linux-toradex.git/arch/powerpc, branch v4.9.100

KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entry

2018-05-16T08:08:42+00:00

commit a8b48a4dccea77e29462e59f1dbf0d5aa1ff167c upstream.

This fixes a bug where the trap number that is returned by
__kvmppc_vcore_entry gets corrupted.  The effect of the corruption
is that IPIs get ignored on POWER9 systems when the IPI is sent via
a doorbell interrupt to a CPU which is executing in a KVM guest.
The effect of the IPI being ignored is often that another CPU locks
up inside smp_call_function_many() (and if that CPU is holding a
spinlock, other CPUs then lock up inside raw_spin_lock()).

The trap number is currently held in register r12 for most of the
assembly-language part of the guest exit path.  In that path, we
call kvmppc_subcore_exit_guest(), which is a C function, without
restoring r12 afterwards.  Depending on the kernel config and the
compiler, it may modify r12 or it may not, so some config/compiler
combinations see the bug and others don't.

To fix this, we arrange for the trap number to be stored on the
stack from the 'guest_bypass:' label until the end of the function,
then the trap number is loaded and returned in r12 as before.

Cc: stable@vger.kernel.org # v4.8+
Fixes: fd7bacbca47a ("KVM: PPC: Book3S HV: Fix TB corruption in guest exit path on HMI interrupt")
Signed-off-by: Paul Mackerras 
Signed-off-by: Greg Kroah-Hartman

powerpc/eeh: Fix race with driver un/bind

2018-05-01T22:13:10+00:00

commit f0295e047fcf52ccb42561fb7de6942f5201b676 upstream.

The current EEH callbacks can race with a driver unbind. This can
result in a backtraces like this:

  EEH: Frozen PHB#0-PE#1fc detected
  EEH: PE location: S000009, PHB location: N/A
  CPU: 2 PID: 2312 Comm: kworker/u258:3 Not tainted 4.15.6-openpower1 #2
  Workqueue: nvme-wq nvme_reset_work [nvme]
  Call Trace:
    dump_stack+0x9c/0xd0 (unreliable)
    eeh_dev_check_failure+0x420/0x470
    eeh_check_failure+0xa0/0xa4
    nvme_reset_work+0x138/0x1414 [nvme]
    process_one_work+0x1ec/0x328
    worker_thread+0x2e4/0x3a8
    kthread+0x14c/0x154
    ret_from_kernel_thread+0x5c/0xc8
  nvme nvme1: Removing after probe failure status: -19
  
  cpu 0x23: Vector: 300 (Data Access) at [c000000ff50f3800]
      pc: c0080000089a0eb0: nvme_error_detected+0x4c/0x90 [nvme]
      lr: c000000000026564: eeh_report_error+0xe0/0x110
      sp: c000000ff50f3a80
     msr: 9000000000009033
     dar: 400
   dsisr: 40000000
    current = 0xc000000ff507c000
    paca    = 0xc00000000fdc9d80   softe: 0        irq_happened: 0x01
      pid   = 782, comm = eehd
  Linux version 4.15.6-openpower1 (smc@smc-desktop) (gcc version 6.4.0 (Buildroot 2017.11.2-00008-g4b6188e)) #2 SM                                             P Tue Feb 27 12:33:27 PST 2018
  enter ? for help
    eeh_report_error+0xe0/0x110
    eeh_pe_dev_traverse+0xc0/0xdc
    eeh_handle_normal_event+0x184/0x4c4
    eeh_handle_event+0x30/0x288
    eeh_event_handler+0x124/0x170
    kthread+0x14c/0x154
    ret_from_kernel_thread+0x5c/0xc8

The first part is an EEH (on boot), the second half is the resulting
crash. nvme probe starts the nvme_reset_work() worker thread. This
worker thread starts touching the device which see a device error
(EEH) and hence queues up an event in the powerpc EEH worker
thread. nvme_reset_work() then continues and runs
nvme_remove_dead_ctrl_work() which results in unbinding the driver
from the device and hence releases all resources. At the same time,
the EEH worker thread starts doing the EEH .error_detected() driver
callback, which no longer works since the resources have been freed.

This fixes the problem in the same way the generic PCIe AER code (in
drivers/pci/pcie/aer/aerdrv_core.c) does. It makes the EEH code hold
the device_lock() while performing the driver EEH callbacks and
associated code. This ensures either the callbacks are no longer
register, or if they are registered the driver will not be removed
from underneath us.

This has been broken forever. The EEH call backs were first introduced
in 2005 (in 77bd7415610) but it's not clear if a lock was needed back
then.

Fixes: 77bd74156101 ("[PATCH] powerpc: PCI Error Recovery: PPC64 core recovery routines")
Cc: stable@vger.kernel.org # v2.6.16+
Signed-off-by: Michael Neuling 
Reviewed-by: Benjamin Herrenschmidt 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops

2018-05-01T22:13:09+00:00

commit 682e6b4da5cbe8e9a53f979a58c2a9d7dc997175 upstream.

The OPAL RTC driver does not sleep in case it gets OPAL_BUSY or
OPAL_BUSY_EVENT from firmware, which causes large scheduling
latencies, up to 50 seconds have been observed here when RTC stops
responding (BMC reboot can do it).

Fix this by converting it to the standard form OPAL_BUSY loop that
sleeps.

Fixes: 628daa8d5abf ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Nicholas Piggin 
Acked-by: Alexandre Belloni 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

powerpc/lib: Fix off-by-one in alternate feature patching

2018-04-24T07:34:17+00:00

commit b8858581febb050688e276b956796bc4a78299ed upstream.

When we patch an alternate feature section, we have to adjust any
relative branches that branch out of the alternate section.

But currently we have a bug if we have a branch that points to past
the last instruction of the alternate section, eg:

  FTR_SECTION_ELSE
  1:     b       2f
         or      6,6,6
  2:
  ALT_FTR_SECTION_END(...)
         nop

This will result in a relative branch at 1 with a target that equals
the end of the alternate section.

That branch does not need adjusting when it's moved to the non-else
location. Currently we do adjust it, resulting in a branch that goes
off into the link-time location of the else section, which is junk.

The fix is to not patch branches that have a target == end of the
alternate section.

Fixes: d20fe50a7b3c ("KVM: PPC: Book3S HV: Branch inside feature section")
Fixes: 9b1a735de64c ("powerpc: Add logic to patch alternative feature sections")
Cc: stable@vger.kernel.org # v2.6.27+
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

powerpc/eeh: Fix enabling bridge MMIO windows

2018-04-24T07:34:17+00:00

commit 13a83eac373c49c0a081cbcd137e79210fe78acd upstream.

On boot we save the configuration space of PCIe bridges. We do this so
when we get an EEH event and everything gets reset that we can restore
them.

Unfortunately we save this state before we've enabled the MMIO space
on the bridges. Hence if we have to reset the bridge when we come back
MMIO is not enabled and we end up taking an PE freeze when the driver
starts accessing again.

This patch forces the memory/MMIO and bus mastering on when restoring
bridges on EEH. Ideally we'd do this correctly by saving the
configuration space writes later, but that will have to come later in
a larger EEH rewrite. For now we have this simple fix.

The original bug can be triggered on a boston machine by doing:
  echo 0x8000000000000000 > /sys/kernel/debug/powerpc/PCI0001/err_injct_outbound
On boston, this PHB has a PCIe switch on it.  Without this patch,
you'll see two EEH events, 1 expected and 1 the failure we are fixing
here. The second EEH event causes the anything under the PHB to
disappear (i.e. the i40e eth).

With this patch, only 1 EEH event occurs and devices properly recover.

Fixes: 652defed4875 ("powerpc/eeh: Check PCIe link after reset")
Cc: stable@vger.kernel.org # v3.11+
Reported-by: Pridhiviraj Paidipeddi 
Signed-off-by: Michael Neuling 
Acked-by: Russell Currey 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops

2018-04-24T07:34:11+00:00

commit 3b8070335f751aac9f1526ae2e012e6f5b8b0f21 upstream.

The OPAL NVRAM driver does not sleep in case it gets OPAL_BUSY or
OPAL_BUSY_EVENT from firmware, which causes large scheduling
latencies, and various lockup errors to trigger (again, BMC reboot
can cause it).

Fix this by converting it to the standard form OPAL_BUSY loop that
sleeps.

Fixes: 628daa8d5abf ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks")
Depends-on: 34dd25de9fe3 ("powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops

2018-04-24T07:34:11+00:00

commit 34dd25de9fe3f60bfdb31b473bf04b28262d0896 upstream.

This is the start of an effort to tidy up and standardise all the
delays. Existing loops have a range of delay/sleep periods from 1ms
to 20ms, and some have no delay. They all loop forever except rtc,
which times out after 10 retries, and that uses 10ms delays. So use
10ms as our standard delay. The OPAL maintainer agrees 10ms is a
reasonable starting point.

The idea is to use the same recipe everywhere, once this is proven to
work then it will be documented as an OPAL API standard. Then both
firmware and OS can agree, and if a particular call needs something
else, then that can be documented with reasoning.

This is not the end-all of this effort, it's just a relatively easy
change that fixes some existing high latency delays. There should be
provision for standardising timeouts and/or interruptible loops where
possible, so non-fatal firmware errors don't cause hangs.

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman 
Cc: Nathan Chancellor 
Cc: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

powerpc/64: Fix smp_wmb barrier definition use use lwsync consistently

2018-04-24T07:34:11+00:00

commit 0bfdf598900fd62869659f360d3387ed80eb71cf upstream.

asm/barrier.h is not always included after asm/synch.h, which meant
it was missing __SUBARCH_HAS_LWSYNC, so in some files smp_wmb() would
be eieio when it should be lwsync. kernel/time/hrtimer.c is one case.

__SUBARCH_HAS_LWSYNC is only used in one place, so just fold it in
to where it's used. Previously with my small simulator config, 377
instances of eieio in the tree. After this patch there are 55.

Fixes: 46d075be585e ("powerpc: Optimise smp_wmb")
Cc: stable@vger.kernel.org # v2.6.29+
Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

powerpc/powernv: Handle unknown OPAL errors in opal_nvram_write()

2018-04-24T07:34:11+00:00

commit 741de617661794246f84a21a02fc5e327bffc9ad upstream.

opal_nvram_write currently just assumes success if it encounters an
error other than OPAL_BUSY or OPAL_BUSY_EVENT. Have it return -EIO
on other errors instead.

Fixes: 628daa8d5abf ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Nicholas Piggin 
Reviewed-by: Vasant Hegde 
Acked-by: Stewart Smith 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

powerpc/8xx: fix mpc8xx_get_irq() return on no irq

2018-04-13T17:48:18+00:00

[ Upstream commit 3c29b6038828c1f4c9ecbfec14d4fc5e25f1c947 ]

IRQ 0 is a valid HW interrupt. So get_irq() shall return 0 when
there is no irq, instead of returning irq_linear_revmap(... ,0)

Fixes: f2a0bd3753dad ("[POWERPC] 8xx: powerpc port of core CPM PIC")
Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman