linux-toradex.git/arch/x86/kernel/apm_32.c, branch v4.2.7

cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic

2014-11-12T20:17:27+00:00

The only place where the time is invalid is when the ACPI_CSTATE_FFH entry
method is not set. Otherwise for all the drivers, the time can be correctly
measured.

Instead of duplicating the CPUIDLE_FLAG_TIME_VALID flag in all the drivers
for all the states, just invert the logic by replacing it by the flag
CPUIDLE_FLAG_TIME_INVALID, hence we can set this flag only for the acpi idle
driver, remove the former flag from all the drivers and invert the logic with
this flag in the different governor.

Signed-off-by: Daniel Lezcano 
Signed-off-by: Rafael J. Wysocki

x86: Remove unused variable "polling"

2014-07-16T10:58:47+00:00

Compile tested. "polling" is unused since commit f80c5b39b80a
("sched/idle, x86: Switch from TS_POLLING to TIF_POLLING_NRFLAG").

Signed-off-by: Paul Bolle 
Signed-off-by: Peter Zijlstra 
Cc: Jiri Kosina 
Link: http://lkml.kernel.org/r/1404138749.2978.6.camel@x41
Signed-off-by: Ingo Molnar

sched/idle, x86: Switch from TS_POLLING to TIF_POLLING_NRFLAG

2014-05-08T07:16:56+00:00

Standardize the idle polling indicator to TIF_POLLING_NRFLAG such that
both TIF_NEED_RESCHED and TIF_POLLING_NRFLAG are in the same word.
This will allow us, using fetch_or(), to both set NEED_RESCHED and
check for POLLING_NRFLAG in a single operation and avoid pointless
wakeups.

Changing from the non-atomic thread_info::status flags to the atomic
thread_info::flags shouldn't be a big issue since most polling state
changes were followed/preceded by a full memory barrier anyway.

Also, fix up the apm_32 idle function, clearly that was forgotten in
the last conversion. The default idle state is !POLLING so just kill
the lot.

Signed-off-by: Peter Zijlstra 
Cc: Andy Lutomirski 
Cc: Jiri Kosina 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Steven Rostedt 
Link: http://lkml.kernel.org/n/tip-7yksmqtlv4nfowmlqr1rifoi@git.kernel.org
Signed-off-by: Ingo Molnar

x86, asmlinkage, apm: Make APM data structure used from assembler visible

2013-08-06T21:20:20+00:00

Signed-off-by: Andi Kleen 
Link: http://lkml.kernel.org/r/1375740170-7446-12-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin

cpuidle: remove en_core_tk_irqen flag

2013-04-23T11:45:22+00:00

The en_core_tk_irqen flag is set in all the cpuidle driver which
means it is not necessary to specify this flag.

Remove the flag and the code related to it.

Signed-off-by: Daniel Lezcano 
Acked-by: Kevin Hilman   # for mach-omap2/*
Signed-off-by: Rafael J. Wysocki

Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2013-02-20T19:26:56+00:00

Pull ACPI and power management updates from Rafael Wysocki:

 - Rework of the ACPI namespace scanning code from Rafael J.  Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.

 - ACPI power resources handling and ACPI device PM update from Rafael
   J Wysocki.

 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
   contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.

 - Support for Intel Lynxpoint LPSS from Mika Westerberg.

 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.

 - cpuidle fixes and cleanups from Daniel Lezcano.

 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
   contributions from Stratos Karafotis and Rickard Andersson.

 - Intel P-states driver for Sandy Bridge processors from Dirk
   Brandewie.

 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.

 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.

 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.

 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.

 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.

 - Support for "lightweight suspend" from Zhang Rui.

 - Removal of the deprecated power trace API from Paul Gortmaker.

 - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
   Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
   Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
   Ishimatsu.

* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
  PM idle: remove global declaration of pm_idle
  unicore32 idle: delete stray pm_idle comment
  openrisc idle: delete pm_idle
  mn10300 idle: delete pm_idle
  microblaze idle: delete pm_idle
  m32r idle: delete pm_idle, and other dead idle code
  ia64 idle: delete pm_idle
  cris idle: delete idle and pm_idle
  ARM64 idle: delete pm_idle
  ARM idle: delete pm_idle
  blackfin idle: delete pm_idle
  sparc idle: rename pm_idle to sparc_idle
  sh idle: rename global pm_idle to static sh_idle
  x86 idle: rename global pm_idle to static x86_idle
  APM idle: register apm_cpu_idle via cpuidle
  cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
  cpufreq / intel_pstate: Change to disallow module build
  tools/power turbostat: display SMI count by default
  intel_idle: export both C1 and C1E
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ...

APM idle: register apm_cpu_idle via cpuidle

2013-02-18T04:34:46+00:00

Update APM to register its local idle routine with cpuidle.

This allows us to stop exporting pm_idle to modules on x86.

The Kconfig sub-option, APM_CPU_IDLE, now depends on on CPU_IDLE.

Compile-tested only.

Signed-off-by: Len Brown 
Reviewed-by: Daniel Lezcano 
Cc: Jiri Kosina

cputime: Use accessors to read task cputime stats

2013-01-27T18:23:31+00:00

This is in preparation for the full dynticks feature. While
remotely reading the cputime of a task running in a full
dynticks CPU, we'll need to do some extra-computation. This
way we can account the time it spent tickless in userspace
since its last cputime snapshot.

Signed-off-by: Frederic Weisbecker 
Cc: Andrew Morton 
Cc: Ingo Molnar 
Cc: Li Zhong 
Cc: Namhyung Kim 
Cc: Paul E. McKenney 
Cc: Paul Gortmaker 
Cc: Peter Zijlstra 
Cc: Steven Rostedt 
Cc: Thomas Gleixner

x86/debug: Add KERN_ to bare printks, convert printks to pr_

2012-06-06T07:17:22+00:00

Use a more current logging style:

 - Bare printks should have a KERN_ for consistency's sake
 - Add pr_fmt where appropriate
 - Neaten some macro definitions
 - Convert some Ok output to OK
 - Use "%s: ", __func__ in pr_fmt for summit
 - Convert some printks to pr_

Message output is not identical in all cases.

Signed-off-by: Joe Perches 
Cc: levinsasha928@gmail.com
Link: http://lkml.kernel.org/r/1337655007.24226.10.camel@joe2Laptop
[ merged two similar patches, tidied up the changelog ]
Signed-off-by: Ingo Molnar

x86: Use kick_all_cpus_sync()

2012-05-08T10:35:06+00:00

Use kick_all_cpus_sync() and remove cpu_idle_wait().

Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20120507175652.190382227@linutronix.de
Cc: x86@kernel.org