linux-toradex.git/arch/um/include, branch v3.12.6

um: Cleanup SIGTERM handling

2013-09-07T08:56:58+00:00

Richard reported that some UML processes survive if the UML
main process receives a SIGTERM.
This issue was caused by a wrongly placed signal(SIGTERM, SIG_DFL)
in init_new_thread_signals().
It disabled the UML exit handler accidently for some processes.
The correct solution is to disable the fatal handler for all
UML helper threads/processes.
Such that last_ditch_exit() does not get called multiple times
and all processes can exit due to SIGTERM.

Reported-and-tested-by: Richard W.M. Jones 
Signed-off-by: Richard Weinberger

um: ubd: Add REQ_FLUSH suppport

2013-09-07T08:56:49+00:00

UML's block device driver does not support write barriers,
to support this this patch adds REQ_FLUSH suppport.
Every time the block layer sends a REQ_FLUSH we fsync() now
our backing file to guarantee data consistency.

Reported-and-tested-by: Richard W.M. Jones 
Signed-off-by: Richard Weinberger

um: Implement probe_kernel_read()

2013-09-07T08:38:34+00:00

UML needs it's own probe_kernel_read() to handle kernel
mode faults correctly.
The implementation uses mincore() on the host side to detect
whether a page is owned by the UML kernel process.

This fixes also a possible crash when sysrq-t is used.
Starting with 3.10 sysrq-t calls probe_kernel_read() to
read details from the kernel workers. As kernel worker are
completely async pointers may turn NULL while reading them.

Cc: 
Cc: 
Cc:  # 3.10.x
Signed-off-by: Richard Weinberger

Fix TLB gather virtual address range invalidation corner cases

2013-08-16T15:52:46+00:00

Ben Tebulin reported:

 "Since v3.7.2 on two independent machines a very specific Git
  repository fails in 9/10 cases on git-fsck due to an SHA1/memory
  failures.  This only occurs on a very specific repository and can be
  reproduced stably on two independent laptops.  Git mailing list ran
  out of ideas and for me this looks like some very exotic kernel issue"

and bisected the failure to the backport of commit 53a59fc67f97 ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").

That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.

The real bug is that the TLB gather virtual memory range setup is subtly
buggered.  It was introduced in commit 597e1c3580b7 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.

The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB.  And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.

Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.

This makes the patch larger, but conceptually much simpler.  And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.

Ben verified that this fixes his problem.

Reported-bisected-and-tested-by: Ben Tebulin 
Build-testing-by: Stephen Rothwell 
Build-testing-by: Richard Weinberger 
Reviewed-by: Michal Hocko 
Acked-by: Peter Zijlstra 
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds

um: siginfo cleanup

2013-07-19T09:31:36+00:00

Currently we use both struct siginfo and siginfo_t.
Let's use struct siginfo internally to avoid ongoing
compiler warning. We are allowed to do so because
struct siginfo and siginfo_t are equivalent.

Signed-off-by: Richard Weinberger

UML: normalize global variables exported by vmlinux.lds

2013-07-03T23:07:34+00:00

Normalize global variables exported by vmlinux.lds to conform usage
guidelines from include/asm-generic/sections.h.

1) Use _text to mark the start of the kernel image including the head
text, and _stext to mark the start of the .text section.
2) Export mandatory global variables __bss_stop.
3) Adjust __init_begin and __init_end to avoid acrossing .text and
   .data sections.

Signed-off-by: Jiang Liu 
Cc: Jeff Dike 
Cc: Richard Weinberger 
Cc: Al Viro 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

consolidate io_remap_pfn_range definitions

2013-06-29T08:46:35+00:00

Signed-off-by: Al Viro

nohz: Rename CONFIG_NO_HZ to CONFIG_NO_HZ_COMMON

2013-04-03T11:56:03+00:00

We are planning to convert the dynticks Kconfig options layout
into a choice menu. The user must be able to easily pick
any of the following implementations: constant periodic tick,
idle dynticks, full dynticks.

As this implies a mutual exclusion, the two dynticks implementions
need to converge on the selection of a common Kconfig option in order
to ease the sharing of a common infrastructure.

It would thus seem pretty natural to reuse CONFIG_NO_HZ to
that end. It already implements all the idle dynticks code
and the full dynticks depends on all that code for now.
So ideally the choice menu would propose CONFIG_NO_HZ_IDLE and
CONFIG_NO_HZ_EXTENDED then both would select CONFIG_NO_HZ.

On the other hand we want to stay backward compatible: if
CONFIG_NO_HZ is set in an older config file, we want to
enable CONFIG_NO_HZ_IDLE by default.

But we can't afford both at the same time or we run into
a circular dependency:

1) CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED both select
   CONFIG_NO_HZ
2) If CONFIG_NO_HZ is set, we default to CONFIG_NO_HZ_IDLE

We might be able to support that from Kconfig/Kbuild but it
may not be wise to introduce such a confusing behaviour.

So to solve this, create a new CONFIG_NO_HZ_COMMON option
which gathers the common code between idle and full dynticks
(that common code for now is simply the idle dynticks code)
and select it from their referring Kconfig.

Then we'll later create CONFIG_NO_HZ_IDLE and map CONFIG_NO_HZ
to it for backward compatibility.

Signed-off-by: Frederic Weisbecker 
Cc: Andrew Morton 
Cc: Chris Metcalf 
Cc: Christoph Lameter 
Cc: Geoff Levand 
Cc: Gilad Ben Yossef 
Cc: Hakan Akkan 
Cc: Ingo Molnar 
Cc: Kevin Hilman 
Cc: Li Zhong 
Cc: Namhyung Kim 
Cc: Paul E. McKenney 
Cc: Paul Gortmaker 
Cc: Peter Zijlstra 
Cc: Steven Rostedt 
Cc: Thomas Gleixner

um: net: use eth_hw_addr_random() to generate random mac

2013-01-04T06:37:36+00:00

Also remove unused "mac" from uml_net struct.

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

tracing,x86: Add a TSC trace_clock

2012-11-13T20:48:27+00:00

In order to promote interoperability between userspace tracers and ftrace,
add a trace_clock that reports raw TSC values which will then be recorded
in the ring buffer. Userspace tracers that also record TSCs are then on
exactly the same time base as the kernel and events can be unambiguously
interlaced.

Tested: Enabled a tracepoint and the "tsc" trace_clock and saw very large
timestamp values.

v2:
Move arch-specific bits out of generic code.
v3:
Rename "x86-tsc", cleanups
v7:
Generic arch bits in Kbuild.

Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1352837903-32191-1-git-send-email-dhsharp@google.com

Acked-by: Ingo Molnar 
Cc: Masami Hiramatsu 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Signed-off-by: David Sharp 
Signed-off-by: Steven Rostedt