linux-toradex.git/arch/powerpc/sysdev/mpic.c, branch v3.4.73

powerpc/mpic: Properly set default triggers

2012-04-23T01:04:30+00:00

This gets rid of the unused default senses array, and replaces the
incorrect use of IRQ_TYPE_NONE with the new IRQ_TYPE_DEFAULT for
the initial set_trigger() call when mapping an interrupt.

This in turn makes us read the HW state and update the irq desc
accordingly.

Signed-off-by: Benjamin Herrenschmidt

powerpc/mpic: Fix confusion between hw_irq and virq

2012-04-23T01:04:29+00:00

mpic_is_ipi() takes a virq and immediately converts it to a hw_irq.

However, one of the two call sites calls it with a ... hw_irq. The
other call site also happens to have the hw_irq at hand, so let's
change it to just take that as an argument. Also change mpic_is_tm()
for consistency.

Signed-off-by: Benjamin Herrenschmidt

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2012-03-22T01:55:10+00:00

Pull powerpc merge from Benjamin Herrenschmidt:
 "Here's the powerpc batch for this merge window.  It is going to be a
  bit more nasty than usual as in touching things outside of
  arch/powerpc mostly due to the big iSeriesectomy :-) We finally got
  rid of the bugger (legacy iSeries support) which was a PITA to
  maintain and that nobody really used anymore.

  Here are some of the highlights:

   - Legacy iSeries is gone.  Thanks Stephen ! There's still some bits
     and pieces remaining if you do a grep -ir series arch/powerpc but
     they are harmless and will be removed in the next few weeks
     hopefully.

   - The 'fadump' functionality (Firmware Assisted Dump) replaces the
     previous (equivalent) "pHyp assisted dump"...  it's a rewrite of a
     mechanism to get the hypervisor to do crash dumps on pSeries, the
     new implementation hopefully being much more reliable.  Thanks
     Mahesh Salgaonkar.

   - The "EEH" code (pSeries PCI error handling & recovery) got a big
     spring cleaning, motivated by the need to be able to implement a
     new backend for it on top of some new different type of firwmare.

     The work isn't complete yet, but a good chunk of the cleanups is
     there.  Note that this adds a field to struct device_node which is
     not very nice and which Grant objects to.  I will have a patch soon
     that moves that to a powerpc private data structure (hopefully
     before rc1) and we'll improve things further later on (hopefully
     getting rid of the need for that pointer completely).  Thanks Gavin
     Shan.

   - I dug into our exception & interrupt handling code to improve the
     way we do lazy interrupt handling (and make it work properly with
     "edge" triggered interrupt sources), and while at it found & fixed
     a wagon of issues in those areas, including adding support for page
     fault retry & fatal signals on page faults.

   - Your usual random batch of small fixes & updates, including a bunch
     of new embedded boards, both Freescale and APM based ones, etc..."

I fixed up some conflicts with the generalized irq-domain changes from
Grant Likely, hopefully correctly.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits)
  powerpc/ps3: Do not adjust the wrapper load address
  powerpc: Remove the rest of the legacy iSeries include files
  powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces
  init: Remove CONFIG_PPC_ISERIES
  powerpc: Remove FW_FEATURE ISERIES from arch code
  tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
  powerpc/spufs: Fix double unlocks
  powerpc/5200: convert mpc5200 to use of_platform_populate()
  powerpc/mpc5200: add options to mpc5200_defconfig
  powerpc/mpc52xx: add a4m072 board support
  powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
  Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup
  powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board
  powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
  MAINTAINERS: Update PowerPC 4xx tree
  powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board
  powerpc: document the FSL MPIC message register binding
  powerpc: add support for MPIC message register API
  powerpc/fsl: Added aliased MSIIR register address to MSI node in dts
  powerpc/85xx: mpc8548cds - add 36-bit dts
  ...

powerpc/mpic: Fix allocation of reverse-map for multi-ISU mpics

2012-02-27T00:33:58+00:00

When using a multi-ISU MPIC, we can interrupts up to
isu_size * MPIC_MAX_ISU, not just isu_size, so allocate
the right size reverse map.

Without this, the code will constantly fallback to
a linear search.

Signed-off-by: Benjamin Herrenschmidt

powerpc/mpic: Remove duplicate MPIC_WANTS_RESET flag

2012-02-22T23:50:00+00:00

There are two separate flags controlling whether or not the MPIC is
reset during initialization, which is completely unnecessary, and only
one of them can be specified in the device tree.

Also, most platforms in-tree right now do actually want to reset the
MPIC during initialization anyways, which means lots of duplicate code
passing the MPIC_WANTS_RESET flag.

Fix all of the callers which currently do not pass the MPIC_WANTS_RESET
flag to pass the MPIC_NO_RESET flag, then remove the MPIC_WANTS_RESET
flag and make the code reset the MPIC by default.

Signed-off-by: Kyle Moffett 
Signed-off-by: Benjamin Herrenschmidt

powerpc/mpic: Add "last-interrupt-source" property to override hardware

2012-02-22T23:50:00+00:00

The FreeScale PowerQUICC-III-compatible (mpc85xx/mpc86xx) MPICs do not
correctly report the number of hardware interrupt sources, so software
needs to override the detected value with "256".

To avoid needing to write custom board-specific code to detect that
scenario, allow it to be easily overridden in the device-tree.

Signed-off-by: Kyle Moffett 
Signed-off-by: Benjamin Herrenschmidt

powerpc/mpic: Remove MPIC_BROKEN_FRR_NIRQS and duplicate irq_count

2012-02-22T23:49:59+00:00

The mpic->irq_count variable is only used as a software error-checking
limit to determine whether or not an IRQ number is valid.  In board code
which does not manually specify an IRQ count to mpic_alloc(), i.e. 0, it
is automatically detected from the number of ISUs and the ISU size.

In practice, all hardware ends up with irq_count == num_sources, so all
of the runtime checks on mpic->irq_count should just check the value of
mpic->num_sources instead.

When platform hardware does not correctly report the number of IRQs,
which only happens on the MPC85xx/MPC86xx, the MPIC_BROKEN_FRR_NIRQS
flag is used to override the detected value of num_sources with the
manual irq_count parameter.  Since there's no need to manually specify
the number of IRQs except in this case, the extra flag can be eliminated
and the test changed to "irq_count != 0".

Signed-off-by: Kyle Moffett 
Signed-off-by: Benjamin Herrenschmidt

fsl/mpic: Create and document the "single-cpu-affinity" device-tree flag

2012-02-22T23:49:59+00:00

The Freescale MPIC (and perhaps others in the future) is incapable of
routing non-IPI interrupts to more than once CPU at a time.  Currently
all of the Freescale boards msut pass the MPIC_SINGLE_DEST_CPU flag to
mpic_alloc(), but that information should really be present in the
device-tree.

Older board code can't rely on the device-tree having the property set,
but newer platforms won't need it manually specified in the code.

[BenH: Remove unrelated changes, folded in a different patch]

Signed-off-by: Kyle Moffett 
Signed-off-by: Benjamin Herrenschmidt

powerpc/mpic: Fix use of "flags" variable in mpic_alloc()

2012-02-22T23:49:58+00:00

The mpic_alloc() function takes a "flags" parameter and assigns it into
the mpic->flags variable fairly early on, but several later pieces of
code detect various device-tree properties and save them into the
"mpic->flags" variable (EG: "big-endian" => MPIC_BIG_ENDIAN).

Unfortunately, a number of codepaths (including several which test the
flag MPIC_BIG_ENDIAN!) test "flags" instead of "mpic->flags", and get
wrong answers as a result.

Consolidate the device-tree flag tests early in mpic_alloc() and change
all of the checks after "mpic->flags" is init'ed to use "mpic->flags".

[BenH: Fixed up use of mpic->node before it's initialized]

Signed-off-by: Kyle Moffett 
Signed-off-by: Benjamin Herrenschmidt

irq_domain: Replace irq_alloc_host() with revmap-specific initializers

2012-02-16T13:11:22+00:00

Each revmap type has different arguments for setting up the revmap.
This patch splits up the generator functions so that each revmap type
can do its own setup and the user doesn't need to keep track of how
each revmap type handles the arguments.

This patch also adds a host_data argument to the generators.  There are
cases where the host_data pointer will be needed before the function returns.
ie. the legacy map calls the .map callback for each irq before returning.

v2: - Add void *host_data argument to irq_domain_add_*() functions
    - fixed failure to compile
    - Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c

Signed-off-by: Grant Likely 
Cc: Rob Herring 
Cc: Benjamin Herrenschmidt 
Cc: Thomas Gleixner 
Cc: Milton Miller 
Tested-by: Olof Johansson