linux-toradex.git/arch/sh/Makefile, branch v5.0 Linux kernel for Apalis and Colibri modules sh: generate uapi header and syscall table header files 2018-12-19T16:54:40+00:00 Firoz Khan firoz.khan@linaro.org 2018-11-14T04:32:10+00:00 2b3c5a99d5f314960e00950c1782eac9361de30f System call table generation script must be run to gener- ate unistd_32.h and syscall_table.h files. This patch will have changes which will invokes the script. This patch will generate unistd_32.h and syscall_table.h files by the syscall table generation script invoked by sh/Makefile and the generated files against the removed files must be identical. The generated uapi header file will be included in uapi/- asm/unistd.h and generated system call table header file will be included by kernel/syscall_32.S file. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
System call table generation script must be run to gener-
ate unistd_32.h and syscall_table.h files. This patch will
have changes which will invokes the script.

This patch will generate unistd_32.h and syscall_table.h
files by the syscall table generation script invoked by
sh/Makefile and the generated files against the removed
files must be identical.

The generated uapi header file will be included in uapi/-
asm/unistd.h and generated system call table header file
will be included by kernel/syscall_32.S file.

Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
kbuild: rename LDFLAGS to KBUILD_LDFLAGS 2018-08-23T23:22:08+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2018-08-23T23:20:39+00:00 d503ac531a5246e4d910f971b213807fea925956 Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> 
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.

Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.

Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.

For some reason, LDFLAGS was not renamed.

Using a well-known variable like LDFLAGS may result in accidental
override of the variable.

Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.

I did not touch Makefiles under tools/ since the tools build system
is a different world.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
sh: select KBUILD_DEFCONFIG depending on ARCH 2017-11-13T13:58:18+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2017-11-02T17:40:32+00:00 859fd5860cd1bbbd0370ba4f20725999681b66c8 You can not select KBUILD_DEFCONFIG depending on any CONFIG option because include/config/auto.conf is not included when building config targets. So, CONFIG_SUPERH32 is never set during the configuration, then cayman_defconfig is always chosen. This commit provides a sensible way to choose shx3/cayman_defconfig. arch/sh/Kconfig sets either SUPERH32 or SUPERH64 depending on ARCH environment, like follows: config SUPERH32 def_bool ARCH = "sh" ... config SUPERH64 def_bool ARCH = "sh64" It should make sense to choose the default defconfig by ARCH, like arch/sparc/Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 
You can not select KBUILD_DEFCONFIG depending on any CONFIG option
because include/config/auto.conf is not included when building config
targets.  So, CONFIG_SUPERH32 is never set during the configuration,
then cayman_defconfig is always chosen.

This commit provides a sensible way to choose shx3/cayman_defconfig.

arch/sh/Kconfig sets either SUPERH32 or SUPERH64 depending on ARCH
environment, like follows:

  config SUPERH32
          def_bool ARCH = "sh"

          ...

  config SUPERH64
          def_bool ARCH = "sh64"

It should make sense to choose the default defconfig by ARCH,
like arch/sparc/Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
sh: Use full path in KBUILD_IMAGE definition 2017-03-20T13:42:20+00:00 Michal Marek mmarek@suse.com 2016-11-22T21:34:32+00:00 e62c527efb07fa62a549cb03109a4d0265cedce2 The KBUILD_IMAGE variable is used by the rpm and deb-pkg targets, which expect it to point to the image file in the build directory. The builddeb script has a workaround for architectures which only provide the basename, but let's provide a clean interface for packaging tools. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Michal Marek <mmarek@suse.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 
The KBUILD_IMAGE variable is used by the rpm and deb-pkg targets, which
expect it to point to the image file in the build directory. The
builddeb script has a workaround for architectures which only provide
the basename, but let's provide a clean interface for packaging tools.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
sh: support CPU_J2 when compiler lacks -mj2 2016-10-13T20:15:41+00:00 Rich Felker dalias@libc.org 2016-10-09T06:35:08+00:00 f208b87b48d5af2ea483293eccb3998c467dfba1 Signed-off-by: Rich Felker <dalias@libc.org> 
Signed-off-by: Rich Felker <dalias@libc.org>
sh: add support for J-Core J2 processor 2016-08-05T03:29:31+00:00 Rich Felker dalias@libc.org 2016-03-17T23:09:37+00:00 5a846abad07f6f30adfa3e46c5c7a47d2e7b1e63 At the CPU/ISA level, the J2 is compatible with SH-2, and thus the changes to add J2 support build on existing SH-2 support. However, J2 does not duplicate the memory-mapped SH-2 features like the cache interface. Instead, the cache interfaces is described in the device tree, and new code is added to be able to access the flat device tree at early boot before it is unflattened. Support is also added for receiving interrupts on trap numbers in the range 16 to 31, since the J-Core aic1 interrupt controller generates these traps. This range was unused but nominally for hardware exceptions on SH-2, and a few values in this range were used for exceptions on SH-2A, but SH-2A has its own version of the relevant code. No individual cpu subtypes are added for J2 since the intent moving forward is to represent SoCs with device tree rather than as hard-coded subtypes in the kernel. The CPU_SUBTYPE_J2 Kconfig item exists only to fit into the existing cpu selection mechanism until it is overhauled. Signed-off-by: Rich Felker <dalias@libc.org> 
At the CPU/ISA level, the J2 is compatible with SH-2, and thus the
changes to add J2 support build on existing SH-2 support. However, J2
does not duplicate the memory-mapped SH-2 features like the cache
interface. Instead, the cache interfaces is described in the device
tree, and new code is added to be able to access the flat device tree
at early boot before it is unflattened.

Support is also added for receiving interrupts on trap numbers in the
range 16 to 31, since the J-Core aic1 interrupt controller generates
these traps. This range was unused but nominally for hardware
exceptions on SH-2, and a few values in this range were used for
exceptions on SH-2A, but SH-2A has its own version of the relevant
code.

No individual cpu subtypes are added for J2 since the intent moving
forward is to represent SoCs with device tree rather than as
hard-coded subtypes in the kernel. The CPU_SUBTYPE_J2 Kconfig item
exists only to fit into the existing cpu selection mechanism until it
is overhauled.

Signed-off-by: Rich Felker <dalias@libc.org>
sh: add support for linking a builtin device tree blob in the kernel 2016-07-31T03:33:32+00:00 Rich Felker dalias@libc.org 2016-03-26T01:24:30+00:00 190fe191cfbead9fe089453dd092869c9469c6d4 Signed-off-by: Rich Felker <dalias@libc.org> 
Signed-off-by: Rich Felker <dalias@libc.org>
sh: also try passing -m4-nofpu for SH2A builds 2014-07-23T22:10:54+00:00 Geert Uytterhoeven geert+renesas@glider.be 2014-07-23T21:00:06+00:00 b1923b55af43a6febb976084bf30d1a4797c92c9 When compiling a SH2A kernel (e.g. se7206_defconfig or rsk7203_defconfig) using sh4-linux-gcc, linking fails with: net/built-in.o: In function `__sk_run_filter': net/core/filter.c:566: undefined reference to `__fpscr_values' net/core/filter.c:269: undefined reference to `__fpscr_values' ... net/built-in.o:net/core/filter.c:580: more undefined references to `__fpscr_values' follow This happens because sh4-linux-gcc doesn't support the "-m2a-nofpu", which is thus filtered out by "$(call cc-option, ...)". As compiling using sh4-linux-gcc is useful for compile coverage, also try passing "-m4-nofpu" (which is presumably filtered out when using a real sh2a-linux toolchain) to disable the generation of FPU instructions and references to __fpscr_values[]. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Tony Breeds <tony@bakeyournoodle.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
When compiling a SH2A kernel (e.g.  se7206_defconfig or rsk7203_defconfig)
using sh4-linux-gcc, linking fails with:

  net/built-in.o: In function `__sk_run_filter':
  net/core/filter.c:566: undefined reference to `__fpscr_values'
  net/core/filter.c:269: undefined reference to `__fpscr_values'
  ...
  net/built-in.o:net/core/filter.c:580: more undefined references to `__fpscr_values' follow

This happens because sh4-linux-gcc doesn't support the "-m2a-nofpu",
which is thus filtered out by "$(call cc-option, ...)".

As compiling using sh4-linux-gcc is useful for compile coverage, also
try passing "-m4-nofpu" (which is presumably filtered out when using a
real sh2a-linux toolchain) to disable the generation of FPU instructions
and references to __fpscr_values[].

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Tony Breeds <tony@bakeyournoodle.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architectures 2013-12-20T08:38:40+00:00 Kees Cook keescook@chromium.org 2013-12-19T19:35:58+00:00 19952a92037e752f9d3bbbad552d596f9a56e146 Instead of duplicating the CC_STACKPROTECTOR Kconfig and Makefile logic in each architecture, switch to using HAVE_CC_STACKPROTECTOR and keep everything in one place. This retains the x86-specific bug verification scripts. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/1387481759-14535-2-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Instead of duplicating the CC_STACKPROTECTOR Kconfig and
Makefile logic in each architecture, switch to using
HAVE_CC_STACKPROTECTOR and keep everything in one place. This
retains the x86-specific bug verification scripts.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1387481759-14535-2-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sh: Setup CROSS_COMPILE at the top 2012-06-13T02:42:13+00:00 Geert Uytterhoeven geert@linux-m68k.org 2012-05-12T20:39:07+00:00 d14a5fdc26986f7bac8376a339f336be18ba2a90 CROSS_COMPILE must be setup before using e.g. cc-option (and a few other as-*, cc-*, ld-* macros), else they will check against the wrong compiler when cross-compiling, and may invoke the cross compiler with wrong or suboptimal compiler options. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org> 
CROSS_COMPILE must be setup before using e.g. cc-option (and a few other
as-*, cc-*, ld-* macros), else they will check against the wrong compiler
when cross-compiling, and may invoke the cross compiler with wrong or
suboptimal compiler options.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>