linux-toradex.git/arch/powerpc/sysdev/mv64x60_dev.c, branch v3.5-rc2

powerpc/mv64x60: Suspected typo in assignment

2011-03-02T05:50:05+00:00

Untested, but looks like an obvious typo to me.

[BenH: No feedback, but it's obviously wrong]

Signed-off-by: Nicolas Kaiser 
Signed-off-by: Benjamin Herrenschmidt

of/net: Move of_get_mac_address() to a common source file.

2010-11-01T05:08:14+00:00

There are two identical implementations of of_get_mac_address(), one
each in arch/powerpc/kernel/prom_parse.c and
arch/microblaze/kernel/prom_parse.c.  Move this function to a new
common file of_net.{c,h} and adjust all the callers to include the new
header.

Signed-off-by: David Daney 
[grant.likely@secretlab.ca: protect header with #ifdef]
Signed-off-by: Grant Likely

of: Merge of_platform_bus_type with platform_bus_type

2010-07-24T15:57:51+00:00

of_platform_bus was being used in the same manner as the platform_bus.
The only difference being that of_platform_bus devices are generated
from data in the device tree, and platform_bus devices are usually
statically allocated in platform code.  Having them separate causes
the problem of device drivers having to be registered twice if it
was possible for the same device to appear on either bus.

This patch removes of_platform_bus_type and registers all of_platform
bus devices and drivers on the platform bus instead.  A previous patch
made the of_device structure an alias for the platform_device structure,
and a shim is used to adapt of_platform_drivers to the platform bus.

After all of of_platform_bus drivers are converted to be normal platform
drivers, the shim code can be removed.

Signed-off-by: Grant Likely 
Acked-by: David S. Miller

powerpc: Add coherent_dma_mask to mv64x60 devices

2010-02-17T03:02:47+00:00

DMA ops requires that coherent_dma_mask be set properly for a device,
but this was not being done for devices on the MV64x60 that use DMA.
Both the serial and ethernet devices need this or they won't be able
to allocate memory.

Signed-off-by: Corey Minyard 
Signed-off-by: Benjamin Herrenschmidt

mv643xx_eth: remove force_phy_addr field

2008-09-05T04:33:59+00:00

Currently, there are two different fields in the
mv643xx_eth_platform_data struct that together describe the PHY
address -- one field (phy_addr) has the address of the PHY, but if
that address is zero, a second field (force_phy_addr) needs to be
set to distinguish the actual address zero from a zero due to not
having filled in the PHY address explicitly (which should mean
'use the default PHY address').

If we are a bit smarter about the encoding of the phy_addr field,
we can avoid the need for a second field -- this patch does that.

Signed-off-by: Lennert Buytenhek

[POWERPC] Create of_buses for MV64x60 devices

2008-05-14T12:31:41+00:00

For each mv64360 entry in the OpenFirmware database, add the
registration of an of_bus to take care of devices connected to
the MV64x60 asynchronous devices controller.
This change makes it possible for those devices to be detected by
drivers that support the of_platform without having a custom call
for each of them in the board file.

Signed-off-by: Remi Machet 
Signed-off-by: Paul Mackerras

mv643xx_eth: get rid of static variables, allow multiple instances

2008-04-29T04:17:07+00:00

Move mv643xx_eth's static state (ethernet register block base address
and MII management interface spinlock) into a struct hanging off the
shared platform device.  This is necessary to support chips that
contain multiple mv643xx_eth silicon blocks.

Signed-off-by: Lennert Buytenhek 
Acked-by: Nicolas Pitre 
Signed-off-by: Dale Farnsworth

[POWERPC] Initialize all mv64x60 devices even if one fails

2008-04-24T10:57:34+00:00

If one of the devices of the mv64x60 init fails, the remaining
devices are not initialized.

This changes the code to display an error and continue the
initialization.

Signed-off-by: Remi Machet (rmachet@slac.stanford.edu)
Signed-off-by: Paul Mackerras

[POWERPC] Use default values if necessary in mv64x60 I2C initialization

2008-04-24T10:57:34+00:00

I2C parameters freq_m and freq_n are assigned defaults in the code,
but if properties for those parameters are not found in the open
firmware description the init routine returns an error and doesn't
create the platform device.

This changes the code so that it doesn't return an error if the
properties are not found but instead uses the default values.

Signed-off-by: Remi Machet (rmachet@slac.stanford.edu)
Acked-by: Dale Farnsworth 
Signed-off-by: Paul Mackerras

[POWERPC] mv643xx_eth: Prepare to support multiple silicon blocks

2008-04-15T11:21:24+00:00

The mv643xx_eth driver is being modified to support multiple instances
of the ethernet silicon block on the same platform.  Each block contains
a single register bank containing the registers for up to three ports
interleaved within that bank.  This patch updates the PowerPC OF to
platform_device glue code to support multiple silicon blocks, each
with up to three ethernet ports.  The main difference is that we now
allow multiple mv64x60_shared platform_devices to be registered and
we provide each port platform_device with a pointer to its associated
shared platform_device.  The pointer will not be used until the
mv643xx_eth driver changes are committed.

Signed-off-by: Dale Farnsworth 
Acked-by: Mark Greer 
Signed-off-by: Paul Mackerras