linux-toradex.git/arch/powerpc, branch v4.3-rc2

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2015-09-18T16:23:08+00:00

Pull KVM fixes from Paolo Bonzini:
 "Mostly stable material, a lot of ARM fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
  sched: access local runqueue directly in single_task_running
  arm/arm64: KVM: Remove 'config KVM_ARM_MAX_VCPUS'
  arm64: KVM: Remove all traces of the ThumbEE registers
  arm: KVM: Disable virtual timer even if the guest is not using it
  arm64: KVM: Disable virtual timer even if the guest is not using it
  arm/arm64: KVM: vgic: Check for !irqchip_in_kernel() when mapping resources
  KVM: s390: Replace incorrect atomic_or with atomic_andnot
  arm: KVM: Fix incorrect device to IPA mapping
  arm64: KVM: Fix user access for debug registers
  KVM: vmx: fix VPID is 0000H in non-root operation
  KVM: add halt_attempted_poll to VCPU stats
  kvm: fix zero length mmio searching
  kvm: fix double free for fast mmio eventfd
  kvm: factor out core eventfd assign/deassign logic
  kvm: don't try to register to KVM_FAST_MMIO_BUS for non mmio eventfd
  KVM: make the declaration of functions within 80 characters
  KVM: arm64: add workaround for Cortex-A57 erratum #852523
  KVM: fix polling for guest halt continued even if disable it
  arm/arm64: KVM: Fix PSCI affinity info return value for non valid cores
  arm64: KVM: set {v,}TCR_EL2 RES1 bits
  ...

Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-09-18T15:11:42+00:00

Pull irq updates from Thomas Gleixner:
 "This is a rather large update post rc1 due to the final steps of
  cleanups and API changes which had to wait for the preparatory patches
  to hit your tree.

   - Regression fixes for ARM GIC irqchips

   - Regression fixes and lockdep anotations for renesas irq chips

   - The leftovers of the cleanup and preparatory patches which have
     been ignored by maintainers

   - Final conversions of the newly merged users of obsolete APIs

   - Final removal of obsolete APIs

   - Final removal of ARM artifacts which had been introduced during the
     conversion of ARM to the generic interrupt code.

   - Final split of the irq_data into chip specific and common data to
     reflect the needs of hierarchical irq domains.

   - Treewide removal of the first argument of interrupt flow handlers,
     i.e. the irq number, which is not used by the majority of handlers
     and simple to retrieve from the other argument the irq descriptor.

   - A few comment updates and build warning fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  arm64: Remove ununsed set_irq_flags
  ARM: Remove ununsed set_irq_flags
  sh: Kill off set_irq_flags usage
  irqchip: Kill off set_irq_flags usage
  gpu/drm: Kill off set_irq_flags usage
  genirq: Remove irq argument from irq flow handlers
  genirq: Move field 'msi_desc' from irq_data into irq_common_data
  genirq: Move field 'affinity' from irq_data into irq_common_data
  genirq: Move field 'handler_data' from irq_data into irq_common_data
  genirq: Move field 'node' from irq_data into irq_common_data
  irqchip/gic-v3: Use IRQD_FORWARDED_TO_VCPU flag
  irqchip/gic: Use IRQD_FORWARDED_TO_VCPU flag
  genirq: Provide IRQD_FORWARDED_TO_VCPU status flag
  genirq: Simplify irq_data_to_desc()
  genirq: Remove __irq_set_handler_locked()
  pinctrl/pistachio: Use irq_set_handler_locked
  gpio: vf610: Use irq_set_handler_locked
  powerpc/mpc8xx: Use irq_set_handler_locked()
  powerpc/ipic: Use irq_set_handler_locked()
  powerpc/cpm2: Use irq_set_handler_locked()
  ...

Merge tag 'powerpc-4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2015-09-18T15:01:06+00:00

Pull powerpc fixes from Michael Ellerman:

 - Fix 32-bit TCE table init in kdump kernel from Nish

 - Fix kdump with non-power-of-2 crashkernel= from Nish

 - Abort cxl_pci_enable_device_hook() if PCI channel is offline from
   Andrew

 - Fix to release DRC when configure_connector() fails from Bharata

 - Wire up sys_userfaultfd()

 - Fix race condition in tearing down MSI interrupts from Paul

 - Fix unbalanced pci_dev_get() in cxl_probe() from Daniel

 - Fix cxl build failure due to -Wunused-variable gcc behaviour change
   from Ian

 - Tell the toolchain to use ABI v2 when building an LE boot wrapper
   from Benh

 - Fix THP to recompute hash value after a failed update from Aneesh

 - 32-bit memcpy/memset: only use dcbz once cache is enabled from
   Christophe

* tag 'powerpc-4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc32: memset: only use dcbz once cache is enabled
  powerpc32: memcpy: only use dcbz once cache is enabled
  powerpc/mm: Recompute hash value after a failed update
  powerpc/boot: Specify ABI v2 when building an LE boot wrapper
  cxl: Fix build failure due to -Wunused-variable behaviour change
  cxl: Fix unbalanced pci_dev_get in cxl_probe
  powerpc/MSI: Fix race condition in tearing down MSI interrupts
  powerpc: Wire up sys_userfaultfd()
  powerpc/pseries: Release DRC when configure_connector fails
  cxl: abort cxl_pci_enable_device_hook() if PCI channel is offline
  powerpc/powernv/pci-ioda: fix kdump with non-power-of-2 crashkernel=
  powerpc/powernv/pci-ioda: fix 32-bit TCE table init in kdump kernel

powerpc32: memset: only use dcbz once cache is enabled

2015-09-17T00:36:53+00:00

memset() uses instruction dcbz to speed up clearing by not wasting time
loading cache line with data that will be overwritten.
Some platform like mpc52xx do no have cache active at startup and
can therefore not use memset(). Allthough no part of the code
explicitly uses memset(), GCC may make calls to it.

This patch modifies memset() such that at startup, memset()
unconditionally skip the optimised bloc that uses dcbz instruction.

Once the initial MMU is set up, in machine_init() we patch memset()
by replacing this inconditional jump by a NOP

Tested-by: Thomas Gleixner 
Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman

powerpc32: memcpy: only use dcbz once cache is enabled

2015-09-17T00:36:44+00:00

memcpy() uses instruction dcbz to speed up copy by not wasting time
loading cache line with data that will be overwritten.
Some platform like mpc52xx do no have cache active at startup and
can therefore not use memcpy(). Allthough no part of the code
explicitly uses memcpy(), GCC makes calls to it.

This patch modifies memcpy() such that at startup, memcpy()
unconditionally jumps to generic_memcpy() which doesn't use
the dcbz instruction.

Once the initial MMU is set up, in machine_init() we patch memcpy()
by replacing this inconditional jump by a NOP

Reported-by: Michal Sojka 
Tested-by: Thomas Gleixner 
Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman

genirq: Remove irq argument from irq flow handlers

2015-09-16T13:47:51+00:00

Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner 
Cc: Julia Lawall 
Cc: Jiang Liu

powerpc/mpc8xx: Use irq_set_handler_locked()

2015-09-16T13:43:11+00:00

Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle:

@@
struct irq_data *d;
expression E1;
@@

-__irq_set_handler_locked(d->irq, E1);
+irq_set_handler_locked(d, E1);

Signed-off-by: Thomas Gleixner 
Cc: Jiang Liu 
Cc: Julia Lawall 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: linuxppc-dev@lists.ozlabs.org

powerpc/ipic: Use irq_set_handler_locked()

2015-09-16T13:43:11+00:00

Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle:

@@
struct irq_data *d;
expression E1;
@@

-__irq_set_handler_locked(d->irq, E1);
+irq_set_handler_locked(d, E1);

Signed-off-by: Thomas Gleixner 
Cc: Jiang Liu 
Cc: Julia Lawall 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: Anton Blanchard 
Cc: linuxppc-dev@lists.ozlabs.org

powerpc/cpm2: Use irq_set_handler_locked()

2015-09-16T13:43:10+00:00

Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle:

@@
struct irq_data *d;
expression E1;
@@

-__irq_set_handler_locked(d->irq, E1);
+irq_set_handler_locked(d, E1);

Signed-off-by: Thomas Gleixner 
Cc: Jiang Liu 
Cc: Julia Lawall 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: linuxppc-dev@lists.ozlabs.org

powerpc/mpc52xx: Use irq_set_handler_locked()

2015-09-16T13:43:10+00:00

Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle:

@@
struct irq_data *d;
expression E1;
@@

-__irq_set_handler_locked(d->irq, E1);
+irq_set_handler_locked(d, E1);

Signed-off-by: Thomas Gleixner 
Cc: Jiang Liu 
Cc: Julia Lawall 
Cc: Anatolij Gustschin 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: linuxppc-dev@lists.ozlabs.org