This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM
extension to online/offline any hart. As a result, the harts are
returned to firmware once they are offline. If the harts are brought
online afterwards, they re-enter Linux kernel as if a secondary hart
booted for the first time. All booting requirements are honored during
this process.

Tested both on QEMU and HighFive Unleashed board with. Test result follows.

---------------------------------------------------
Offline cpu 2
---------------------------------------------------
$ echo 0 > /sys/devices/system/cpu/cpu2/online
[   32.828684] CPU2: off
$ cat /proc/cpuinfo
processor       : 0
hart            : 0
isa             : rv64imafdcsu
mmu             : sv48

processor       : 1
hart            : 1
isa             : rv64imafdcsu
mmu             : sv48

processor       : 3
hart            : 3
isa             : rv64imafdcsu
mmu             : sv48

processor       : 4
hart            : 4
isa             : rv64imafdcsu
mmu             : sv48

processor       : 5
hart            : 5
isa             : rv64imafdcsu
mmu             : sv48

processor       : 6
hart            : 6
isa             : rv64imafdcsu
mmu             : sv48

processor       : 7
hart            : 7
isa             : rv64imafdcsu
mmu             : sv48

---------------------------------------------------
online cpu 2
---------------------------------------------------
$ echo 1 > /sys/devices/system/cpu/cpu2/online
$ cat /proc/cpuinfo
processor       : 0
hart            : 0
isa             : rv64imafdcsu
mmu             : sv48

processor       : 1
hart            : 1
isa             : rv64imafdcsu
mmu             : sv48

processor       : 2
hart            : 2
isa             : rv64imafdcsu
mmu             : sv48

processor       : 3
hart            : 3
isa             : rv64imafdcsu
mmu             : sv48

processor       : 4
hart            : 4
isa             : rv64imafdcsu
mmu             : sv48

processor       : 5
hart            : 5
isa             : rv64imafdcsu
mmu             : sv48

processor       : 6
hart            : 6
isa             : rv64imafdcsu
mmu             : sv48

processor       : 7
hart            : 7
isa             : rv64imafdcsu
mmu             : sv48

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Currently, all harts have to jump Linux in RISC-V. This complicates the
multi-stage boot process as every transient stage also has to ensure all
harts enter to that stage and jump to Linux afterwards. It also obstructs
a clean Kexec implementation.

SBI HSM extension provides alternate solutions where only a single hart
need to boot and enter Linux. The booting hart can bring up secondary
harts one by one afterwards.

Add SBI HSM based cpu_ops that implements an ordered booting method in
RISC-V. This change is also backward compatible with older firmware not
implementing HSM extension. If a latest kernel is used with older
firmware, it will continue to use the default spinning booting method.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>