linux-toradex.git/arch/powerpc/sysdev/cpm2.c, branch v3.4.73

powerpc/fsl-cpm: Configure clock correctly for SCC

2010-04-20T04:13:03+00:00

Some board setup functions call cpm1_clk_setup() or cmp2_clk_setup()
to configure the clock source.

If CPM_CLK_RTX has been used for the parameter mode,
the clock has been configured only for TX but not for RX.

With this patch CPM_CLK_RTX configures the clock for both directions
correctly.

Signed-off-by: Wolfgang Ocker 
Acked-by: Scott Wood 
Signed-off-by: Kumar Gala

powerpc/cpm: Remove some cruft code and defines

2009-05-19T05:47:19+00:00

Kill of some old defines and macros that we no longer use like
CPM_MAP_ADDR and CPM_IRQ_OFFSET.

Signed-off-by: Kumar Gala

powerpc/cpm2: fix building fs_enet driver as a module.

2009-03-19T09:00:01+00:00

Building the fs_enet driver as a modules fails because it cannot
access the global cpm2_immr symbol.

Signed-off-by: Grant Likely 
Signed-off-by: Kumar Gala

cpm2: Round the baud-rate clock divider to the nearest integer.

2009-01-29T00:16:57+00:00

Instead of rounding the divider down, improve the baud-rate generators
accuracy by rounding to the nearest integer.

Signed-off-by: Laurent Pinchart 
Signed-off-by: Kumar Gala

cpm2: Rework baud rate generators configuration to support external clocks.

2008-07-28T13:47:45+00:00

The CPM2 BRG setup functions cpm_setbrg and cpm2_fastbrg don't support
external clocks. This patch adds a new exported __cpm2_setbrg function
that takes the clock rate and clock source as extra parameters, and moves
cpm_setbrg and cpm2_fastbrg to include/asm-powerpc/cpm2.h where they
become inline wrappers around __cpm2_setbrg.

Signed-off-by: Laurent Pinchart 
Signed-off-by: Kumar Gala

cpm2: Implement GPIO LIB API on CPM2 Freescale SoC.

2008-07-28T12:40:48+00:00

This patch implement GPIO LIB support for the CPM2 GPIOs. The code can
also be used for CPM1 GPIO port E, as both cores are compatible at the
register level.

Based on earlier work by Laurent Pinchart.

Signed-off-by: Jochen Friedrich 
Cc: Laurent Pinchart 
Signed-off-by: Kumar Gala

[POWERPC] CPM: Always use new binding.

2008-04-17T06:01:40+00:00

The kconfig entry can go away once arch/ppc and references to the config in
drivers are removed.

Signed-off-by: Scott Wood 
Signed-off-by: Kumar Gala

[POWERPC] CPM2: Reset the CPM when early debugging is not enabled.

2008-04-17T06:01:37+00:00

Similarly to what is done for PQ1-based platforms, this patch resets the
PQ2 Communication Processor Module in cpm2_reset() when early debugging is
not enabled. This helps avoiding conflicts when the boot loader configured
the CPM in an unexpected way.

Signed-off-by: Laurent Pinchart 
Acked-by: Scott Wood 
Signed-off-by: Kumar Gala

Merge branch 'linux-2.6'

2008-04-14T11:11:02+00:00

[POWERPC] Fix CPM2 SCC1 clock initialization.

2008-04-03T06:31:59+00:00

A missing break statement in a switch caused cpm2_clk_setup() to initialize
SCC2 instead of SCC1.

Signed-off-by: Laurent Pinchart 
Signed-off-by: Kumar Gala