linux-toradex.git/arch/s390, branch v4.9-rc5

Merge branch 'maybe-uninitialized' (patches from Arnd)

2016-11-11T18:03:01+00:00

Merge fixes for -Wmaybe-uninitialized from Arnd Bergmann:
 "It took a while for some patches to make it into mainline through
  maintainer trees, but the 28-patch series is now reduced to 10, with
  one tiny patch added at the end.

  Aside from patches that are no longer required, I did these changes
  compared to version 1:

   - Dropped "iio: maxim_thermocouple: detect invalid storage size in
     read()", which is currently in linux-next as commit 32cb7d27e65d.
     This is the only remaining warning I see for a couple of corner
     cases (kbuild bot reports it on blackfin, kernelci bot and arm-soc
     bot both report it on arm64)

   - Dropped "brcmfmac: avoid maybe-uninitialized warning in
     brcmf_cfg80211_start_ap", which is currently in net/master merge
     pending.

   - Dropped two x86 patches, "x86: math-emu: possible uninitialized
     variable use" and "x86: mark target address as output in 'insb'
     asm" as they do not seem to trigger for a default build, and I got
     no feedback on them. Both of these are ancient issues and seem
     harmless, I will send them again to the x86 maintainers once the
     rest is merged.

   - Dropped "rbd: false-postive gcc-4.9 -Wmaybe-uninitialized" based on
     feedback from Ilya Dryomov, who already has a different fix queued
     up for v4.10. The kbuild bot reports this as a warning for xtensa.

   - Replaced "crypto: aesni: avoid -Wmaybe-uninitialized warning" with
     a simpler patch, this one always triggers but my first solution
     would not be safe for linux-4.9 any more at this point. I'll follow
     up with the larger patch as a cleanup for 4.10.

   - Replaced "dib0700: fix nec repeat handling" with a better one,
     contributed by Sean Young"

* -Wmaybe-uninitialized fixes:
  Kbuild: enable -Wmaybe-uninitialized warnings by default
  pcmcia: fix return value of soc_pcmcia_regulator_set
  infiniband: shut up a maybe-uninitialized warning
  crypto: aesni: shut up -Wmaybe-uninitialized warning
  rc: print correct variable for z8f0811
  dib0700: fix nec repeat handling
  s390: pci: don't print uninitialized data for debugging
  nios2: fix timer initcall return value
  x86: apm: avoid uninitialized data
  NFSv4.1: work around -Wmaybe-uninitialized warning
  Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"

s390: pci: don't print uninitialized data for debugging

2016-11-11T16:45:08+00:00

gcc correctly warns about an incorrect use of the 'pa' variable in case
we pass an empty scatterlist to __s390_dma_map_sg:

  arch/s390/pci/pci_dma.c: In function '__s390_dma_map_sg':
  arch/s390/pci/pci_dma.c:309:13: warning: 'pa' may be used uninitialized in this function [-Wmaybe-uninitialized]

This adds a bogus initialization to the function to sanitize the debug
output.  I would have preferred a solution without the initialization,
but I only got the report from the kbuild bot after turning on the
warning again, and didn't manage to reproduce it myself.

Signed-off-by: Arnd Bergmann 
Acked-by: Sebastian Ott 
Acked-by: Martin Schwidefsky 
Signed-off-by: Linus Torvalds

mm: kmemleak: scan .data.ro_after_init

2016-11-11T16:12:37+00:00

Limit the number of kmemleak false positives by including
.data.ro_after_init in memory scanning.  To achieve this we need to add
symbols for start and end of the section to the linker scripts.

The problem was been uncovered by commit 56989f6d8568 ("genetlink: mark
families as __ro_after_init").

Link: http://lkml.kernel.org/r/1478274173-15218-1-git-send-email-jakub.kicinski@netronome.com
Reviewed-by: Catalin Marinas 
Signed-off-by: Jakub Kicinski 
Cc: Arnd Bergmann 
Cc: Cong Wang 
Cc: Johannes Berg 
Cc: Martin Schwidefsky 
Cc: Heiko Carstens 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2016-11-09T19:09:40+00:00

Pull s390 fixes from Martin Schwidefsky:
 "Two bug fixes

   - a memory alignment fix in the s390 only hypfs code

   - a fix for the generic percpu code that caused ftrace to break on
     s390. This is not relevant for x86 but for all architectures that
     use the generic percpu code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  percpu: use notrace variant of preempt_disable/preempt_enable
  s390/hypfs: Use get_free_page() instead of kmalloc to ensure page alignment

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2016-11-04T20:08:05+00:00

Pull KVM updates from Paolo Bonzini:
 "One NULL pointer dereference, and two fixes for regressions introduced
  during the merge window.

  The rest are fixes for MIPS, s390 and nested VMX"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86: Check memopp before dereference (CVE-2016-8630)
  kvm: nVMX: VMCLEAR an active shadow VMCS after last use
  KVM: x86: drop TSC offsetting kvm_x86_ops to fix KVM_GET/SET_CLOCK
  KVM: x86: fix wbinvd_dirty_mask use-after-free
  kvm/x86: Show WRMSR data is in hex
  kvm: nVMX: Fix kernel panics induced by illegal INVEPT/INVVPID types
  KVM: document lock orders
  KVM: fix OOPS on flush_work
  KVM: s390: Fix STHYI buffer alignment for diag224
  KVM: MIPS: Precalculate MMIO load resume PC
  KVM: MIPS: Make ERET handle ERL before EXL
  KVM: MIPS: Fix lazy user ASID regenerate for SMP

s390/hypfs: Use get_free_page() instead of kmalloc to ensure page alignment

2016-10-28T08:08:58+00:00

Since commit d86bd1bece6f ("mm/slub: support left redzone") it is no longer
guaranteed that kmalloc(PAGE_SIZE) returns page aligned memory.

After the above commit we get an error for diag224 because aligned
memory is required. This leads to the following user visible error:

 # mount none -t s390_hypfs /sys/hypervisor/
 mount: unknown filesystem type 's390_hypfs'

 # dmesg | grep hypfs
 hypfs.cccfb8: The hardware system does not provide all functions
               required by hypfs
 hypfs.7a79f0: Initialization of hypfs failed with rc=-61

Fix this problem and use get_free_page() instead of kmalloc() to get
correctly aligned memory.

Cc: stable@vger.kernel.org # v3.6+
Signed-off-by: Michael Holzheu 
Signed-off-by: Martin Schwidefsky

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2016-10-27T21:16:30+00:00

Pull s390 fixes from Martin Schwidefsky:
 "A few more s390 patches for 4.9:
   - a fix for an overflow in the dasd driver reported by UBSAN
   - fix a regression and add hotplug memory to the zone movable again
   - add ignore defines for the pkey system calls
   - fix the ouput of the merged stack tracer
   - replace printk with pr_cont in arch/s390 where appropriate
   - remove the arch specific return_address function again
   - ignore reserved channel paths at boot time
   - add a missing hugetlb_bad_size call to the arch backend"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: fix zone calculation in arch_add_memory()
  s390/dumpstack: use pr_cont within show_stack and die
  s390/dumpstack: get rid of return_address again
  s390/disassambler: use pr_cont where appropriate
  s390/dumpstack: use pr_cont where appropriate
  s390/dumpstack: restore reliable indicator for call traces
  s390/mm: use hugetlb_bad_size()
  s390/cio: don't register chpids in reserved state
  s390: ignore pkey system calls
  s390/dasd: avoid undefined behaviour

Merge tag 'kvm-s390-master-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

2016-10-27T11:22:54+00:00

KVM: s390: Fix wrong memory allocation

With commit d86bd1bece6f ("mm/slub: support left redzone") or
with slab debugging the allocation of our diag224 buffer is not
aligned properly. Let's fix this.

KVM: s390: Fix STHYI buffer alignment for diag224

2016-10-26T11:46:44+00:00

Diag224 requires a page-aligned 4k buffer to store the name table
into. kmalloc does not guarantee page alignment, hence we replace it
with __get_free_page for the buffer allocation.

Cc: stable@vger.kernel.org # v4.8+
Reported-by: Michael Holzheu 
Signed-off-by: Janosch Frank 
Reviewed-by: Cornelia Huck 
Signed-off-by: Christian Borntraeger

s390/mm: fix zone calculation in arch_add_memory()

2016-10-24T08:26:17+00:00

Standby (hotplug) memory should be added to ZONE_MOVABLE on s390. After
commit 199071f1 "s390/mm: make arch_add_memory() NUMA aware",
arch_add_memory() used memblock_end_of_DRAM() to find out the end of
ZONE_NORMAL and the beginning of ZONE_MOVABLE. However, commit 7f36e3e5
"memory-hotplug: add hot-added memory ranges to memblock before allocate
node_data for a node." moved the call of memblock_add_node() before
the call of arch_add_memory() in add_memory_resource(), and thus changed
the return value of memblock_end_of_DRAM() when called in
arch_add_memory(). As a result, arch_add_memory() will think that all
memory blocks should be added to ZONE_NORMAL.

Fix this by changing the logic in arch_add_memory() so that it will
manually iterate over all zones of a given node to find out which zone
a memory block should be added to.

Reviewed-by: Heiko Carstens 
Signed-off-by: Gerald Schaefer 
Signed-off-by: Martin Schwidefsky