linux-toradex.git/arch/s390, branch v3.10.41

s390/bpf,jit: initialize A register if 1st insn is BPF_S_LDX_B_MSH

2014-05-13T11:59:42+00:00

commit 6e0de817594c61f3b392a9245deeb09609ec707d upstream.

The A register needs to be initialized to zero in the prolog if the
first instruction of the BPF program is BPF_S_LDX_B_MSH to prevent
leaking the content of %r5 to user space.

Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

s390/cio: fix driver callback initialization for ccw consoles

2014-05-06T14:55:27+00:00

commit 2253e8d79237c69086ded391e6767afe16972527 upstream.

ccw consoles are in use before they can be properly registered with
the driver core. For devices which are in use by a device driver we
rely on the ccw_device's pointer to the driver callbacks to be valid.
For ccw consoles this pointer is NULL until they are registered later
during boot and we dereferenced this pointer. This worked by
chance on 64 bit builds (cdev->drv was NULL but the optional callback
cdev->drv->path_event was also NULL by coincidence) and was unnoticed
until we received reports about boot failures on 31 bit systems.
Fix it by initializing the driver pointer for ccw consoles.

Reported-by: Mike Frysinger 
Reported-by: Heiko Carstens 
Reviewed-by: Peter Oberparleiter 
Signed-off-by: Sebastian Ott 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test

2014-04-14T13:42:19+00:00

commit 03b8c7b623c80af264c4c8d6111e5c6289933666 upstream.

If an architecture has futex_atomic_cmpxchg_inatomic() implemented and there
is no runtime check necessary, allow to skip the test within futex_init().

This allows to get rid of some code which would always give the same result,
and also allows the compiler to optimize a couple of if statements away.

Signed-off-by: Heiko Carstens 
Cc: Finn Thain 
Cc: Geert Uytterhoeven 
Link: http://lkml.kernel.org/r/20140302120947.GA3641@osiris
Signed-off-by: Thomas Gleixner 
[geert: Backported to v3.10..v3.13]
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Greg Kroah-Hartman

s390: fix kernel crash due to linkage stack instructions

2014-02-22T20:41:26+00:00

commit 8d7f6690cedb83456edd41c9bd583783f0703bf0 upstream.

The kernel currently crashes with a low-address-protection exception
if a user space process executes an instruction that tries to use the
linkage stack. Set the base-ASTE origin and the subspace-ASTE origin
of the dispatchable-unit-control-table to point to a dummy ASTE.
Set up control register 15 to point to an empty linkage stack with no
room left.

A user space process with a linkage stack instruction will still crash
but with a different exception which is correctly translated to a
segmentation fault instead of a kernel oops.

Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

s390/dump: Fix dump memory detection

2014-02-22T20:41:26+00:00

commit d7736ff5be31edaa4fe5ab62810c64529a24b149 upstream.

Dumps created by kdump or zfcpdump can contain invalid memory holes when
dumping z/VM systems that have memory pressure.

For example:

   # zgetdump -i /proc/vmcore.
   Memory map:
   0000000000000000 - 0000000000bfffff (12 MB)
   0000000000e00000 - 00000000014fffff (7 MB)
   000000000bd00000 - 00000000f3bfffff (3711 MB)

The memory detection function find_memory_chunks() issues tprot to
find valid memory chunks. In case of CMM it can happen that pages are
marked as unstable via set_page_unstable() in arch_free_page().
If z/VM has released that pages, tprot returns -EFAULT and indicates
a memory hole.

So fix this and switch off CMM in case of kdump or zfcpdump.

Signed-off-by: Michael Holzheu 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

crypto: s390 - fix des and des3_ede ctr concurrency issue

2014-02-20T19:06:10+00:00

commit ee97dc7db4cbda33e4241c2d85b42d1835bc8a35 upstream.

In s390 des and 3des ctr mode there is one preallocated page
used to speed up the en/decryption. This page is not protected
against concurrent usage and thus there is a potential of data
corruption with multiple threads.

The fix introduces locking/unlocking the ctr page and a slower
fallback solution at concurrency situations.

Signed-off-by: Harald Freudenberger 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: s390 - fix des and des3_ede cbc concurrency issue

2014-02-20T19:06:10+00:00

commit adc3fcf1552b6e406d172fd9690bbd1395053d13 upstream.

In s390 des and des3_ede cbc mode the iv value is not protected
against concurrency access and modifications from another running
en/decrypt operation which is using the very same tfm struct
instance. This fix copies the iv to the local stack before
the crypto operation and stores the value back when done.

Signed-off-by: Harald Freudenberger 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: s390 - fix concurrency issue in aes-ctr mode

2014-02-20T19:06:10+00:00

commit 0519e9ad89e5cd6e6b08398f57c6a71d9580564c upstream.

The aes-ctr mode uses one preallocated page without any concurrency
protection. When multiple threads run aes-ctr encryption or decryption
this can lead to data corruption.

The patch introduces locking for the page and a fallback solution with
slower en/decryption performance in concurrency situations.

Signed-off-by: Harald Freudenberger 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

s390/bpf,jit: fix 32 bit divisions, use unsigned divide instructions

2014-02-06T19:08:16+00:00

[ Upstream commit 3af57f78c38131b7a66e2b01e06fdacae01992a3 ]

The s390 bpf jit compiler emits the signed divide instructions "dr" and "d"
for unsigned divisions.
This can cause problems: the dividend will be zero extended to a 64 bit value
and the divisor is the 32 bit signed value as specified A or X accumulator,
even though A and X are supposed to be treated as unsigned values.

The divide instrunctions will generate an exception if the result cannot be
expressed with a 32 bit signed value.
This is the case if e.g. the dividend is 0xffffffff and the divisor either 1
or also 0xffffffff (signed: -1).

To avoid all these issues simply use unsigned divide instructions.

Signed-off-by: Heiko Carstens 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bpf: do not use reciprocal divide

2014-02-06T19:08:16+00:00

[ Upstream commit aee636c4809fa54848ff07a899b326eb1f9987a2 ]

At first Jakub Zawadzki noticed that some divisions by reciprocal_divide
were not correct. (off by one in some cases)
http://www.wireshark.org/~darkjames/reciprocal-buggy.c

He could also show this with BPF:
http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c

The reciprocal divide in linux kernel is not generic enough,
lets remove its use in BPF, as it is not worth the pain with
current cpus.

Signed-off-by: Eric Dumazet 
Reported-by: Jakub Zawadzki 
Cc: Mircea Gherzan 
Cc: Daniel Borkmann 
Cc: Hannes Frederic Sowa 
Cc: Matt Evans 
Cc: Martin Schwidefsky 
Cc: Heiko Carstens 
Cc: David S. Miller 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman