Add the listns() system call to all architectures.

Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-20-2e6f823ebdc0@kernel.org
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull scheduler updates from Ingo Molnar:
 "Core scheduler changes:

   - Make migrate_{en,dis}able() inline, to improve performance
     (Menglong Dong)

   - Move STDL_INIT() functions out-of-line (Peter Zijlstra)

   - Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)

  Fair scheduling:

   - Defer throttling to when tasks exit to user-space, to reduce the
     chance & impact of throttle-preemption with held locks and other
     resources (Aaron Lu, Valentin Schneider)

   - Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
     warning was getting triggered on certain topologies (Peter
     Zijlstra)

  Misc cleanups & fixes:

   - Header cleanups (Menglong Dong)

   - Fix race in push_dl_task() (Harshit Agarwal)"

* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix some typos in include/linux/preempt.h
  sched: Make migrate_{en,dis}able() inline
  rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
  arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
  sched/fair: Do not balance task to a throttled cfs_rq
  sched/fair: Do not special case tasks in throttled hierarchy
  sched/fair: update_cfs_group() for throttled cfs_rqs
  sched/fair: Propagate load for throttled cfs_rq
  sched/fair: Get rid of throttled_lb_pair()
  sched/fair: Task based throttle time accounting
  sched/fair: Switch to task based throttle model
  sched/fair: Implement throttle task work and related helpers
  sched/fair: Add related data structure for task based throttle
  sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
  sched: Move STDL_INIT() functions out-of-line
  sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
  sched/deadline: Fix race in push_dl_task()

The include/generated/asm-offsets.h is generated in Kbuild during
compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to
generate another similar offset header file, circular dependency can
happen.

For example, we want to generate a offset file include/generated/test.h,
which is included in include/sched/sched.h. If we generate asm-offsets.h
first, it will fail, as include/sched/sched.h is included in asm-offsets.c
and include/generated/test.h doesn't exist; If we generate test.h first,
it can't success neither, as include/generated/asm-offsets.h is included
by it.

In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular
dependency. We can generate asm-offsets.h first, and if the
COMPILE_OFFSETS is defined, we don't include the "generated/test.h".

And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this
purpose.

Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>

With the introduction of clone3 in commit 7f192e3cd316 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit, with a new type of u64 for the flags.
However, for most consumers of clone_flags the interface was not
changed from the previous type of unsigned long.

While this works fine as long as none of the new 64-bit flag bits
(CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still
undesirable in terms of the principle of least surprise.

Thus, this commit fixes all relevant interfaces of the copy_thread
function that is called from copy_process to consistently pass
clone_flags as u64, so that no truncation to 32-bit integers occurs on
32-bit architectures.

Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-3-53fcf5577d57@siemens-energy.com
Fixes: c5febea0956fd387 ("fork: Pass struct kernel_clone_args into copy_thread")
Acked-by: Guo Ren (Alibaba Damo Academy) <guoren@kernel.org>
Acked-by: Andreas Larsson <andreas@gaisler.com> # sparc
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull non-MM updates from Andrew Morton:
 "Significant patch series in this pull request:

   - "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
     us closer to being able to remove page->mapping

   - "relayfs: misc changes" (Jason Xing) does some maintenance and
     minor feature addition work in relayfs

   - "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
     us from static preallocation of the kdump crashkernel's working
     memory over to dynamic allocation. So the difficulty of a-priori
     estimation of the second kernel's needs is removed and the first
     kernel obtains extra memory

   - "generalize panic_print's dump function to be used by other
     kernel parts" (Feng Tang) implements some consolidation and
     rationalization of the various ways in which a failing kernel
     splats information at the operator

* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
  tools/getdelays: add backward compatibility for taskstats version
  kho: add test for kexec handover
  delaytop: enhance error logging and add PSI feature description
  samples: Kconfig: fix spelling mistake "instancess" -> "instances"
  fat: fix too many log in fat_chain_add()
  scripts/spelling.txt: add notifer||notifier to spelling.txt
  xen/xenbus: fix typo "notifer"
  net: mvneta: fix typo "notifer"
  drm/xe: fix typo "notifer"
  cxl: mce: fix typo "notifer"
  KVM: x86: fix typo "notifer"
  MAINTAINERS: add maintainers for delaytop
  ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
  ucount: fix atomic_long_inc_below() argument type
  kexec: enable CMA based contiguous allocation
  stackdepot: make max number of pools boot-time configurable
  lib/xxhash: remove unused functions
  init/Kconfig: restore CONFIG_BROKEN help text
  lib/raid6: update recov_rvv.c zero page usage
  docs: update docs after introducing delaytop
  ...

Pull execve updates from Kees Cook:

 - Introduce regular REGSET note macros arch-wide (Dave Martin)

 - Remove arbitrary 4K limitation of program header size (Yin Fengwei)

 - Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi)

* tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits)
  fork: reorder function qualifiers for copy_clone_args_from_user
  binfmt_elf: remove the 4k limitation of program header size
  binfmt_elf: Warn on missing or suspicious regset note names
  xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
  ...

Patch series "kdump: crashkernel reservation from CMA", v5.

This series implements a way to reserve additional crash kernel memory
using CMA.

Currently, all the memory for the crash kernel is not usable by the 1st
(production) kernel.  It is also unmapped so that it can't be corrupted by
the fault that will eventually trigger the crash.  This makes sense for
the memory actually used by the kexec-loaded crash kernel image and initrd
and the data prepared during the load (vmcoreinfo, ...).  However, the
reserved space needs to be much larger than that to provide enough
run-time memory for the crash kernel and the kdump userspace.  Estimating
the amount of memory to reserve is difficult.  Being too careful makes
kdump likely to end in OOM, being too generous takes even more memory from
the production system.  Also, the reservation only allows reserving a
single contiguous block (or two with the "low" suffix).  I've seen systems
where this fails because the physical memory is fragmented.

By reserving additional crashkernel memory from CMA, the main crashkernel
reservation can be just large enough to fit the kernel and initrd image,
minimizing the memory taken away from the production system.  Most of the
run-time memory for the crash kernel will be memory previously available
to userspace in the production system.  As this memory is no longer
wasted, the reservation can be done with a generous margin, making kdump
more reliable.  Kernel memory that we need to preserve for dumping is
normally not allocated from CMA, unless it is explicitly allocated as
movable.  Currently this is only the case for memory ballooning and zswap.
Such movable memory will be missing from the vmcore.  User data is
typically not dumped by makedumpfile.  When dumping of user data is
intended this new CMA reservation cannot be used.

There are five patches in this series:

The first adds a new ",cma" suffix to the recenly introduced generic
crashkernel parsing code.  parse_crashkernel() takes one more argument to
store the cma reservation size.

The second patch implements reserve_crashkernel_cma() which performs the
reservation.  If the requested size is not available in a single range,
multiple smaller ranges will be reserved.

The third patch updates Documentation/, explicitly mentioning the
potential DMA corruption of the CMA-reserved memory.

The fourth patch adds a short delay before booting the kdump kernel,
allowing pending DMA transfers to finish.

The fifth patch enables the functionality for x86 as a proof of
concept. There are just three things every arch needs to do:
- call reserve_crashkernel_cma()
- include the CMA-reserved ranges in the physical memory map
- exclude the CMA-reserved ranges from the memory available
  through /proc/vmcore by excluding them from the vmcoreinfo
  PT_LOAD ranges.

Adding other architectures is easy and I can do that as soon as this
series is merged.

With this series applied, specifying
	crashkernel=100M craskhernel=1G,cma
on the command line will make a standard crashkernel reservation
of 100M, where kexec will load the kernel and initrd.

An additional 1G will be reserved from CMA, still usable by the production
system.  The crash kernel will have 1.1G memory available.  The 100M can
be reliably predicted based on the size of the kernel and initrd.

The new cma suffix is completely optional. When no
crashkernel=size,cma is specified, everything works as before.


This patch (of 5):

Add a new cma_size parameter to parse_crashkernel().  When not NULL, call
__parse_crashkernel to parse the CMA reservation size from
"crashkernel=size,cma" and store it in cma_size.

Set cma_size to NULL in all calls to parse_crashkernel().

Link: https://lkml.kernel.org/r/aEqnxxfLZMllMC8I@dwarf.suse.cz
Link: https://lkml.kernel.org/r/aEqoQckgoTQNULnh@dwarf.suse.cz
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Instead of having the core code guess the note name for each regset,
use USER_REGSET_NOTE_TYPE() to pick the correct name from elf.h.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: linux-sh@vger.kernel.org
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20250701135616.29630-19-Dave.Martin@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>

Introduce file_getattr() and file_setattr() syscalls to manipulate inode
extended attributes. The syscalls takes pair of file descriptor and
pathname. Then it operates on inode opened accroding to openat()
semantics. The struct file_attr is passed to obtain/change extended
attributes.

This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference
that file don't need to be open as we can reference it with a path
instead of fd. By having this we can manipulated inode extended
attributes not only on regular files but also on special ones. This
is not possible with FS_IOC_FSSETXATTR ioctl as with special files
we can not call ioctl() directly on the filesystem inode using fd.

This patch adds two new syscalls which allows userspace to get/set
extended inode attributes on special files by using parent directory
and a path - *at() like syscall.

CC: linux-api@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: linux-xfs@vger.kernel.org
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull Kbuild updates from Masahiro Yamada:

 - Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
   exports a symbol only to specified modules

 - Improve ABI handling in gendwarfksyms

 - Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n

 - Add checkers for redundant or missing <linux/export.h> inclusion

 - Deprecate the extra-y syntax

 - Fix a genksyms bug when including enum constants from *.symref files

* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
  genksyms: Fix enum consts from a reference affecting new values
  arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
  kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
  efi/libstub: use 'targets' instead of extra-y in Makefile
  module: make __mod_device_table__* symbols static
  scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
  scripts/misc-check: check missing #include <linux/export.h> when W=1
  scripts/misc-check: add double-quotes to satisfy shellcheck
  kbuild: move W=1 check for scripts/misc-check to top-level Makefile
  scripts/tags.sh: allow to use alternative ctags implementation
  kconfig: introduce menu type enum
  docs: symbol-namespaces: fix reST warning with literal block
  kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
  tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
  docs/core-api/symbol-namespaces: drop table of contents and section numbering
  modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
  kbuild: move kbuild syntax processing to scripts/Makefile.build
  Makefile: remove dependency on archscripts for header installation
  Documentation/kbuild: Add new gendwarfksyms kABI rules
  Documentation/kbuild: Drop section numbers
  ...