Pull crypto library updates from Eric Biggers:
 "This is the main crypto library pull request for 6.17. The main focus
  this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
  high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
  and establishing conventions for lib/crypto/ going forward:

   - Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
     most of the SHA-512 code) into lib/crypto/. This includes both the
     generic and architecture-optimized code. Greatly simplify how the
     architecture-optimized code is integrated. Add an easy-to-use
     library API for each SHA variant, including HMAC support. Finally,
     reimplement the crypto_shash support on top of the library API.

   - Apply the same reorganization to the SHA-256 code (and also SHA-224
     which shares most of the SHA-256 code). This is a somewhat smaller
     change, due to my earlier work on SHA-256. But this brings in all
     the same additional improvements that I made for SHA-1 and SHA-512.

  There are also some smaller changes:

   - Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
     from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
     these algorithms it's just a move, not a full reorganization yet.

   - Fix the MIPS chacha-core.S to build with the clang assembler.

   - Fix the Poly1305 functions to work in all contexts.

   - Fix a performance regression in the x86_64 Poly1305 code.

   - Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.

  Note that since the new organization of the SHA code is much simpler,
  the diffstat of this pull request is negative, despite the addition of
  new fully-documented library APIs for multiple SHA and HMAC-SHA
  variants.

  These APIs will allow further simplifications across the kernel as
  users start using them instead of the old-school crypto API. (I've
  already written a lot of such conversion patches, removing over 1000
  more lines of code. But most of those will target 6.18 or later)"

* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
  lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
  lib/crypto: x86/sha1-ni: Convert to use rounds macros
  lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
  crypto: sha1 - Remove sha1_base.h
  lib/crypto: x86/sha1: Migrate optimized code into library
  lib/crypto: sparc/sha1: Migrate optimized code into library
  lib/crypto: s390/sha1: Migrate optimized code into library
  lib/crypto: powerpc/sha1: Migrate optimized code into library
  lib/crypto: mips/sha1: Migrate optimized code into library
  lib/crypto: arm64/sha1: Migrate optimized code into library
  lib/crypto: arm/sha1: Migrate optimized code into library
  crypto: sha1 - Use same state format as legacy drivers
  crypto: sha1 - Wrap library and add HMAC support
  lib/crypto: sha1: Add HMAC support
  lib/crypto: sha1: Add SHA-1 library functions
  lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
  crypto: x86/sha1 - Rename conflicting symbol
  lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
  lib/crypto: arm/poly1305: Remove unneeded empty weak function
  lib/crypto: x86/poly1305: Fix performance regression on short messages
  ...

Move the s390-optimized CRC code from arch/s390/lib/crc* into its new
location in lib/crc/s390/, and wire it up in the new way.  This new way
of organizing the CRC code eliminates the need to artificially split the
code for each CRC variant into separate arch and generic modules,
enabling better inlining and dead code elimination.  For more details,
see "lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/".

Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20250607200454.73587-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

Move the contents of arch/s390/lib/crypto/ into lib/crypto/s390/.

The new code organization makes a lot more sense for how this code
actually works and is developed.  In particular, it makes it possible to
build each algorithm as a single module, with better inlining and dead
code elimination.  For a more detailed explanation, see the patchset
which did this for the CRC library code:
https://lore.kernel.org/r/20250607200454.73587-1-ebiggers@kernel.org/.
Also see the patchset which did this for SHA-512:
https://lore.kernel.org/linux-crypto/20250616014019.415791-1-ebiggers@kernel.org/

This is just a preparatory commit, which does the move to get the files
into their new location but keeps them building the same way as before.
Later commits will make the actual improvements to the way the
arch-optimized code is integrated for each algorithm.

Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20250619191908.134235-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

Pull crypto updates from Herbert Xu:
 "API:
   - Fix memcpy_sglist to handle partially overlapping SG lists
   - Use memcpy_sglist to replace null skcipher
   - Rename CRYPTO_TESTS to CRYPTO_BENCHMARK
   - Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS
   - Hide CRYPTO_MANAGER
   - Add delayed freeing of driver crypto_alg structures

  Compression:
   - Allocate large buffers on first use instead of initialisation in scomp
   - Drop destination linearisation buffer in scomp
   - Move scomp stream allocation into acomp
   - Add acomp scatter-gather walker
   - Remove request chaining
   - Add optional async request allocation

  Hashing:
   - Remove request chaining
   - Add optional async request allocation
   - Move partial block handling into API
   - Add ahash support to hmac
   - Fix shash documentation to disallow usage in hard IRQs

  Algorithms:
   - Remove unnecessary SIMD fallback code on x86 and arm/arm64
   - Drop avx10_256 xts(aes)/ctr(aes) on x86
   - Improve avx-512 optimisations for xts(aes)
   - Move chacha arch implementations into lib/crypto
   - Move poly1305 into lib/crypto and drop unused Crypto API algorithm
   - Disable powerpc/poly1305 as it has no SIMD fallback
   - Move sha256 arch implementations into lib/crypto
   - Convert deflate to acomp
   - Set block size correctly in cbcmac

  Drivers:
   - Do not use sg_dma_len before mapping in sun8i-ss
   - Fix warm-reboot failure by making shutdown do more work in qat
   - Add locking in zynqmp-sha
   - Remove cavium/zip
   - Add support for PCI device 0x17D8 to ccp
   - Add qat_6xxx support in qat
   - Add support for RK3576 in rockchip-rng
   - Add support for i.MX8QM in caam

  Others:
   - Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up
   - Add new SEV/SNP platform shutdown API in ccp"

* tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits)
  x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining
  crypto: qat - add missing header inclusion
  crypto: api - Redo lookup on EEXIST
  Revert "crypto: testmgr - Add hash export format testing"
  crypto: marvell/cesa - Do not chain submitted requests
  crypto: powerpc/poly1305 - add depends on BROKEN for now
  Revert "crypto: powerpc/poly1305 - Add SIMD fallback"
  crypto: ccp - Add missing tee info reg for teev2
  crypto: ccp - Add missing bootloader info reg for pspv5
  crypto: sun8i-ce - move fallback ahash_request to the end of the struct
  crypto: octeontx2 - Use dynamic allocated memory region for lmtst
  crypto: octeontx2 - Initialize cptlfs device info once
  crypto: xts - Only add ecb if it is not already there
  crypto: lrw - Only add ecb if it is not already there
  crypto: testmgr - Add hash export format testing
  crypto: testmgr - Use ahash for generic tfm
  crypto: hmac - Add ahash support
  crypto: testmgr - Ignore EEXIST on shash allocation
  crypto: algapi - Add driver template support to crypto_inst_setname
  crypto: shash - Set reqsize in shash_alg
  ...

The use of the term "glue" in filenames is a Crypto API-ism that does
not show up elsewhere in lib/.  I think adopting it there was a mistake.
The library just uses standard functions, so the amount of code that
could be considered "glue" is quite small.  And while often the C
functions just wrap the assembly functions, there are also cases like
crc32c_arch() in arch/x86/lib/crc32-glue.c that blur the line by
in-lining the actual implementation into the C function.  That's not
"glue code", but rather the actual code.

Therefore, let's drop "glue" from the filenames and instead use e.g.
crc32.c instead of crc32-glue.c.

Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424002038.179114-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the s390 ChaCha library functions into a
new directory arch/s390/lib/crypto/ that does not depend on CRYPTO.
This mirrors the distinction between crypto/ and lib/crypto/.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move the s390 CRC32 assembly code into the lib directory and wire it up
to the library interface.  This allows it to be used without going
through the crypto API.  It remains usable via the crypto API too via
the shash algorithms that use the library interface.  Thus all the
arch-specific "shash" code becomes unnecessary and is removed.

Note: to see the diff from arch/s390/crypto/crc32-vx.c to
arch/s390/lib/crc32-glue.c, view this commit with 'git show -M10'.

Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20241202010844.144356-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

Currently, kernel modules contain their own set of expoline thunks. In
the case of EXPOLINE_EXTERN, this involves postlinking of precompiled
expoline.o. expoline.o is also necessary for out-of-source tree module
builds.

Now that the kernel modules area is less than 4 GB away from
kernel expoline thunks, make modules use kernel expolines. Also make
EXPOLINE_EXTERN the default if the compiler supports it. This simplifies
build and aligns with the approach adopted by other architectures.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Provide a faster variant of csum_partial() which uses vector registers
instead of the cksm instruction.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390 has instructions to support 128 bit arithmetics, e.g. a 64 bit
multiply instruction with a 128 bit result. Also 128 bit integer
artithmetics are already used in s390 specific architecture code (see
e.g. read_persistent_clock64()).

Therefore select ARCH_SUPPORTS_INT128.

However limit this to clang for now, since gcc generates inefficient code,
which may lead to stack overflows, when compiling
lib/crypto/curve25519-hacl64.c which depends on ARCH_SUPPORTS_INT128. The
gcc generated functions have 6kb stack frames, compared to only 1kb of the
code generated with clang.

If the kernel is compiled with -Os library calls for __ashlti3(),
__ashrti3(), and __lshrti3() may be generated. Similar to arm64
and riscv provide assembler implementations for these functions.

Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>