linux-toradex.git/arch/powerpc/sysdev/Makefile, branch v2.6.18.3

[POWERPC] back up old school ipic.[hc] to arch/ppc

2006-08-30T00:34:33+00:00

Keep from breaking 83xx arch/ppc build.  Back up old school arch/powerpc/sysdev/ipic.[hc] to arch/ppc/syslib.

Signed-off-by: Kim Phillips 
Signed-off-by: Paul Mackerras

[POWERPC] Copy i8259 code back to arch/ppc

2006-07-03T09:55:30+00:00

This copies the i8259 interrupt controller driver from arch/powerpc
to arch/ppc. It's currently shared by both architectures, but the upcoming
arch/powerpc interrupt changes will break the arch/ppc builds. The changes
are too important to just use #ifdef's in the driver.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[POWERPC] todc: add support for Time-Of-Day-Clock

2006-06-29T06:22:46+00:00

This is a resubmit with a proper subject and with all comments addressed.
Applies cleanly to powerpc.git 649e85797259162f7fdc696420e7492f20226f2d

Mark
--

The todc code from arch/ppc supports many todc/rtc chips and is needed
in arch/powerpc.  This patch adds the todc code to arch/powerpc.

Signed-off-by: Mark A. Greer 
--

 arch/powerpc/Kconfig         |    7
 arch/powerpc/sysdev/Makefile |    1
 arch/powerpc/sysdev/todc.c   |  392 ++++++++++++++++++++++++++++++++++
 include/asm-powerpc/todc.h   |  487 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 887 insertions(+)
--
Signed-off-by: Paul Mackerras

[POWERPC] Add tsi108 pci and platform device data register function

2006-06-29T06:20:36+00:00

Add Tundra Semiconductor tsi108 pci and platform device data register
function support.

Signed-off-by: Alexandre Bounine 
Signed-off-by: Roy Zang	

 ---
Signed-off-by: Paul Mackerras

[POWERPC] Optimise some TOC usage

2006-06-15T09:31:25+00:00

Micro-optimisation - add no-minimal-toc to some more arch/powerpc Makefiles.

Signed-off-by: Anton Blanchard 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: Add FSL SOC library and setup code

2006-01-14T00:13:22+00:00

Parse the flat device tree for devices on Freescale SOC's that we know
about (gianfar, gianfar_mdio, i2c, mpc83xx_wdt).  We need to setup
platform devices and platform data for these devices to match arch/ppc
usage.

Also add a helper function (get_immrbase) that reports the base
address of the MMIO registers on the SOC.

Signed-off-by: Kumar Gala 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: Updated Kconfig and Makefiles for 83xx support

2006-01-11T04:35:29+00:00

Updated Kconfig & Makefiles in prep for adding support for the Freescale
MPC83xx family of processors to arch/powerpc.  Moved around some config
options that are more globally applicable to other PowerPC processors.
Added a temporary config option (83xx) to match existing arch/ppc support
for the MPC83xx line.

Signed-off-by: Kumar Gala 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: Experimental support for new G5 Macs (#2)

2006-01-09T04:03:17+00:00

This adds some very basic support for the new machines, including the
Quad G5 (tested), and other new dual core based machines and iMac G5
iSight (untested). This is still experimental !  There is no thermal
control yet, there is no proper handing of MSIs, etc.. but it
boots, I have all 4 cores up on my machine. Compared to the previous
version of this patch, this one adds DART IOMMU support for the U4
chipset and thus should work fine on setups with more than 2Gb of RAM.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: moved ipic code to arch/powerpc

2006-01-09T03:48:57+00:00

Moved 83xx and QUICC Engine interrupt handling code into arch/powerpc
as a precursor of getting 83xx sub-arch building in arch/powerpc.

Signed-off-by: Kumar Gala 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: move mmio_nvram.c over to arch/powerpc

2005-11-01T10:03:04+00:00

The nvram code formally known as bpa_nvram.c is rather
generic really, so it is quite likely to be useful to
future boards not based on cell.

This patch puts it into arch/powerpc/sysdev.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Paul Mackerras