linux-toradex.git/arch/sh/kernel/cpu/sh2, branch v4.2.7 Linux kernel for Apalis and Colibri modules sh: Switch to new style CMT device 2014-05-11T10:35:26+00:00 Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com 2014-04-23T11:15:08+00:00 9b17e48cd4df4e129976c37660cf9ec644c66059 The CMT (Compare Match Timer) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style platform data to the new-style platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> 
The CMT (Compare Match Timer) driver implements a new style of platform
data that handles the timer as a single device with multiple channel.
Switch from the old-style platform data to the new-style platform data.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
sh: Don't set plat_sci_port scbrr_algo_id field 2013-12-24T12:49:43+00:00 Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com 2013-12-06T09:59:50+00:00 d5917ef318b850fc72bd10db438580f7d1c406d9 The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> 
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
sh: Declare SCIF register base and IRQ as resources 2013-12-24T12:49:43+00:00 Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com 2013-12-06T09:59:48+00:00 d850acf975bee46e43c3cd80d2d287010195c63b Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> 
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
SH7619: fix typo in Ether platform data 2013-08-22T21:32:18+00:00 Sergei Shtylyov sergei.shtylyov@cogentembedded.com 2013-08-21T22:17:25+00:00 0bf2bbd27717e7766c74205b9aa6f7c462c28f6d Commit 06a64f91da72cb5827e2bedef2ead60a123fd66e (SH7619: fix Ether support) has a typo in the 'phy_interface' field name of the platform data which causes build error -- fix it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Commit 06a64f91da72cb5827e2bedef2ead60a123fd66e (SH7619: fix Ether support)  has
a typo in the 'phy_interface' field name of the platform data which causes build
error -- fix it.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sh_eth: remove 'register_type' field from 'struct sh_eth_plat_data' 2013-08-21T00:10:41+00:00 Sergei Shtylyov sergei.shtylyov@cogentembedded.com 2013-08-17T23:13:26+00:00 8d3214c4e8c8be6efd8ec7a172239ebbd4deb04b Now that the 'register_type' field of the 'sh_eth' driver's platform data is not used by the driver anymore, it's time to remove it and its initializers from the SH platform code. Also move *enum* declaring values for this field from <linux/sh_eth.h> to the local driver's header file as they're only needed by the driver itself now... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Now that the 'register_type' field of the 'sh_eth' driver's platform data is not
used by the driver anymore, it's time to remove it and  its initializers from
the SH platform code. Also  move *enum* declaring values for this  field from
<linux/sh_eth.h>  to  the  local driver's  header file as they're only needed
by the driver itself  now...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SH7619: fix Ether support 2013-08-21T00:10:40+00:00 Sergei Shtylyov sergei.shtylyov@cogentembedded.com 2013-08-17T22:15:42+00:00 06a64f91da72cb5827e2bedef2ead60a123fd66e The 'sh_eth' driver's probe will crash as the platform code is hopelessly behind the platform data -- it passes PHY ID instead of 'struct sh_eth_plat_data *'. Strangely, both commit d88a3ea6fa4c (SH7619 add ethernet controler support) that added the platform code and commit 71557a37adb5 ([netdrvr] sh_eth: Add SH7619 support) were done in about the same time, yet the latter one added 'struct sh_eth_plat_data' and the platform code didn't ever get updated... Add the proper platform data and fix off-by-one memory resource end error, while at it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The 'sh_eth' driver's probe will crash as the platform code is hopelessly behind
the platform data -- it passes PHY ID instead of 'struct sh_eth_plat_data *'.
Strangely, both commit d88a3ea6fa4c (SH7619 add ethernet controler support) that
added the platform code and commit 71557a37adb5 ([netdrvr] sh_eth: Add  SH7619
support)  were done  in about  the same time, yet the latter one added 'struct
sh_eth_plat_data' and the platform code didn't ever get updated...

Add the proper platform data and fix off-by-one memory resource end error, while
at it...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sh: delete __cpuinit usage from all sh files 2013-07-14T23:36:53+00:00 Paul Gortmaker paul.gortmaker@windriver.com 2013-06-18T21:10:12+00:00 4603f53a1dc3c76dfba841d123db9fa6204934f5 The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/sh uses of the __cpuinit macros from all C files. Currently sh does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> 
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/sh uses of the __cpuinit macros from
all C files.  Currently sh does not have any __CPUINIT used in
assembly files.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
sh_eth: get SH7619 support out of #ifdef 2013-06-08T06:38:23+00:00 Sergei Shtylyov sergei.shtylyov@cogentembedded.com 2013-06-07T13:56:05+00:00 c18a79abe31f555ec3b363b5b8c1d003230053b6 Get the SH7619 data in the driver out of #ifdef by adding "sh7619-ether" to the platform driver's ID table. Change the Ether platform device's name in the SH platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Get  the SH7619 data in the driver out of #ifdef by adding "sh7619-ether" to the
platform driver's ID table. Change the Ether platform device's name  in  the SH
platform code accordingly.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sh: sh2: Change the specification method of IRQ to SCIx_IRQ_MUXED 2012-04-17T07:17:33+00:00 Nobuhiro Iwamatsu nobuhiro.iwamatsu.yj@renesas.com 2012-04-13T03:14:03+00:00 e00e7cb3b70e8aec5aa732b51394b841c7b4b571 Some SCIF devices specify the same IRQ. We can use SCIx_IRQ_MUXED for this. This is correction to the SH2/SH2A series. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 
Some SCIF devices specify the same IRQ. We can use SCIx_IRQ_MUXED for this.
This is correction to the SH2/SH2A series.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
sh: sh2 sh_clk_ops rename 2012-03-12T21:19:10+00:00 Magnus Damm damm@opensource.se 2012-02-29T13:17:24+00:00 71984236d6112d6eb735f449cf3253c2d35d2767 Convert sh2 to use sh_clk_ops. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 
Convert sh2 to use sh_clk_ops.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>