Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.3-rc1.

  There's a lot of changes this development cycle, most of the work
  falls into two different categories:

   - fw_devlink fixes and updates. This has gone through numerous review
     cycles and lots of review and testing by lots of different devices.
     Hopefully all should be good now, and Saravana will be keeping a
     watch for any potential regression on odd embedded systems.

   - driver core changes to work to make struct bus_type able to be
     moved into read-only memory (i.e. const) The recent work with Rust
     has pointed out a number of areas in the driver core where we are
     passing around and working with structures that really do not have
     to be dynamic at all, and they should be able to be read-only
     making things safer overall. This is the contuation of that work
     (started last release with kobject changes) in moving struct
     bus_type to be constant. We didn't quite make it for this release,
     but the remaining patches will be finished up for the release after
     this one, but the groundwork has been laid for this effort.

  Other than that we have in here:

   - debugfs memory leak fixes in some subsystems

   - error path cleanups and fixes for some never-able-to-be-hit
     codepaths.

   - cacheinfo rework and fixes

   - Other tiny fixes, full details are in the shortlog

  All of these have been in linux-next for a while with no reported
  problems"

[ Geert Uytterhoeven points out that that last sentence isn't true, and
  that there's a pending report that has a fix that is queued up - Linus ]

* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
  debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
  OPP: fix error checking in opp_migrate_dentry()
  debugfs: update comment of debugfs_rename()
  i3c: fix device.h kernel-doc warnings
  dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
  driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
  Revert "driver core: add error handling for devtmpfs_create_node()"
  Revert "devtmpfs: add debug info to handle()"
  Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
  driver core: cpu: don't hand-override the uevent bus_type callback.
  devtmpfs: remove return value of devtmpfs_delete_node()
  devtmpfs: add debug info to handle()
  driver core: add error handling for devtmpfs_create_node()
  driver core: bus: update my copyright notice
  driver core: bus: add bus_get_dev_root() function
  driver core: bus: constify bus_unregister()
  driver core: bus: constify some internal functions
  driver core: bus: constify bus_get_kset()
  driver core: bus: constify bus_register/unregister_notifier()
  driver core: remove private pointer from struct bus_type
  ...

The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.

Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current arch_cpu_idle() is called with IRQs disabled, but will return
with IRQs enabled.

However, the very first thing the generic code does after calling
arch_cpu_idle() is raw_local_irq_disable(). This means that
architectures that can idle with IRQs disabled end up doing a
pointless 'enable-disable' dance.

Therefore, push this IRQ disabling into the idle function, meaning
that those architectures can avoid the pointless IRQ state flipping.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.618076436@infradead.org

Idle code is very like entry code in that RCU isn't available. As
such, add a little validation.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.373461409@infradead.org

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Link: https://lkml.kernel.org/r/20221014212235.10770-13-s.shtylyov@omp.ru
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull Kbuild updates from Masahiro Yamada:

 - Remove potentially incomplete targets when Kbuid is interrupted by
   SIGINT etc in case GNU Make may miss to do that when stderr is piped
   to another program.

 - Rewrite the single target build so it works more correctly.

 - Fix rpm-pkg builds with V=1.

 - List top-level subdirectories in ./Kbuild.

 - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
   kallsyms.

 - Avoid two different modules in lib/zstd/ having shared code, which
   potentially causes building the common code as build-in and modular
   back-and-forth.

 - Unify two modpost invocations to optimize the build process.

 - Remove head-y syntax in favor of linker scripts for placing
   particular sections in the head of vmlinux.

 - Bump the minimal GNU Make version to 3.82.

 - Clean up misc Makefiles and scripts.

* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
  docs: bump minimal GNU Make version to 3.82
  ia64: simplify esi object addition in Makefile
  Revert "kbuild: Check if linker supports the -X option"
  kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
  kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
  zstd: Fixing mixed module-builtin objects
  kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
  kallsyms: take the input file instead of reading stdin
  kallsyms: drop duplicated ignore patterns from kallsyms.c
  kbuild: reuse mksysmap output for kallsyms
  mksysmap: update comment about __crc_*
  kbuild: remove head-y syntax
  kbuild: use obj-y instead extra-y for objects placed at the head
  kbuild: hide error checker logs for V=1 builds
  kbuild: re-run modpost when it is updated
  kbuild: unify two modpost invocations
  kbuild: move vmlinux.o rule to the top Makefile
  kbuild: move .vmlinux.objs rule to Makefile.modpost
  kbuild: list sub-directories in ./Kbuild
  Makefile.compiler: replace cc-ifversion with compiler-specific macros
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of TTY and Serial driver updates for 6.1-rc1.

  Lots of cleanups in here, no real new functionality this time around,
  with the diffstat being that we removed more lines than we added!

  Included in here are:

   - termios unification cleanups from Al Viro, it's nice to finally get
     this work done

   - tty serial transmit cleanups in various drivers in preparation for
     more cleanup and unification in future releases (that work was not
     ready for this release)

   - n_gsm fixes and updates

   - ktermios cleanups and code reductions

   - dt bindings json conversions and updates for new devices

   - some serial driver updates for new devices

   - lots of other tiny cleanups and janitorial stuff. Full details in
     the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
  serial: cpm_uart: Don't request IRQ too early for console port
  tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
  tty: serial: unify TX space reads under altera_jtaguart_tx_space()
  tty: serial: use FIELD_GET() in lqasc_tx_ready()
  tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
  tty: serial: allow pxa.c to be COMPILE_TESTed
  serial: stm32: Fix unused-variable warning
  tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
  serial: 8250: Fix restoring termios speed after suspend
  serial: Deassert Transmit Enable on probe in driver-specific way
  serial: 8250_dma: Convert to use uart_xmit_advance()
  serial: 8250_omap: Convert to use uart_xmit_advance()
  MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
  serial: stm32: Deassert Transmit Enable on ->rs485_config()
  serial: ar933x: Deassert Transmit Enable on ->rs485_config()
  tty: serial: atmel: Use FIELD_PREP/FIELD_GET
  tty: serial: atmel: Make the driver aware of the existence of GCLK
  tty: serial: atmel: Only divide Clock Divisor if the IP is USART
  tty: serial: atmel: Separate mode clearing between UART and USART
  dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
  ...

Pull kernel hardening updates from Kees Cook:
 "Most of the collected changes here are fixes across the tree for
  various hardening features (details noted below).

  The most notable new feature here is the addition of the memcpy()
  overflow warning (under CONFIG_FORTIFY_SOURCE), which is the next step
  on the path to killing the common class of "trivially detectable"
  buffer overflow conditions (i.e. on arrays with sizes known at compile
  time) that have resulted in many exploitable vulnerabilities over the
  years (e.g. BleedingTooth).

  This feature is expected to still have some undiscovered false
  positives. It's been in -next for a full development cycle and all the
  reported false positives have been fixed in their respective trees.
  All the known-bad code patterns we could find with Coccinelle are also
  either fixed in their respective trees or in flight.

  The commit message in commit 54d9469bc515 ("fortify: Add run-time WARN
  for cross-field memcpy()") for the feature has extensive details, but
  I'll repeat here that this is a warning _only_, and is not intended to
  actually block overflows (yet). The many patches fixing array sizes
  and struct members have been landing for several years now, and we're
  finally able to turn this on to find any remaining stragglers.

  Summary:

  Various fixes across several hardening areas:

   - loadpin: Fix verity target enforcement (Matthias Kaehlcke).

   - zero-call-used-regs: Add missing clobbers in paravirt (Bill
     Wendling).

   - CFI: clean up sparc function pointer type mismatches (Bart Van
     Assche).

   - Clang: Adjust compiler flag detection for various Clang changes
     (Sami Tolvanen, Kees Cook).

   - fortify: Fix warnings in arch-specific code in sh, ARM, and xen.

  Improvements to existing features:

   - testing: improve overflow KUnit test, introduce fortify KUnit test,
     add more coverage to LKDTM tests (Bart Van Assche, Kees Cook).

   - overflow: Relax overflow type checking for wider utility.

  New features:

   - string: Introduce strtomem() and strtomem_pad() to fill a gap in
     strncpy() replacement needs.

   - um: Enable FORTIFY_SOURCE support.

   - fortify: Enable run-time struct member memcpy() overflow warning"

* tag 'hardening-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (27 commits)
  Makefile.extrawarn: Move -Wcast-function-type-strict to W=1
  hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
  sparc: Unbreak the build
  x86/paravirt: add extra clobbers with ZERO_CALL_USED_REGS enabled
  x86/paravirt: clean up typos and grammaros
  fortify: Convert to struct vs member helpers
  fortify: Explicitly check bounds are compile-time constants
  x86/entry: Work around Clang __bdos() bug
  ARM: decompressor: Include .data.rel.ro.local
  fortify: Adjust KUnit test for modular build
  sh: machvec: Use char[] for section boundaries
  kunit/memcpy: Avoid pathological compile-time string size
  lib: Improve the is_signed_type() kunit test
  LoadPin: Require file with verity root digests to have a header
  dm: verity-loadpin: Only trust verity targets with enforcement
  LoadPin: Fix Kconfig doc about format of file with verity digests
  um: Enable FORTIFY_SOURCE
  lkdtm: Update tests for memcpy() run-time warnings
  fortify: Add run-time WARN for cross-field memcpy()
  fortify: Use SIZE_MAX instead of (size_t)-1
  ...

The objects placed at the head of vmlinux need special treatments:

 - arch/$(SRCARCH)/Makefile adds them to head-y in order to place
   them before other archives in the linker command line.

 - arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of
   obj-y to avoid them going into built-in.a.

This commit gets rid of the latter.

Create vmlinux.a to collect all the objects that are unconditionally
linked to vmlinux. The objects listed in head-y are moved to the head
of vmlinux.a by using 'ar m'.

With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y
for builtin objects.

There is no *.o that is directly linked to vmlinux. Drop unneeded code
in scripts/clang-tools/gen_compile_commands.py.

$(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested
by Nathan Chancellor [1].

[1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Fix the following build errors:

arch/sparc/mm/srmmu.c: In function ‘smp_flush_page_for_dma’:
arch/sparc/mm/srmmu.c:1639:13: error: cast between incompatible function types from ‘void (*)(long unsigned int)’ to ‘void (*)(long unsigned int,  long unsigned int,  long unsigned int,  long unsigned int,  long unsigned int)’ [-Werror=cast-function-type]
 1639 |         xc1((smpfunc_t) local_ops->page_for_dma, page);
      |             ^
arch/sparc/mm/srmmu.c: In function ‘smp_flush_cache_mm’:
arch/sparc/mm/srmmu.c:1662:29: error: cast between incompatible function types from ‘void (*)(struct mm_struct *)’ to ‘void (*)(long unsigned int,  long unsigned int,  long unsigned int,  long unsigned int,  long unsigned int)’ [-Werror=cast-function-type]
 1662 |                         xc1((smpfunc_t) local_ops->cache_mm, (unsigned long) mm);
      |
[ ... ]

Compile-tested only.

Fixes: 552a23a0e5d0 ("Makefile: Enable -Wcast-function-type")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220830205854.1918026-1-bvanassche@acm.org