mc.c, branch v5.17

KVM: PPC: Kill kvmppc_ops::mmu_destroy() and kvmppc_mmu_destroy()

2020-03-19T05:43:07+00:00

These are only used by HV KVM and BookE, and in both cases they are
nops.

Signed-off-by: Greg Kurz 
Signed-off-by: Paul Mackerras

KVM: PPC: Move kvm_vcpu_init() invocation to common code

2020-01-24T08:19:01+00:00

Move the kvm_cpu_{un}init() calls to common PPC code as an intermediate
step towards removing kvm_cpu_{un}init() altogether.

No functional change intended.

Signed-off-by: Sean Christopherson 
Signed-off-by: Paolo Bonzini

KVM: PPC: e500mc: Move reset of oldpir below call to kvm_vcpu_init()

2020-01-24T08:19:00+00:00

Move the initialization of oldpir so that the call to kvm_vcpu_init() is
at the top of kvmppc_core_vcpu_create_e500mc().  oldpir is only use
when loading/putting a vCPU, which currently cannot be done until after
kvm_arch_vcpu_create() completes.  Reording the call to kvm_vcpu_init()
paves the way for moving the invocation to common PPC code.

No functional change intended.

Signed-off-by: Sean Christopherson 
Signed-off-by: Paolo Bonzini

KVM: PPC: Allocate vcpu struct in common PPC code

2020-01-24T08:18:59+00:00

Move allocation of all flavors of PPC vCPUs to common PPC code.  All
variants either allocate 'struct kvm_vcpu' directly, or require that
the embedded 'struct kvm_vcpu' member be located at offset 0, i.e.
guarantee that the allocation can be directly interpreted as a 'struct
kvm_vcpu' object.

Remove the message from the build-time assertion regarding placement of
the struct, as compatibility with the arch usercopy region is no longer
the sole dependent on 'struct kvm_vcpu' being at offset zero.

Signed-off-by: Sean Christopherson 
Signed-off-by: Paolo Bonzini

KVM: PPC: e500mc: Add build-time assert that vcpu is at offset 0

2020-01-24T08:18:58+00:00

In preparation for moving vcpu allocation to common PPC code, add an
explicit, albeit redundant, build-time assert to ensure the vcpu member
is located at offset 0.  The assert is redundant in the sense that
kvmppc_core_vcpu_create_e500() contains a functionally identical assert.
The motiviation for adding the extra assert is to provide visual
confirmation of the correctness of moving vcpu allocation to common
code.

Signed-off-by: Sean Christopherson 
Signed-off-by: Paolo Bonzini

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

powerpc: remove unnecessary inclusion of asm/tlbflush.h

2018-07-30T12:48:20+00:00

asm/tlbflush.h is only needed for:
- using functions xxx_flush_tlb_xxx()
- using MMU_NO_CONTEXT
- including asm-generic/pgtable.h

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman

KVM: PPC: e500mc: Fix a NULL dereference

2017-08-31T02:36:44+00:00

We should set "err = -ENOMEM;", otherwise it means we're returning
ERR_PTR(0) which is NULL.  It results in a NULL pointer dereference in
the caller.

Signed-off-by: Dan Carpenter 
Signed-off-by: Paul Mackerras

powerpc: Fix misspellings in comments.

2016-03-01T08:27:20+00:00

Signed-off-by: Adam Buchbinder 
Signed-off-by: Michael Ellerman

powerpc: Replace __get_cpu_var uses

2014-11-03T01:12:32+00:00

This still has not been merged and now powerpc is the only arch that does
not have this change. Sorry about missing linuxppc-dev before.

V2->V2
  - Fix up to work against 3.18-rc1

__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x).  This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less registers
are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e.  using a global
register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	__this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	__this_cpu_inc(y)

Cc: Benjamin Herrenschmidt 
CC: Paul Mackerras 
Signed-off-by: Christoph Lameter 
[mpe: Fix build errors caused by set/or_softirq_pending(), and rework
      assignment in __set_breakpoint() to use memcpy().]
Signed-off-by: Michael Ellerman