* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (93 commits)
  x86, tlb, UV: Do small micro-optimization for native_flush_tlb_others()
  x86-64, NUMA: Don't call numa_set_distanc() for all possible node combinations during emulation
  x86-64, NUMA: Don't assume phys node 0 is always online in numa_emulation()
  x86-64, NUMA: Clean up initmem_init()
  x86-64, NUMA: Fix numa_emulation code with node0 without RAM
  x86-64, NUMA: Revert NUMA affine page table allocation
  x86: Work around old gas bug
  x86-64, NUMA: Better explain numa_distance handling
  x86-64, NUMA: Fix distance table handling
  mm: Move early_node_map[] reverse scan helpers under HAVE_MEMBLOCK
  x86-64, NUMA: Fix size of numa_distance array
  x86: Rename e820_table_* to pgt_buf_*
  bootmem: Move __alloc_memory_core_early() to nobootmem.c
  bootmem: Move contig_page_data definition to bootmem.c/nobootmem.c
  bootmem: Separate out CONFIG_NO_BOOTMEM code into nobootmem.c
  x86-64, NUMA: Seperate out numa_alloc_distance() from numa_set_distance()
  x86-64, NUMA: Add proper function comments to global functions
  x86-64, NUMA: Move NUMA emulation into numa_emulation.c
  x86-64, NUMA: Prepare numa_emulation() for moving NUMA emulation into a separate file
  x86-64, NUMA: Do not scan two times for setup_node_bootmem()
  ...

Fix up conflicts in arch/x86/kernel/smpboot.c

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix and clean up generic_processor_info()
  x86: Don't copy per_cpu cpuinfo for BSP two times
  x86: Move llc_shared_map out of cpu_info

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1299119690-13991-5-git-send-email-ming.m.lin@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: Merge latest fixes before applying new patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: pick up the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Since checkin ebba638ae723d8a8fc2f7abce5ec18b688b791d7 we call
verify_cpu even in 32-bit mode.  Unfortunately, calling a function
means using the stack, and the stack pointer was not initialized in
the 32-bit setup code!  This code initializes the stack pointer, and
simplifies the interface slightly since it is easier to rely on just a
pointer value rather than a descriptor; we need to have different
values for the segment register anyway.

This retains start_stack as a virtual address, even though a physical
address would be more convenient for 32 bits; the 64-bit code wants
the other way around...

Reported-by: Matthieu Castet <castet.matthieu@free.fr>
LKML-Reference: <4D41E86D.8060205@free.fr>
Tested-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Commit 4c321ff8 (x86: Replace cpu_2_logical_apicid[] with early
percpu variable) and following changes introduced and used
x86_cpu_to_logical_apicid percpu variable.  It was declared and
defined inside CONFIG_SMP && CONFIG_X86_32 but if
CONFIG_X86_UP_APIC is set UP configuration makes use of it and
build fails.

Fix it by declaring and defining it inside CONFIG_X86_LOCAL_APIC
&& CONFIG_X86_32.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: penberg@kernel.org
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <20110128162248.GA25746@htj.dyndns.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Unlike x86_64, on x86_32, the mapping from cpu to logical apicid
may vary depending on apic in use.  cpu_2_logical_apicid[] array
is used for this mapping.  Replace it with early percpu variable
x86_cpu_to_logical_apicid to make it better aligned with other
mappings.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: penberg@kernel.org
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-5-git-send-email-tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

cpu_info is already with per_cpu, We can take llc_shared_map out
of cpu_info, and declare it as per_cpu variable directly.

So later referencing could be simple and directly instead of
diving to find cpu_info at first.

Also could make smp_store_cpu_info() much simple to avoid to do
save and restore trick.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
Cc: Alok N Kataria <akataria@vmware.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Hans J. Koch <hjk@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <4D3A16E8.5020608@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86 smp_ops now has a new op, stop_other_cpus which takes a parameter
"wait" this allows the caller to specify if it wants to stop until all
the cpus have processed the stop IPI.  This is required specifically
for the kexec case where we should wait for all the cpus to be stopped
before starting the new kernel.  We now wait for the cpus to stop in
all cases except for panic/kdump where we expect things to be broken
and we are doing our best to make things work anyway.

This patch fixes a legitimate regression, which was introduced during
2.6.30, by commit id 4ef702c10b5df18ab04921fc252c26421d4d6c75.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
LKML-Reference: <1286833028.1372.20.camel@ank32.eng.vmware.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: <stable@kernel.org> v2.6.30-36
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>