linux-toradex.git/arch/powerpc, branch v3.9.2 Linux kernel for Apalis and Colibri modules powerpc: fix numa distance for form0 device tree 2013-05-11T14:18:17+00:00 Vaidyanathan Srinivasan svaidy@linux.vnet.ibm.com 2013-03-22T05:49:35+00:00 f63a3b86960177bca59f29eb5c71e3c2fb3e91aa commit 7122beeee7bc1757682049780179d7c216dd1c83 upstream. The following commit breaks numa distance setup for old powerpc systems that use form0 encoding in device tree. commit 41eab6f88f24124df89e38067b3766b7bef06ddb powerpc/numa: Use form 1 affinity to setup node distance Device tree node /rtas/ibm,associativity-reference-points would index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or form1 encoding detected by ibm,architecture-vec-5 property. All modern systems use form1 and current kernel code is correct. However, on older systems with form0 encoding, the numa distance will get hard coded as LOCAL_DISTANCE for all nodes. This causes task scheduling anomaly since scheduler will skip building numa level domain (topmost domain with all cpus) if all numa distances are same. (value of 'level' in sched_init_numa() will remain 0) Prior to the above commit: ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE) Restoring compatible behavior with this patch for old powerpc systems with device tree where numa distance are encoded as form0. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7122beeee7bc1757682049780179d7c216dd1c83 upstream.

The following commit breaks numa distance setup for old powerpc
systems that use form0 encoding in device tree.

commit 41eab6f88f24124df89e38067b3766b7bef06ddb
powerpc/numa: Use form 1 affinity to setup node distance

Device tree node /rtas/ibm,associativity-reference-points would
index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or
form1 encoding detected by ibm,architecture-vec-5 property.

All modern systems use form1 and current kernel code is correct.
However, on older systems with form0 encoding, the numa distance
will get hard coded as LOCAL_DISTANCE for all nodes.  This causes
task scheduling anomaly since scheduler will skip building numa
level domain (topmost domain with all cpus) if all numa distances
are same.  (value of 'level' in sched_init_numa() will remain 0)

Prior to the above commit:
((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)

Restoring compatible behavior with this patch for old powerpc systems
with device tree where numa distance are encoded as form0.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/tm: Fix null pointer deference in flush_hash_page 2013-05-11T14:18:16+00:00 Michael Neuling mikey@neuling.org 2013-05-02T15:36:14+00:00 4a32fbd0b67057a94dbd173ed85114aa46e32dfb commit c2fd22df89365df9451d5b91da3b7bfd48122ecd upstream. Make sure that current->thread.reg exists before we deference it in flush_hash_page. Signed-off-by: Michael Neuling <mikey@neuling.org> Reported-by: John J Miller <millerjo@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c2fd22df89365df9451d5b91da3b7bfd48122ecd upstream.

Make sure that current->thread.reg exists before we deference it in
flush_hash_page.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Reported-by: John J Miller <millerjo@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc: Emulate non privileged DSCR read and write 2013-05-11T14:18:16+00:00 Anton Blanchard anton@samba.org 2013-05-01T20:06:33+00:00 5e701b123c0d3c58c01d3168de9ef11d86eea34d commit 73d2fb758e678c93bc76d40876c2359f0729b0ef upstream. POWER8 allows read and write of the DSCR in userspace. We added kernel emulation so applications could always use the instructions regardless of the CPU type. Unfortunately there are two SPRs for the DSCR and we only added emulation for the privileged one. Add code to match the non privileged one. A simple test was created to verify the fix: http://ozlabs.org/~anton/junkcode/user_dscr_test.c Without the patch we get a SIGILL and it passes with the patch. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 73d2fb758e678c93bc76d40876c2359f0729b0ef upstream.

POWER8 allows read and write of the DSCR in userspace. We added
kernel emulation so applications could always use the instructions
regardless of the CPU type.

Unfortunately there are two SPRs for the DSCR and we only added
emulation for the privileged one. Add code to match the non
privileged one.

A simple test was created to verify the fix:

http://ozlabs.org/~anton/junkcode/user_dscr_test.c

Without the patch we get a SIGILL and it passes with the patch.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/spufs: Initialise inode->i_ino in spufs_new_inode() 2013-05-08T03:33:03+00:00 Michael Ellerman michael@ellerman.id.au 2013-04-23T15:13:14+00:00 1a36af179e195ab85e1444cc760fd7a620289fa6 commit 6747e83235caecd30b186d1282e4eba7679f81b7 upstream. In commit 85fe402 (fs: do not assign default i_ino in new_inode), the initialisation of i_ino was removed from new_inode() and pushed down into the callers. However spufs_new_inode() was not updated. This exhibits as no files appearing in /spu, because all our dirents have a zero inode, which readdir() seems to dislike. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6747e83235caecd30b186d1282e4eba7679f81b7 upstream.

In commit 85fe402 (fs: do not assign default i_ino in new_inode), the
initialisation of i_ino was removed from new_inode() and pushed down
into the callers. However spufs_new_inode() was not updated.

This exhibits as no files appearing in /spu, because all our dirents
have a zero inode, which readdir() seems to dislike.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/power8: Fix secondary CPUs hanging on boot for HV=0 2013-05-08T03:33:03+00:00 Michael Neuling mikey@neuling.org 2013-04-24T21:00:37+00:00 9802546fdf7169e9270f9ddec7fdfae02d3f4e8c commit 8c2a381734fc9718f127f4aba958e8a7958d4028 upstream. In __restore_cpu_power8 we determine if we are HV and if not, we return before setting HV only resources. Unfortunately we forgot to restore the link register from r11 before returning. This will happen on boot and with secondary CPUs not coming online. This adds the missing link register restore. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8c2a381734fc9718f127f4aba958e8a7958d4028 upstream.

In __restore_cpu_power8 we determine if we are HV and if not, we return
before setting HV only resources.

Unfortunately we forgot to restore the link register from r11 before
returning.

This will happen on boot and with secondary CPUs not coming online.

This adds the missing link register restore.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc: Fix hardware IRQs with MMU on exceptions when HV=0 2013-05-08T03:33:03+00:00 Michael Neuling mikey@neuling.org 2013-04-25T15:30:57+00:00 644ae55abcdf6c1e7d729621bf5ce7942dffe77e commit 3e96ca7f007ddb06b82a74a68585d1dbafa85ff1 upstream. POWER8 allows us to take interrupts with the MMU on. This gives us a second set of vectors offset at 0x4000. Unfortunately when coping these vectors we missed checking for MSR HV for hardware interrupts (0x500). This results in us trying to use HSRR0/1 when HV=0, rather than SRR0/1 on HW IRQs The below fixes this to check CPU_FTR_HVMODE when patching the code at 0x4500. Also we remove the check for CPU_FTR_ARCH_206 since relocation on IRQs are only available in arch 2.07 and beyond. Thanks to benh for helping find this. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3e96ca7f007ddb06b82a74a68585d1dbafa85ff1 upstream.

POWER8 allows us to take interrupts with the MMU on.  This gives us a
second set of vectors offset at 0x4000.

Unfortunately when coping these vectors we missed checking for MSR HV
for hardware interrupts (0x500).  This results in us trying to use
HSRR0/1 when HV=0, rather than SRR0/1 on HW IRQs

The below fixes this to check CPU_FTR_HVMODE when patching the code at
0x4500.

Also we remove the check for CPU_FTR_ARCH_206 since relocation on IRQs
are only available in arch 2.07 and beyond.

Thanks to benh for helping find this.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc: Add isync to copy_and_flush 2013-05-08T03:33:03+00:00 Michael Neuling michael.neuling@au1.ibm.com 2013-04-24T00:30:09+00:00 efaa9d79ccb5491181ea100dc6a9c575f626ef5a commit 29ce3c5073057991217916abc25628e906911757 upstream. In __after_prom_start we copy the kernel down to zero in two calls to copy_and_flush. After the first call (copy from 0 to copy_to_here:) we jump to the newly copied code soon after. Unfortunately there's no isync between the copy of this code and the jump to it. Hence it's possible that stale instructions could still be in the icache or pipeline before we branch to it. We've seen this on real machines and it's results in no console output after: calling quiesce... returning from prom_init The below adds an isync to ensure that the copy and flushing has completed before any branching to the new instructions occurs. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 29ce3c5073057991217916abc25628e906911757 upstream.

In __after_prom_start we copy the kernel down to zero in two calls to
copy_and_flush.  After the first call (copy from 0 to copy_to_here:)
we jump to the newly copied code soon after.

Unfortunately there's no isync between the copy of this code and the
jump to it.  Hence it's possible that stale instructions could still be
in the icache or pipeline before we branch to it.

We've seen this on real machines and it's results in no console output
after:
  calling quiesce...
  returning from prom_init

The below adds an isync to ensure that the copy and flushing has
completed before any branching to the new instructions occurs.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm 2013-04-17T02:46:14+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-04-17T02:46:14+00:00 4be41343a2aba91e6e9709c446b824350e9a31ed Pull kvm fixes from Marcelo Tosatti: "PPC and ARM KVM fixes" * git://git.kernel.org/pub/scm/virt/kvm/kvm: ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write ARM: KVM: fix KVM_CAP_ARM_SET_DEVICE_ADDR reporting kvm/ppc/e500: eliminate tlb_refs kvm/ppc/e500: g2h_tlb1_map: clear old bit before setting new bit kvm/ppc/e500: h2g_tlb1_rmap: esel 0 is valid kvm/powerpc/e500mc: fix tlb invalidation on cpu migration 
Pull kvm fixes from Marcelo Tosatti:
 "PPC and ARM KVM fixes"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write
  ARM: KVM: fix KVM_CAP_ARM_SET_DEVICE_ADDR reporting
  kvm/ppc/e500: eliminate tlb_refs
  kvm/ppc/e500: g2h_tlb1_map: clear old bit before setting new bit
  kvm/ppc/e500: h2g_tlb1_rmap: esel 0 is valid
  kvm/powerpc/e500mc: fix tlb invalidation on cpu migration
powerpc: add a missing label in resume_kernel 2013-04-15T07:29:48+00:00 Kevin Hao haokexin@gmail.com 2013-04-09T22:31:24+00:00 d8b92292408831d86ff7b781e66bf79301934b99 A label 0 was missed in the patch a9c4e541 (powerpc/kprobe: Complete kprobe and migrate exception frame). This will cause the kernel branch to an undetermined address if there really has a conflict when updating the thread flags. Signed-off-by: Kevin Hao <haokexin@gmail.com> Cc: stable@vger.kernel.org Acked-By: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> 
A label 0 was missed in the patch a9c4e541 (powerpc/kprobe: Complete
kprobe and migrate exception frame). This will cause the kernel
branch to an undetermined address if there really has a conflict when
updating the thread flags.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Acked-By: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
powerpc: Fix audit crash due to save/restore PPR changes 2013-04-15T07:29:45+00:00 Alistair Popple alistair@popple.id.au 2013-04-15T01:44:14+00:00 05e38e5d5d437c762c79428ae8434632a8ca2c5e The current mainline crashes when hitting userspace with the following: kernel BUG at kernel/auditsc.c:1769! cpu 0x1: Vector: 700 (Program Check) at [c000000023883a60] pc: c0000000001047a8: .__audit_syscall_entry+0x38/0x130 lr: c00000000000ed64: .do_syscall_trace_enter+0xc4/0x270 sp: c000000023883ce0 msr: 8000000000029032 current = 0xc000000023800000 paca = 0xc00000000f080380 softe: 0 irq_happened: 0x01 pid = 1629, comm = start_udev kernel BUG at kernel/auditsc.c:1769! enter ? for help [c000000023883d80] c00000000000ed64 .do_syscall_trace_enter+0xc4/0x270 [c000000023883e30] c000000000009b08 syscall_dotrace+0xc/0x38 --- Exception: c00 (System Call) at 0000008010ec50dc Bisecting found the following patch caused it: commit 44e9309f1f357794b7ae93d5f3e3e6f11d2b8a7f Author: Haren Myneni <haren@linux.vnet.ibm.com> powerpc: Implement PPR save/restore It was found this patch corrupted r9 when calling SET_DEFAULT_THREAD_PPR() Using r10 as a scratch register instead of r9 solved the problem. Signed-off-by: Alistair Popple <alistair@popple.id.au> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> 
The current mainline crashes when hitting userspace with the following:

kernel BUG at kernel/auditsc.c:1769!
cpu 0x1: Vector: 700 (Program Check) at [c000000023883a60]
    pc: c0000000001047a8: .__audit_syscall_entry+0x38/0x130
    lr: c00000000000ed64: .do_syscall_trace_enter+0xc4/0x270
    sp: c000000023883ce0
   msr: 8000000000029032
  current = 0xc000000023800000
  paca    = 0xc00000000f080380   softe: 0        irq_happened: 0x01
    pid   = 1629, comm = start_udev
kernel BUG at kernel/auditsc.c:1769!
enter ? for help
[c000000023883d80] c00000000000ed64 .do_syscall_trace_enter+0xc4/0x270
[c000000023883e30] c000000000009b08 syscall_dotrace+0xc/0x38
 --- Exception: c00 (System Call) at 0000008010ec50dc

Bisecting found the following patch caused it:

commit 44e9309f1f357794b7ae93d5f3e3e6f11d2b8a7f
Author: Haren Myneni <haren@linux.vnet.ibm.com>
powerpc: Implement PPR save/restore

It was found this patch corrupted r9 when calling
SET_DEFAULT_THREAD_PPR()

Using r10 as a scratch register instead of r9 solved the problem.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>