Pull networking updates from Jakub Kicinski:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - eth: stmmac: fix failure to probe without MAC interface specified

  Current release - new code bugs:

   - docs: netlink: fix missing classic_netlink doc reference

  Previous releases - regressions:

   - deal with integer overflows in kmalloc_reserve()

   - use sk_forward_alloc_get() in sk_get_meminfo()

   - bpf_sk_storage: fix the missing uncharge in sk_omem_alloc

   - fib: avoid warn splat in flow dissector after packet mangling

   - skb_segment: call zero copy functions before using skbuff frags

   - eth: sfc: check for zero length in EF10 RX prefix

  Previous releases - always broken:

   - af_unix: fix msg_controllen test in scm_pidfd_recv() for
     MSG_CMSG_COMPAT

   - xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()

   - netfilter:
      - nft_exthdr: fix non-linear header modification
      - xt_u32, xt_sctp: validate user space input
      - nftables: exthdr: fix 4-byte stack OOB write
      - nfnetlink_osf: avoid OOB read
      - one more fix for the garbage collection work from last release

   - igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU

   - bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t

   - handshake: fix null-deref in handshake_nl_done_doit()

   - ip: ignore dst hint for multipath routes to ensure packets are
     hashed across the nexthops

   - phy: micrel:
      - correct bit assignments for cable test errata
      - disable EEE according to the KSZ9477 errata

  Misc:

   - docs/bpf: document compile-once-run-everywhere (CO-RE) relocations

   - Revert "net: macsec: preserve ingress frame ordering", it appears
     to have been developed against an older kernel, problem doesn't
     exist upstream"

* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
  net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
  Revert "net: team: do not use dynamic lockdep key"
  net: hns3: remove GSO partial feature bit
  net: hns3: fix the port information display when sfp is absent
  net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
  net: hns3: fix debugfs concurrency issue between kfree buffer and read
  net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
  net: hns3: Support query tx timeout threshold by debugfs
  net: hns3: fix tx timeout issue
  net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
  netfilter: nf_tables: Unbreak audit log reset
  netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
  netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
  netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
  netfilter: nfnetlink_osf: avoid OOB read
  netfilter: nftables: exthdr: fix 4-byte stack OOB write
  selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
  bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
  bpf: bpf_sk_storage: Fix invalid wait context lockdep report
  s390/bpf: Pass through tail call counter in trampolines
  ...

Pull kvm updates from Paolo Bonzini:
 "ARM:

   - Clean up vCPU targets, always returning generic v8 as the preferred
     target

   - Trap forwarding infrastructure for nested virtualization (used for
     traps that are taken from an L2 guest and are needed by the L1
     hypervisor)

   - FEAT_TLBIRANGE support to only invalidate specific ranges of
     addresses when collapsing a table PTE to a block PTE. This avoids
     that the guest refills the TLBs again for addresses that aren't
     covered by the table PTE.

   - Fix vPMU issues related to handling of PMUver.

   - Don't unnecessary align non-stack allocations in the EL2 VA space

   - Drop HCR_VIRT_EXCP_MASK, which was never used...

   - Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
     parameter instead

   - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()

   - Remove prototypes without implementations

  RISC-V:

   - Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest

   - Added ONE_REG interface for SATP mode

   - Added ONE_REG interface to enable/disable multiple ISA extensions

   - Improved error codes returned by ONE_REG interfaces

   - Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V

   - Added get-reg-list selftest for KVM RISC-V

  s390:

   - PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)

     Allows a PV guest to use crypto cards. Card access is governed by
     the firmware and once a crypto queue is "bound" to a PV VM every
     other entity (PV or not) looses access until it is not bound
     anymore. Enablement is done via flags when creating the PV VM.

   - Guest debug fixes (Ilya)

  x86:

   - Clean up KVM's handling of Intel architectural events

   - Intel bugfixes

   - Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
     debug registers and generate/handle #DBs

   - Clean up LBR virtualization code

   - Fix a bug where KVM fails to set the target pCPU during an IRTE
     update

   - Fix fatal bugs in SEV-ES intrahost migration

   - Fix a bug where the recent (architecturally correct) change to
     reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
     skip it)

   - Retry APIC map recalculation if a vCPU is added/enabled

   - Overhaul emergency reboot code to bring SVM up to par with VMX, tie
     the "emergency disabling" behavior to KVM actually being loaded,
     and move all of the logic within KVM

   - Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
     TSC ratio MSR cannot diverge from the default when TSC scaling is
     disabled up related code

   - Add a framework to allow "caching" feature flags so that KVM can
     check if the guest can use a feature without needing to search
     guest CPUID

   - Rip out the ancient MMU_DEBUG crud and replace the useful bits with
     CONFIG_KVM_PROVE_MMU

   - Fix KVM's handling of !visible guest roots to avoid premature
     triple fault injection

   - Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
     API surface that is needed by external users (currently only
     KVMGT), and fix a variety of issues in the process

  Generic:

   - Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
     events to pass action specific data without needing to constantly
     update the main handlers.

   - Drop unused function declarations

  Selftests:

   - Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs

   - Add support for printf() in guest code and covert all guest asserts
     to use printf-based reporting

   - Clean up the PMU event filter test and add new testcases

   - Include x86 selftests in the KVM x86 MAINTAINERS entry"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
  KVM: x86/mmu: Include mmu.h in spte.h
  KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
  KVM: x86/mmu: Disallow guest from using !visible slots for page tables
  KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
  KVM: x86/mmu: Harden new PGD against roots without shadow pages
  KVM: x86/mmu: Add helper to convert root hpa to shadow page
  drm/i915/gvt: Drop final dependencies on KVM internal details
  KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
  KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
  KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
  KVM: x86/mmu: Assert that correct locks are held for page write-tracking
  KVM: x86/mmu: Rename page-track APIs to reflect the new reality
  KVM: x86/mmu: Drop infrastructure for multiple page-track modes
  KVM: x86/mmu: Use page-track notifiers iff there are external users
  KVM: x86/mmu: Move KVM-only page-track declarations to internal header
  KVM: x86: Remove the unused page-track hook track_flush_slot()
  drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
  KVM: x86: Add a new page-track hook to handle memslot deletion
  drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
  KVM: x86: Reject memslot MOVE operations if KVMGT is attached
  ...

Pull more s390 updates from Heiko Carstens:

 - A couple of virtual vs physical address confusion fixes

 - Rework locking in dcssblk driver to address a lockdep warning

 - Remove support for "noexec" kernel command line option since there is
   no use case where it would make sense

 - Simplify kernel mapping setup and get rid of quite a bit of code

 - Add architecture specific __set_memory_yy() functions which allow us
   to modify kernel mappings. Unlike the set_memory_xx() variants they
   take void pointer start and end parameters, which allows using them
   without the usual casts, and also to use them on areas larger than
   8TB.

   Note that the set_memory_xx() family comes with an int num_pages
   parameter which overflows with 8TB. This could be addressed by
   changing the num_pages parameter to unsigned long, however requires
   to change all architectures, since the module code expects an int
   parameter (see module_set_memory()).

   This was indeed an issue since for debug_pagealloc() we call
   set_memory_4k() on the whole identity mapping. Therefore address this
   for now with the __set_memory_yy() variant, and address common code
   later

 - Use dev_set_name() and also fix memory leak in zcrypt driver error
   handling

 - Remove unused lsi_mask from airq_struct

 - Add warning for invalid kernel mapping requests

* tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vmem: do not silently ignore mapping limit
  s390/zcrypt: utilize dev_set_name() ability to use a formatted string
  s390/zcrypt: don't leak memory if dev_set_name() fails
  s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion
  s390/airq: remove lsi_mask from airq_struct
  s390/mm: use __set_memory() variants where useful
  s390/set_memory: add __set_memory() variant
  s390/set_memory: generate all set_memory() functions
  s390/mm: improve description of mapping permissions of prefix pages
  s390/amode31: change type of __samode31, __eamode31, etc
  s390/mm: simplify kernel mapping setup
  s390: remove "noexec" option
  s390/vmem: fix virtual vs physical address confusion
  s390/dcssblk: fix lockdep warning
  s390/monreader: fix virtual vs physical address confusion

s390x eBPF programs use the following extension to the s390x calling
convention: tail call counter is passed on stack at offset
STK_OFF_TCCNT, which callees otherwise use as scratch space.

Currently trampoline does not respect this and clobbers tail call
counter. This breaks enforcing tail call limits in eBPF programs, which
have trampolines attached to them.

Fix by forwarding a copy of the tail call counter to the original eBPF
program in the trampoline (for fexit), and by restoring it at the end
of the trampoline (for fentry).

Fixes: 528eb2cb87bc ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Reported-by: Leon Hwang <hffilwlqm@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230906004448.111674-1-iii@linux.ibm.com

The only interface that allows drivers establishing
liner mappings is vmem_add_mapping(). It does check
a requested range against allowed limits and a call
to modify_pagetable() with an invalid mapping range
is impossible.

Hence, an attempt to map an address range outside of
the identity mapping or vmemmap array could only be
kernel bug.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

MAX_DMA_ADDRESS is defined and treated as a physical address,
whereas it should be virtual.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Pull Kbuild updates from Masahiro Yamada:

 - Enable -Wenum-conversion warning option

 - Refactor the rpm-pkg target

 - Fix scripts/setlocalversion to consider annotated tags for rt-kernel

 - Add a jump key feature for the search menu of 'make nconfig'

 - Support Qt6 for 'make xconfig'

 - Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow,
   and -Wrestrict warnings for W=1 builds

 - Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and
   sparc

 - Support DEB_BUILD_OPTIONS=parallel=N for the debian source package

 - Refactor scripts/Makefile.modinst and fix some modules_sign issues

 - Add a new Kconfig env variable to warn symbols that are not defined
   anywhere

 - Show help messages of config fragments in 'make help'

* tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (62 commits)
  kconfig: fix possible buffer overflow
  kbuild: Show marked Kconfig fragments in "help"
  kconfig: add warn-unknown-symbols sanity check
  kbuild: dummy-tools: make MPROFILE_KERNEL checks work on BE
  Documentation/llvm: refresh docs
  modpost: Skip .llvm.call-graph-profile section check
  kbuild: support modules_sign for external modules as well
  kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n
  kbuild: move more module installation code to scripts/Makefile.modinst
  kbuild: reduce the number of mkdir calls during modules_install
  kbuild: remove $(MODLIB)/source symlink
  kbuild: move depmod rule to scripts/Makefile.modinst
  kbuild: add modules_sign to no-{compiler,sync-config}-targets
  kbuild: do not run depmod for 'make modules_sign'
  kbuild: deb-pkg: support DEB_BUILD_OPTIONS=parallel=N in debian/rules
  alpha: remove <asm/export.h>
  alpha: replace #include <asm/export.h> with #include <linux/export.h>
  ia64: remove <asm/export.h>
  ia64: replace #include <asm/export.h> with #include <linux/export.h>
  sparc: remove <asm/export.h>
  ...

Currently the Kconfig fragments in kernel/configs and arch/*/configs
that aren't used internally aren't discoverable through "make help",
which consists of hard-coded lists of config fragments. Instead, list
all the fragment targets that have a "# Help: " comment prefix so the
targets can be generated dynamically.

Add logic to the Makefile to search for and display the fragment and
comment. Add comments to fragments that are intended to be direct targets.

Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull x86 shadow stack support from Dave Hansen:
 "This is the long awaited x86 shadow stack support, part of Intel's
  Control-flow Enforcement Technology (CET).

  CET consists of two related security features: shadow stacks and
  indirect branch tracking. This series implements just the shadow stack
  part of this feature, and just for userspace.

  The main use case for shadow stack is providing protection against
  return oriented programming attacks. It works by maintaining a
  secondary (shadow) stack using a special memory type that has
  protections against modification. When executing a CALL instruction,
  the processor pushes the return address to both the normal stack and
  to the special permission shadow stack. Upon RET, the processor pops
  the shadow stack copy and compares it to the normal stack copy.

  For more information, refer to the links below for the earlier
  versions of this patch set"

Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/

* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
  x86/shstk: Change order of __user in type
  x86/ibt: Convert IBT selftest to asm
  x86/shstk: Don't retry vm_munmap() on -EINTR
  x86/kbuild: Fix Documentation/ reference
  x86/shstk: Move arch detail comment out of core mm
  x86/shstk: Add ARCH_SHSTK_STATUS
  x86/shstk: Add ARCH_SHSTK_UNLOCK
  x86: Add PTRACE interface for shadow stack
  selftests/x86: Add shadow stack test
  x86/cpufeatures: Enable CET CR4 bit for shadow stack
  x86/shstk: Wire in shadow stack interface
  x86: Expose thread features in /proc/$PID/status
  x86/shstk: Support WRSS for userspace
  x86/shstk: Introduce map_shadow_stack syscall
  x86/shstk: Check that signal frame is shadow stack mem
  x86/shstk: Check that SSP is aligned on sigreturn
  x86/shstk: Handle signals for shadow stack
  x86/shstk: Introduce routines modifying shstk
  x86/shstk: Handle thread shadow stack
  x86/shstk: Add user-mode shadow stack support
  ...

- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
  Allows a PV guest to use crypto cards. Card access is governed by
  the firmware and once a crypto queue is "bound" to a PV VM every
  other entity (PV or not) looses access until it is not bound
  anymore. Enablement is done via flags when creating the PV VM.

- Guest debug fixes (Ilya)