linux-toradex.git/arch/powerpc/sysdev/fsl_lbc.c, branch v3.1 Linux kernel for Apalis and Colibri modules powerpc/85xx: fix race bug of calling request_irq after enable elbc interrupts 2011-06-03T05:09:09+00:00 Shaohui Xie Shaohui.Xie@freescale.com 2011-06-03T02:45:11+00:00 704102a6799ecf7c1b268a43452761dae335f29c Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
powerpc/fsl_lbc: Add workaround for ELBC-A001 erratum 2011-05-20T13:46:49+00:00 Shengzhou Liu Shengzhou.Liu@freescale.com 2011-05-19T10:48:01+00:00 d08e44570ed611c527a1062eb4f8c6ac61832e6e Simultaneous FCM and GPCM or UPM operation may erroneously trigger bus monitor timeout. Set the local bus monitor timeout value to the maximum by setting LBCR[BMT] = 0 and LBCR[BMTPS] = 0xF. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 
Simultaneous FCM and GPCM or UPM operation may erroneously trigger
bus monitor timeout.

Set the local bus monitor timeout value to the maximum by setting
LBCR[BMT] = 0 and LBCR[BMTPS] = 0xF.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
P4080/mtd: Fix the freescale lbc issue with 36bit mode 2010-10-25T14:41:04+00:00 Lan Chunhe-B25806 b25806@freescale.com 2010-10-18T07:22:32+00:00 0b824d2b10eacd496c608a7c41a046862d48563b When system uses 36bit physical address, res.start is 36bit physical address. But the function of in_be32 returns 32bit physical address. Then both of them compared each other is wrong. So by converting the address of res.start into the right format fixes this issue. Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> 
When system uses 36bit physical address, res.start is 36bit
physical address. But the function of in_be32 returns 32bit
physical address. Then both of them compared each other is
wrong. So by converting the address of res.start into
the right format fixes this issue.

Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
P4080/eLBC: Make Freescale elbc interrupt common to elbc devices 2010-10-25T14:40:54+00:00 Roy Zang tie-fei.zang@freescale.com 2010-10-18T07:22:31+00:00 3ab8f2a2e7011c5e83363b42950757e46ef06824 Move Freescale elbc interrupt from nand driver to elbc driver. Then all elbc devices can use the interrupt instead of ONLY nand. For former nand driver, it had the two functions: 1. detecting nand flash partitions; 2. registering elbc interrupt. Now, second function is removed to fsl_lbc.c. Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Wood Scott-B07421 <B07421@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> 
Move Freescale elbc interrupt from nand driver to elbc driver.
Then all elbc devices can use the interrupt instead of ONLY nand.

For former nand driver, it had the two functions:

1. detecting nand flash partitions;
2. registering elbc interrupt.

Now, second function is removed to fsl_lbc.c.

Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Wood Scott-B07421 <B07421@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
[MTD] [NAND] FSL-UPM: add multi chip support 2009-04-06T14:17:09+00:00 Wolfgang Grandegger wg@grandegger.com 2009-03-30T10:02:42+00:00 b6e0e8c07754c8aefd6ff3536463fed5f71405a0 This patch adds support for multi-chip NAND devices to the FSL-UPM driver. This requires support for multiple GPIOs for the RNB pins. The NAND chips are selected through address lines defined by the FDT property "fsl,upm-addr-line-cs-offsets". Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> 
This patch adds support for multi-chip NAND devices to the FSL-UPM
driver. This requires support for multiple GPIOs for the RNB pins.
The NAND chips are selected through address lines defined by the
FDT property "fsl,upm-addr-line-cs-offsets".

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
powerpc: fix fsl_upm nand driver modular build 2008-10-13T16:48:24+00:00 Anton Vorontsov avorontsov@ru.mvista.com 2008-10-09T00:32:59+00:00 c0da99d5f7b0349cb11f970b3283c0d57beb5ec9 The fsl_upm nand driver fails to build because fsl_lbc_lock isn't exported, the lock is needed by the inlined fsl_upm_run_pattern() function: ERROR: "fsl_lbc_lock" [drivers/mtd/nand/fsl_upm.ko] undefined! Dave Jones purposed to export the lock, but it is better to just uninline the fsl_upm_run_pattern(). When uninlined we also no longer need the exported fsl_lbc_regs, and both fsl_lbc_lock and fsl_lbc_regs could be marked static. While at it, also add some missing includes that we should have included explicitly. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 
The fsl_upm nand driver fails to build because fsl_lbc_lock isn't
exported, the lock is needed by the inlined fsl_upm_run_pattern()
function:

ERROR: "fsl_lbc_lock" [drivers/mtd/nand/fsl_upm.ko] undefined!

Dave Jones purposed to export the lock, but it is better to just uninline
the fsl_upm_run_pattern().

When uninlined we also no longer need the exported fsl_lbc_regs, and
both fsl_lbc_lock and fsl_lbc_regs could be marked static.

While at it, also add some missing includes that we should have included
explicitly.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
[POWERPC] fsl_lbc: implement few UPM routines 2008-04-17T06:01:38+00:00 Anton Vorontsov avorontsov@ru.mvista.com 2008-04-11T17:03:40+00:00 acaa7aa30a8cdf7276945629f56d6daf30beb157 Freescale UPM can be used to adjust localbus timings or to generate orbitrary, pre-programmed "patterns" on the external Localbus signals. This patch implements few routines so drivers could work with UPMs in safe and generic manner. So far there is just one user of these routines: Freescale UPM NAND driver. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 
Freescale UPM can be used to adjust localbus timings or to generate
orbitrary, pre-programmed "patterns" on the external Localbus signals.
This patch implements few routines so drivers could work with UPMs in
safe and generic manner.

So far there is just one user of these routines: Freescale UPM NAND
driver.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>