linux-toradex.git/arch/ppc/kernel/setup.c, branch v2.6.17.3

[PATCH] for_each_possible_cpu: ppc

2006-03-29T02:44:16+00:00

for_each_cpu() actually iterates across all possible CPUs.  We've had mistakes
in the past where people were using for_each_cpu() where they should have been
iterating across only online or present CPUs.  This is inefficient and
possibly buggy.

We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the
future.

This patch replaces for_each_cpu with for_each_possible_cpu.

Signed-off-by: KAMEZAWA Hiroyuki 
Signed-off-by: Andrew Morton 
Signed-off-by: Paul Mackerras

ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppc

2006-03-27T23:22:10+00:00

32-bit CHRP machines are now supported only in arch/powerpc, as are
all 64-bit PowerPC processors.  This means that we don't use
Open Firmware on any platform in arch/ppc any more.

This makes PReP support a single-platform option like every other
platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM
is gone from arch/ppc.  CONFIG_PPC_PREP is the option that selects
PReP support and is generally what has replaced
CONFIG_PPC_MULTIPLATFORM within arch/ppc.

_machine is all but dead now, being #defined to 0.

Updated Makefiles, comments and Kconfig options generally to reflect
these changes.

Signed-off-by: Paul Mackerras

[PATCH] more for_each_cpu() conversions

2006-03-23T15:38:17+00:00

When we stop allocating percpu memory for not-possible CPUs we must not touch
the percpu data for not-possible CPUs at all.  The correct way of doing this
is to test cpu_possible() or to use for_each_cpu().

This patch is a kernel-wide sweep of all instances of NR_CPUS.  I found very
few instances of this bug, if any.  But the patch converts lots of open-coded
test to use the preferred helper macros.

Cc: Mikael Starvik 
Cc: David Howells 
Acked-by: Kyle McMartin 
Cc: Anton Blanchard 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Martin Schwidefsky 
Cc: Heiko Carstens 
Cc: Paul Mundt 
Cc: "David S. Miller" 
Cc: William Lee Irwin III 
Cc: Andi Kleen 
Cc: Christian Zankel 
Cc: Philippe Elie 
Cc: Nathan Scott 
Cc: Jens Axboe 
Cc: Eric Dumazet 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] ppc: Remove powermac support from ARCH=ppc

2006-01-15T06:30:44+00:00

This makes it possible to build kernels for PReP and/or CHRP
with ARCH=ppc by removing the (non-building) powermac support.
It's now also possible to select PReP and CHRP independently.
Powermac users should now build with ARCH=powerpc instead of
ARCH=ppc.  (This does mean that it is no longer possible to
build a 32-bit kernel for a G5.)

Signed-off-by: Paul Mackerras

[PATCH] powerpc: Unify udbg (#2)

2006-01-09T03:49:54+00:00

This patch unifies udbg for both ppc32 and ppc64 when building the
merged achitecture. xmon now has a single "back end". The powermac udbg
stuff gets enriched with some ADB capabilities and btext output. In
addition, the early_init callback is now called on ppc32 as well,
approx. in the same order as ppc64 regarding device-tree manipulations.
The init sequences of ppc32 and ppc64 are getting closer, I'll unify
them in a later patch.

For now, you can force udbg to the scc using "sccdbg" or to btext using
"btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg
output to something else than the autodetected OF output device in a
later patch.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[PATCH] ppc: Fix boot with yaboot with ARCH=ppc

2005-11-16T02:51:58+00:00

The merge of machine types broke boot with yaboot & ARCH=ppc due to the
old code still retreiving the old-syle machine type passed in by yaboot.
This patch fixes it by translating those old numbers. Since that whole
mecanism is deprecated, this is a temporary fix until ARCH=ppc uses the
new prom_init that the merged architecture now uses for both ppc32 and
ppc64 (after 2.6.15)

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: merge code values for identifying platforms

2005-11-10T02:37:51+00:00

This patch merges platform codes.  systemcfg->platform is no longer used,
systemcfg use in general is deprecated as much as possible (and renamed
_systemcfg before it gets completely moved elsewhere in a future patch),
_machine is now used on ppc64 along as ppc32.  Platform codes aren't gone
yet but we are getting a step closer. A bunch of asm code in head[_64].S
is also turned into C code.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

ppc: Various minor compile fixes

2005-10-11T12:08:12+00:00

This fixes up a variety of minor problems in compiling with ARCH=ppc
arising from using the merged versions of various header files.
A lot of the changes are just adding #include  to
files that use ppc_md or smp_ops_t.

This also arranges for us to use semaphore.c, vecemu.c, vector.S and
fpu.S from arch/powerpc/kernel when compiling with ARCH=ppc.

Signed-off-by: Paul Mackerras

ppc: Adapt to asm-powerpc/irq.h irq_canonicalize changes

2005-10-11T12:03:09+00:00

Now instead of having a ppc_md function, we just have a variable
which says whether to do the i8259 irq canonicalization or not,
and set that variable on the platforms that need that.  It looks
to me that radstone_ppc7d was trying to use irq canonicalization
for something else in a broken kind of way - it will need to be
fixed properly.

Signed-off-by: Paul Mackerras

[PATCH] ppc32: make cur_cpu_spec a single pointer instead of an array

2005-09-28T05:42:54+00:00

Changed ppc32 so that cur_cpu_spec is just a single pointer for all CPUs.
Additionally, made call_setup_cpu check to see if the cpu_setup pointer
is NULL or not before calling the function.  This lets remove the dummy
cpu_setup calls that just return.

Signed-off-by: Kumar Gala 
Signed-off-by: Paul Mackerras