linux-toradex.git/arch/powerpc/sysdev/fsl_lbc.c, branch v3.3.5

powerpc/85xx: Add lbc suspend support for PM

2011-11-24T08:01:40+00:00

Power supply for LBC registers is off when system go to deep-sleep state.
We save the values of registers before suspend and restore to registers
after resume.

We removed the last two reservation arrays from struct fsl_lbc_regs for
allocating less memory and minimizing the memcpy size.

Signed-off-by: Jiang Yutang 
Signed-off-by: Jia Hongtao 
Signed-off-by: Li Yang 
Signed-off-by: Kumar Gala

powerpc/fsl-lbc: Fix for fsl_upm

2011-11-24T08:00:42+00:00

If Freescale LBC driver fails to initialise itself from device tree, then
internal structure is freed only but not NULL-fied.  As result functions
fsl_lbc_find() after checking the structure is not NULL are trying to
access device registers.

Signed-off-by: Alexandre Rusev 
Signed-off-by: Kumar Gala

powerpc: various straight conversions from module.h --> export.h

2011-10-31T23:30:44+00:00

All these files were including module.h just for the basic
EXPORT_SYMBOL infrastructure.  We can shift them off to the
export.h header which is a way smaller footprint and thus
realize some compile time gains.

Signed-off-by: Paul Gortmaker

powerpc: Fix up implicit sched.h users

2011-10-31T23:30:40+00:00

They are getting it through device.h --> module.h path, but we want
to clean that up.  This is a sample of what will happen if we don't:

  pseries/iommu.c: In function 'tce_build_pSeriesLP':
  pseries/iommu.c:136: error: implicit declaration of function 'show_stack'

  pseries/eeh.c: In function 'eeh_token_to_phys':
  pseries/eeh.c:359: error: 'init_mm' undeclared (first use in this function)

  pseries/eeh_event.c: In function 'eeh_event_handler':
  pseries/eeh_event.c:63: error: implicit declaration of function 'daemonize'
  pseries/eeh_event.c:64: error: implicit declaration of function 'set_current_state'
  pseries/eeh_event.c:64: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function)
  pseries/eeh_event.c:64: error: (Each undeclared identifier is reported only once
  pseries/eeh_event.c:64: error: for each function it appears in.)
  pseries/eeh_event.c: In function 'eeh_thread_launcher':
  pseries/eeh_event.c:109: error: 'CLONE_KERNEL' undeclared (first use in this function)

  hotplug-cpu.c: In function 'pseries_mach_cpu_die':
  hotplug-cpu.c:115: error: implicit declaration of function 'idle_task_exit'

  kernel/swsusp_64.c: In function 'do_after_copyback':
  kernel/swsusp_64.c:17: error: implicit declaration of function 'touch_softlockup_watchdog'

  cell/spufs/context.c: In function 'alloc_spu_context':
  cell/spufs/context.c:60: error: implicit declaration of function 'get_task_mm'
  cell/spufs/context.c:60: warning: assignment makes pointer from integer without a cast
  cell/spufs/context.c: In function 'spu_forget':
  cell/spufs/context.c:127: error: implicit declaration of function 'mmput'

  pasemi/dma_lib.c: In function 'pasemi_dma_stop_chan':
  pasemi/dma_lib.c:332: error: implicit declaration of function 'cond_resched'

  sysdev/fsl_lbc.c: In function 'fsl_lbc_ctrl_irq':
  sysdev/fsl_lbc.c:247: error: 'TASK_NORMAL' undeclared (first use in this function)

Add in sched.h so these get the definitions they are looking for.

Signed-off-by: Paul Gortmaker

powerpc/85xx: fix race bug of calling request_irq after enable elbc interrupts

2011-06-03T05:09:09+00:00

Signed-off-by: Shaohui Xie 
Signed-off-by: Kumar Gala

powerpc/fsl_lbc: Add workaround for ELBC-A001 erratum

2011-05-20T13:46:49+00:00

Simultaneous FCM and GPCM or UPM operation may erroneously trigger
bus monitor timeout.

Set the local bus monitor timeout value to the maximum by setting
LBCR[BMT] = 0 and LBCR[BMTPS] = 0xF.

Signed-off-by: Shengzhou Liu 
Signed-off-by: Kumar Gala

P4080/mtd: Fix the freescale lbc issue with 36bit mode

2010-10-25T14:41:04+00:00

When system uses 36bit physical address, res.start is 36bit
physical address. But the function of in_be32 returns 32bit
physical address. Then both of them compared each other is
wrong. So by converting the address of res.start into
the right format fixes this issue.

Signed-off-by: Lan Chunhe-B25806 
Signed-off-by: Roy Zang 
Reviewed-by: Anton Vorontsov 
Signed-off-by: David Woodhouse

P4080/eLBC: Make Freescale elbc interrupt common to elbc devices

2010-10-25T14:40:54+00:00

Move Freescale elbc interrupt from nand driver to elbc driver.
Then all elbc devices can use the interrupt instead of ONLY nand.

For former nand driver, it had the two functions:

1. detecting nand flash partitions;
2. registering elbc interrupt.

Now, second function is removed to fsl_lbc.c.

Signed-off-by: Lan Chunhe-B25806 
Signed-off-by: Roy Zang 
Reviewed-by: Anton Vorontsov 
Cc: Wood Scott-B07421 
Signed-off-by: David Woodhouse

[MTD] [NAND] FSL-UPM: add multi chip support

2009-04-06T14:17:09+00:00

This patch adds support for multi-chip NAND devices to the FSL-UPM
driver. This requires support for multiple GPIOs for the RNB pins.
The NAND chips are selected through address lines defined by the
FDT property "fsl,upm-addr-line-cs-offsets".

Signed-off-by: Wolfgang Grandegger 
Acked-by: Anton Vorontsov 
Signed-off-by: David Woodhouse

powerpc: fix fsl_upm nand driver modular build

2008-10-13T16:48:24+00:00

The fsl_upm nand driver fails to build because fsl_lbc_lock isn't
exported, the lock is needed by the inlined fsl_upm_run_pattern()
function:

ERROR: "fsl_lbc_lock" [drivers/mtd/nand/fsl_upm.ko] undefined!

Dave Jones purposed to export the lock, but it is better to just uninline
the fsl_upm_run_pattern().

When uninlined we also no longer need the exported fsl_lbc_regs, and
both fsl_lbc_lock and fsl_lbc_regs could be marked static.

While at it, also add some missing includes that we should have included
explicitly.

Reported-by: Dave Jones 
Signed-off-by: Anton Vorontsov 
Signed-off-by: Kumar Gala