linux-toradex.git/arch/powerpc/platforms/ps3/device-init.c, branch v3.2.20

powerpc/irq: Remove IRQF_DISABLED

2011-11-08T03:51:46+00:00

Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang 
Acked-by: Arnd Bergmann 
Acked-by: Geoff Levand 
Signed-off-by: Benjamin Herrenschmidt

tree-wide: fix comment/printk typos

2010-11-01T19:38:34+00:00

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Jiri Kosina

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn

powerpc/ps3: Printing fixups for l64 to ll64 conversion arch/powerpc

2009-01-16T05:15:13+00:00

Signed-off-by: Stephen Rothwell 
Acked-by: Geoff Levand 
Signed-off-by: Benjamin Herrenschmidt

mtd/ps3vram: Add ps3vram driver for accessing video RAM as MTD

2009-01-08T05:25:14+00:00

Add ps3vram driver, which exposes unused video RAM on the PS3 as a MTD
device suitable for storage or swap.  Fast data transfer is achieved
using a local cache in system RAM and DMA transfers via the GPU.

Signed-off-by: Vivien Chappelier 
Signed-off-by: Jim Paris 
Acked-by: Geoff Levand 
Acked-by: David Woodhouse 
Signed-off-by: Benjamin Herrenschmidt

powerpc/ps3: Add sub-match id modalias support

2008-12-16T03:39:33+00:00

commit 059e4938f8b060b10c4352e6c45739473bc73267 ("powerpc/ps3: Add a sub-match
id to ps3_system_bus") forgot to update the module alias support:
  - Add the sub-match ids to the module aliases, so udev can distinguish
    between different types of sub-devices.
  - Rename PS3_MODULE_ALIAS_GRAPHICS to PS3_MODULE_ALIAS_GPU_FB, as ps3fb
    binds to the "FB" sub-device.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Geoff Levand 
Signed-off-by: Paul Mackerras

powerpc/ps3: Fix memory leak in device init

2008-11-05T22:49:35+00:00

Free dynamically allocated device data structures when device registration
fails.  This fixes memory leakage when the registration fails.

Signed-off-by: Masakazu Mokuno 
Signed-off-by: Geoff Levand 
Signed-off-by: Paul Mackerras

powerpc/ps3: Add a sub-match id to ps3_system_bus

2008-07-22T00:39:33+00:00

Add sub match id for ps3 system bus so that two different system bus
devices can be connected to a shared device.

Signed-off-by: Masakazu Mokuno 
Signed-off-by: Geoff Levand 
Signed-off-by: Benjamin Herrenschmidt

[POWERPC] PS3: Split device setup for static vs. dynamic devices

2008-04-01T09:43:09+00:00

Split the device setup code in ps3_register_repository_device() in two
routines:
  1. ps3_setup_static_device(), to handle the setup of static devices in the
     PS3 repository, which can be __init,
  2. ps3_setup_dynamic_device(), to handle the setup of storage devices that
     may appear later in the PS3 repository.

This fixes a few section mismatch warnings.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Geoff Levand 
Signed-off-by: Paul Mackerras

[POWERPC] PS3: Add logical performance monitor device support

2008-01-25T11:52:52+00:00

Add PS3 logical performance monitor device support to the
PS3 system-bus and platform device registration routines.

Signed-off-by: Geoff Levand 
Signed-off-by: Paul Mackerras