linux-toradex.git/arch/powerpc/kvm/emulate.c, branch v5.18

KVM: PPC: Clean up redundant 'kvm_run' parameters

2020-05-27T01:39:31+00:00

In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu'
structure. For historical reasons, many kvm-related function parameters
retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This
patch does a unified cleanup of these remaining redundant parameters.

Signed-off-by: Tianjia Zhang 
Reviewed-by: Vitaly Kuznetsov 
Reviewed-by: Paul Mackerras 
Signed-off-by: Paul Mackerras

Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-next

2019-08-23T04:08:04+00:00

This merges in fixes for the XIVE interrupt controller which touch both
generic powerpc and PPC KVM code.  To avoid merge conflicts, these
commits will go upstream via the powerpc tree as well as the KVM tree.

Signed-off-by: Paul Mackerras

KVM: PPC: Book3S PR: Fix software breakpoints

2019-06-17T06:20:43+00:00

QEMU's kvm_handle_debug() function identifies software breakpoints by checking
for a value of 0 in kvm_debug_exit_arch's status field. Since this field isn't
explicitly set to 0 when the software breakpoint instruction is detected, any
previous non-zero value present causes a hang in QEMU as it tries to process
the breakpoint instruction incorrectly as a hardware breakpoint.

Ensure that the kvm_debug_exit_arch status field is set to 0 when the software
breakpoint instruction is detected (similar to the existing logic in booke.c
and e500_emulate.c) to restore software breakpoint functionality under Book3S
PR.

Signed-off-by: Mark Cave-Ayland 
Reviewed-by: Fabiano Rosas 
Signed-off-by: Paul Mackerras

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 266

2019-06-05T15:30:28+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation 51 franklin street fifth floor boston ma 02110
  1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 67 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Reviewed-by: Alexios Zavras 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141333.953658117@linutronix.de
Signed-off-by: Greg Kroah-Hartman

KVM: PPC: Use exported tb_to_ns() function in decrementer emulation

2018-10-26T10:58:58+00:00

This changes the KVM code that emulates the decrementer function to do
the conversion of decrementer values to time intervals in nanoseconds
by calling the tb_to_ns() function exported by the powerpc timer code,
in preference to open-coded arithmetic using values from the
decrementer_clockevent struct.  Similarly, the HV-KVM code that did
the same conversion using arithmetic on tb_ticks_per_sec also now
uses tb_to_ns().

Signed-off-by: Paul Mackerras 
Signed-off-by: Michael Ellerman

powerpc/64s: Remove POWER4 support

2018-03-31T13:47:50+00:00

POWER4 has been broken since at least the change 49d09bf2a6
("powerpc/64s: Optimise MSR handling in exception handling"), which
requires mtmsrd L=1 support. This was introduced in ISA v2.01, and
POWER4 supports ISA v2.00.

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman

KVM: PPC: Book3S HV: Enable guests to use large decrementer mode on POWER9

2017-06-19T04:02:04+00:00

This allows userspace (e.g. QEMU) to enable large decrementer mode for
the guest when running on a POWER9 host, by setting the LPCR_LD bit in
the guest LPCR value.  With this, the guest exit code saves 64 bits of
the guest DEC value on exit.  Other places that use the guest DEC
value check the LPCR_LD bit in the guest LPCR value, and if it is set,
omit the 32-bit sign extension that would otherwise be done.

This doesn't change the DEC emulation used by PR KVM because PR KVM
is not supported on POWER9 yet.

This is partly based on an earlier patch by Oliver O'Halloran.

Signed-off-by: Paul Mackerras

KVM: PPC: Book3S PR: Do not fail emulation with mtspr/mfspr for unknown SPRs

2017-04-20T01:39:32+00:00

According to the PowerISA 2.07, mtspr and mfspr should not always
generate an illegal instruction exception when being used with an
undefined SPR, but rather treat the instruction as a NOP or inject a
privilege exception in some cases, too - depending on the SPR number.
Also turn the printk here into a ratelimited print statement, so that
the guest can not flood the dmesg log of the host by issueing lots of
illegal mtspr/mfspr instruction here.

Signed-off-by: Thomas Huth 
Signed-off-by: Paul Mackerras

KVM: PPC: Book3S PR: Fix illegal opcode emulation

2016-06-20T04:11:25+00:00

If kvmppc_handle_exit_pr() calls kvmppc_emulate_instruction() to emulate
one instruction (in the BOOK3S_INTERRUPT_H_EMUL_ASSIST case), it calls
kvmppc_core_queue_program() afterwards if kvmppc_emulate_instruction()
returned EMULATE_FAIL, so the guest gets an program interrupt for the
illegal opcode.
However, the kvmppc_emulate_instruction() also tried to inject a
program exception for this already, so the program interrupt gets
injected twice and the return address in srr0 gets destroyed.
All other callers of kvmppc_emulate_instruction() are also injecting
a program interrupt, and since the callers have the right knowledge
about the srr1 flags that should be used, it is the function
kvmppc_emulate_instruction() that should _not_ inject program
interrupts, so remove the kvmppc_core_queue_program() here.

This fixes the issue discovered by Laurent Vivier with kvm-unit-tests
where the logs are filled with these messages when the test tries
to execute an illegal instruction:

     Couldn't emulate instruction 0x00000000 (op 0 xop 0)
     kvmppc_handle_exit_pr: emulation at 700 failed (00000000)

Signed-off-by: Thomas Huth 
Reviewed-by: Alexander Graf 
Tested-by: Laurent Vivier 
Signed-off-by: Paul Mackerras

KVM: PPC: Pass enum to kvmppc_get_last_inst

2014-09-22T08:11:36+00:00

The kvmppc_get_last_inst function recently received a facelift that allowed
us to pass an enum of the type of instruction we want to read into it rather
than an unreadable boolean.

Unfortunately, not all callers ended up passing the enum. This wasn't really
an issue as "true" and "false" happen to match the two enum values we have,
but it's still hard to read.

Update all callers of kvmppc_get_last_inst() to follow the new calling
convention.

Signed-off-by: Alexander Graf