linux-toradex.git/arch/s390/kernel/perf_pai_ext.c, branch v6.7

s390/pai: cleanup event initialization

2023-11-22T12:54:57+00:00

Setting event::hw.last_tag to zero is not necessary. The memory
for each event is dynamically allocated by the kernel common code and
initialized to zero already.  Remove this unnecessary assignment.
Move the comment to function paicrypt_start() for clarification.

Suggested-by: Sumanth Korikkar 
Acked-by: Sumanth Korikkar 
Signed-off-by: Thomas Richter 
Signed-off-by: Alexander Gordeev

s390/pai: initialize event count once at initialization

2023-10-25T13:08:29+00:00

Event count value is initialized and set to zero in function
paicrypt_start().  This function is called once per CPU when an
event is started on that CPU. This leads to event count value
being set to zero as many times as there are online CPUs.
This is not necessary. The event count value is bound to the event
and it is sufficient to initialize the event counter once at
event creation time. This is done when the event structure
is dynamicly allocated with __GFP_ZERO flag. This sets
member count to zero.

Acked-by: Sumanth Korikkar 
Signed-off-by: Thomas Richter 
Signed-off-by: Vasily Gorbik

s390/pai_crypto: use PERF_ATTACH_TASK define for per task detection

2023-10-25T13:08:29+00:00

Use define PERF_ATTACH_TASK bit in event->attach_state to determine
system wide invocation or per task invocation in event initialization.
This bit is set in common code and before calling PMU device driver
specific event initialization.
It is set once and never changes. It is save to use and also in
sync with other PMU specific code.
No functional change.

Acked-by: Sumanth Korikkar 
Signed-off-by: Thomas Richter 
Signed-off-by: Vasily Gorbik

s390: use control register bit defines

2023-09-19T11:26:57+00:00

Use control register bit defines instead of plain numbers where
possible.

Reviewed-by: Alexander Gordeev 
Signed-off-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik

s390/ctlreg: add local and system prefix to some functions

2023-09-19T11:26:56+00:00

Add local and system prefix to some functions to clarify they change
control register contents on either the local CPU or the on all CPUs.

This results in the following API:

Two defines which load and save multiple control registers.
The defines correlate with the following C prototypes:

void __local_ctl_load(unsigned long *, unsigned int cr_low, unsigned int cr_high);
void __local_ctl_store(unsigned long *, unsigned int cr_low, unsigned int cr_high);

Two functions which locally set or clear one bit for a specified
control register:

void local_ctl_set_bit(unsigned int cr, unsigned int bit);
void local_ctl_clear_bit(unsigned int cr, unsigned int bit);

Two functions which set or clear one bit for a specified control
register on all CPUs:

void system_ctl_set_bit(unsigned int cr, unsigned int bit);
void system_ctl_clear_bit(unsigend int cr, unsigned int bit);

Reviewed-by: Alexander Gordeev 
Signed-off-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik

s390/ctlreg: rename ctl_reg.h to ctlreg.h

2023-09-19T11:26:56+00:00

Rename ctl_reg.h to ctlreg.h so it matches not only ctlreg.c but also
other control register related function, union, and structure names,
which all come with a ctlreg prefix.

Reviewed-by: Alexander Gordeev 
Signed-off-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik

s390: fix various typos

2023-07-03T09:19:42+00:00

Fix various typos found with codespell.

Signed-off-by: Heiko Carstens 
Signed-off-by: Alexander Gordeev

s390/pai_ext: replace atomic_t with refcount_t

2023-05-15T12:12:14+00:00

The s390 PMU of PAI extension 1 NNPA counters uses atomic_t for
reference counting. Replace this with the proper data type
refcount_t.

No functional change.

Signed-off-by: Thomas Richter 
Acked-by: Sumanth Korikkar 
Signed-off-by: Alexander Gordeev

Merge tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2023-02-21T23:09:17+00:00

Pull s390 updates from Heiko Carstens:

 - Large cleanup of the con3270/tty3270 driver. Among others this fixes:
     - Background Color Support
     - ASCII Line Character Support
     - VT100 Support
     - Geometries other than 80x24

 - Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to
   uaccess functions, which will be used by KVM to access KVM guest
   memory with a specific storage key

 - Add support for user space events counting to CPUMF

 - Cleanup the vfio/ccw code, which also allows now to properly support
   2K Format-2 IDALs

 - Move kernel page table allocation and initialization to decompressor,
   which finally allows to enter the kernel with dynamic address
   translation enabled. This in turn allows to get rid of code with
   special handling in the kernel, which has to distinguish if DAT is on
   or off

 - Replace kretprobe with rethook

 - Various improvements to vfio/ap queue resets:
     - Use TAPQ to verify completion of a reset in progress rather than
       multiple invocations of ZAPQ.
     - Check TAPQ response codes when verifying successful completion of
       ZAPQ.
     - Fix erroneous handling of some error response codes.
     - Increase the maximum amount of time to wait for successful
       completion of ZAPQ

 - Rework system call wrappers to get rid of alias functions, which were
   only left on s390

 - Cleanup diag288_wdt watchdog driver. It has been agreed on with
   Guenter Roeck that this goes upstream via the s390 tree

 - Add missing loadparm parameter handling for list-directed ECKD
   ipl/reipl

 - Various improvements to memory detection code

 - Remove arch_cpu_idle_time() since the current implementation is
   broken, and allows user space observable accounted idle times which
   can temporarily decrease

 - Add Reset DAT-Protection support: (only) allow to change PTEs from RO
   to RW with a new RDP instruction. Unlike the currently used IPTE
   instruction, this does not necessarily guarantee that TLBs of all
   CPUs are synchronously flushed; and that remote CPUs can see spurious
   protection faults. The overall improvement for not requiring an all
   CPU synchronization, like it is required with IPTE, should be
   beneficial

 - Fix KFENCE page fault reporting

 - Smaller cleanups and improvement all over the place

* tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (182 commits)
  s390/irq,idle: simplify idle check
  s390/processor: add test_and_set_cpu_flag() and test_and_clear_cpu_flag()
  s390/processor: let cpu helper functions return boolean values
  s390/kfence: fix page fault reporting
  s390/zcrypt: introduce ctfm field in struct CPRBX
  s390: remove confusing comment from uapi types header file
  vfio/ccw: remove WARN_ON during shutdown
  s390/entry: remove toolchain dependent micro-optimization
  s390/mem_detect: do not truncate online memory ranges info
  s390/vx: remove __uint128_t type from __vector128 struct again
  s390/mm: add support for RDP (Reset DAT-Protection)
  s390/mm: define private VM_FAULT_* reasons from top bits
  Documentation: s390: correct spelling
  s390/ap: fix status returned by ap_qact()
  s390/ap: fix status returned by ap_aqic()
  s390: vfio-ap: tighten the NIB validity check
  Revert "s390/mem_detect: do not update output parameters on failure"
  s390/idle: remove arch_cpu_idle_time() and corresponding code
  s390/vx: use simple assignments to access __vector128 members
  s390/vx: add 64 and 128 bit members to __vector128 struct
  ...

s390/cpum_cf: merge source files for CPU Measurement counter facility

2023-01-25T19:51:10+00:00

With no in-kernel user, the source files can be merged.

Move all functions and the variable definitions to file perf_cpum_cf.c
This file now contains all the necessary functions and definitions
for the CPU Measurement counter facility device driver.

The files cpu_mcf.h and perf_cpum_cf_common.c are deleted.

Signed-off-by: Thomas Richter 
Acked-by: Hendrik Brueckner 
Signed-off-by: Heiko Carstens