linux-toradex.git/arch/sparc/kernel/perf_event.c, branch v3.3.4

sparc: Detect and handle UltraSPARC-T3 cpu types.

2011-07-28T05:10:10+00:00

The cpu compatible string we look for is "SPARC-T3".

As far as memset/memcpy optimizations go, we treat this chip the same
as Niagara-T2/T2+.  Use cache initializing stores for memset, and use
perfetch, FPU block loads, cache initializing stores, and block stores
for copies.

We use the Niagara-T2 perf support, since T3 is a close relative in
this regard.  Later we'll add support for the new events T3 can
report, plus enable T3's new "sample" mode.

For now I haven't added any new ELF hwcap flags.  We probably need
to add a couple, for example:

T2 and T3 both support the population count instruction in hardware.

T3 supports VIS3 instructions, including support (finally) for
partitioned shift.  One can also now move directly between float
and integer registers.

T3 supports instructions meant to help with Galois Field and other HPC
calculations, such as XOR multiply.  Also there are "OP and negate"
instructions, for example "fnmul" which is multiply-and-negate.

T3 recognizes the transactional memory opcodes, however since
transactional memory isn't supported: 1) 'commit' behaves as a NOP and
2) 'chkpt' always branches 3) 'rdcps' returns all zeros and 4) 'wrcps'
behaves as a NOP.

So we'll need about 3 new elf capability flags in the end to represent
all of these things.

Signed-off-by: David S. Miller

atomic: use

2011-07-26T23:49:47+00:00

This allows us to move duplicated code in 
(atomic_inc_not_zero() for now) to 

Signed-off-by: Arun Sharma 
Reviewed-by: Eric Dumazet 
Cc: Ingo Molnar 
Cc: David Miller 
Cc: Eric Dumazet 
Acked-by: Mike Frysinger 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

perf, arch: Add generic NODE cache events

2011-07-01T09:06:38+00:00

Add a NODE level to the generic cache events which is used to measure
local vs remote memory accesses. Like all other cache events, an
ACCESS is HIT+MISS, if there is no way to distinguish between reads
and writes do reads only etc..

The below needs filling out for !x86 (which I filled out with
unsupported events).

I'm fairly sure ARM can leave it like that since it doesn't strike me as
an architecture that even has NUMA support. SH might have something since
it does appear to have some NUMA bits.

Sparc64, PowerPC and MIPS certainly want a good look there since they
clearly are NUMA capable.

Signed-off-by: Peter Zijlstra 
Cc: David Miller 
Cc: Anton Blanchard 
Cc: David Daney 
Cc: Deng-Cheng Zhu 
Cc: Paul Mundt 
Cc: Will Deacon 
Cc: Robert Richter 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/r/1303508226.4865.8.camel@laptop
Signed-off-by: Ingo Molnar

perf: Remove the nmi parameter from the swevent and overflow interface

2011-07-01T09:06:35+00:00

The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.

For the various event classes:

  - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
    the PMI-tail (ARM etc.)
  - tracepoint: nmi=0; since tracepoint could be from NMI context.
  - software: nmi=[0,1]; some, like the schedule thing cannot
    perform wakeups, and hence need 0.

As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).

The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.

Signed-off-by: Peter Zijlstra 
Cc: Michael Cree 
Cc: Will Deacon 
Cc: Deng-Cheng Zhu 
Cc: Anton Blanchard 
Cc: Eric B Munson 
Cc: Heiko Carstens 
Cc: Paul Mundt 
Cc: David S. Miller 
Cc: Frederic Weisbecker 
Cc: Jason Wessel 
Cc: Don Zickus 
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org
Signed-off-by: Ingo Molnar

sparc: consolidate show_cpuinfo in cpu.c

2011-04-21T22:45:45+00:00

We have all the cpu related info in cpu.c - so move
the remaining functions to support /proc/cpuinfo to this file.

Signed-off-by: Sam Ravnborg 
Signed-off-by: David S. Miller

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

perf: Dynamic pmu types

2010-12-16T10:36:43+00:00

Extend the perf_pmu_register() interface to allow for named and
dynamic pmu types.

Because we need to support the existing static types we cannot use
dynamic types for everything, hence provide a type argument.

If we want to enumerate the PMUs they need a name, provide one.

Signed-off-by: Peter Zijlstra 
LKML-Reference: <20101117222056.259707703@chello.nl>
Signed-off-by: Ingo Molnar

perf, sparc: Fix CONFIG_PERF_EVENTS=y build error

2010-12-09T23:29:24+00:00

Fix a typo in:

  004417a6d468: perf, arch: Cleanup perf-pmu init vs lockup-detector

Which caused a build failure on Sparc, reported by Stephen Rothwell.

Reported-by: Stephen Rothwell 
Cc: David S. Miller 
Signed-off-by: Peter Zijlstra 
Signed-off-by: Ingo Molnar

perf, arch: Cleanup perf-pmu init vs lockup-detector

2010-11-26T14:14:56+00:00

The perf hardware pmu got initialized at various points in the boot,
some before early_initcall() some after (notably arch_initcall).

The problem is that the NMI lockup detector is ran from early_initcall()
and expects the hardware pmu to be present.

Sanitize this by moving all architecture hardware pmu implementations to
initialize at early_initcall() and move the lockup detector to an explicit
initcall right after that.

Cc: paulus 
Cc: davem 
Cc: Michael Cree 
Cc: Deng-Cheng Zhu 
Acked-by: Paul Mundt 
Acked-by: Will Deacon 
Signed-off-by: Peter Zijlstra 
LKML-Reference: <1290707759.2145.119.camel@laptop>
Signed-off-by: Ingo Molnar

Merge branch 'linus' into perf/core

2010-09-23T06:02:09+00:00

Conflicts:
	arch/sparc/kernel/perf_event.c

Merge reason: Resolve the conflict.

Signed-off-by: Ingo Molnar