linux-toradex.git/arch/x86/kernel/asm-offsets_32.c, branch v4.15

x86/entry: Rename SYSENTER_stack to CPU_ENTRY_AREA_entry_stack

2017-12-22T19:13:02+00:00

If the kernel oopses while on the trampoline stack, it will print
"" even if SYSENTER is not involved.  That is rather confusing.

The "SYSENTER" stack is used for a lot more than SYSENTER now.  Give it a
better string to display in stack dumps, and rename the kernel code to
match.

Also move the 32-bit code over to the new naming even though it still uses
the entry stack only for SYSENTER.

Signed-off-by: Dave Hansen 
Signed-off-by: Thomas Gleixner 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Juergen Gross 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Signed-off-by: Ingo Molnar

x86/entry/64: Make cpu_entry_area.tss read-only

2017-12-17T13:27:52+00:00

The TSS is a fairly juicy target for exploits, and, now that the TSS
is in the cpu_entry_area, it's no longer protected by kASLR.  Make it
read-only on x86_64.

On x86_32, it can't be RO because it's written by the CPU during task
switches, and we use a task gate for double faults.  I'd also be
nervous about errata if we tried to make it RO even on configurations
without double fault handling.

[ tglx: AMD confirmed that there is no problem on 64-bit with TSS RO.  So
  	it's probably safe to assume that it's a non issue, though Intel
  	might have been creative in that area. Still waiting for
  	confirmation. ]

Signed-off-by: Andy Lutomirski 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Borislav Petkov 
Cc: Boris Ostrovsky 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Hansen 
Cc: Dave Hansen 
Cc: David Laight 
Cc: Denys Vlasenko 
Cc: Eduardo Valentin 
Cc: Greg KH 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Juergen Gross 
Cc: Kees Cook 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Cc: Will Deacon 
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Link: https://lkml.kernel.org/r/20171204150606.733700132@linutronix.de
Signed-off-by: Ingo Molnar

x86/entry/64: Allocate and enable the SYSENTER stack

2017-12-17T12:59:53+00:00

This will simplify future changes that want scratch variables early in
the SYSENTER handler -- they'll be able to spill registers to the
stack.  It also lets us get rid of a SWAPGS_UNSAFE_STACK user.

This does not depend on CONFIG_IA32_EMULATION=y because we'll want the
stack space even without IA32 emulation.

As far as I can tell, the reason that this wasn't done from day 1 is
that we use IST for #DB and #BP, which is IMO rather nasty and causes
a lot more problems than it solves.  But, since #DB uses IST, we don't
actually need a real stack for SYSENTER (because SYSENTER with TF set
will invoke #DB on the IST stack rather than the SYSENTER stack).

I want to remove IST usage from these vectors some day, and this patch
is a prerequisite for that as well.

Signed-off-by: Andy Lutomirski 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Thomas Gleixner 
Reviewed-by: Borislav Petkov 
Cc: Boris Ostrovsky 
Cc: Borislav Petkov 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Hansen 
Cc: Dave Hansen 
Cc: David Laight 
Cc: Denys Vlasenko 
Cc: Eduardo Valentin 
Cc: Greg KH 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Juergen Gross 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Cc: Will Deacon 
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Link: https://lkml.kernel.org/r/20171204150605.312726423@linutronix.de
Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

x86/lguest: Remove lguest support

2017-08-24T07:57:28+00:00

Lguest seems to be rather unused these days. It has seen only patches
ensuring it still builds the last two years and its official state is
"Odd Fixes".

Remove it in order to be able to clean up the paravirt code.

Signed-off-by: Juergen Gross 
Acked-by: Rusty Russell 
Acked-by: Thomas Gleixner 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: boris.ostrovsky@oracle.com
Cc: lguest@lists.ozlabs.org
Cc: rusty@rustcorp.com.au
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com
Signed-off-by: Ingo Molnar

sched/x86: Rewrite the switch_to() code

2016-08-24T10:31:41+00:00

Move the low-level context switch code to an out-of-line asm stub instead of
using complex inline asm.  This allows constructing a new stack frame for the
child process to make it seamlessly flow to ret_from_fork without an extra
test and branch in __switch_to().  It also improves code generation for
__schedule() by using the C calling convention instead of clobbering all
registers.

Signed-off-by: Brian Gerst 
Reviewed-by: Josh Poimboeuf 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1471106302-10159-5-git-send-email-brgerst@gmail.com
Signed-off-by: Ingo Molnar

x86/entry/32: Simplify and fix up the SYSENTER stack #DB/NMI fixup

2016-03-10T08:48:14+00:00

Right after SYSENTER, we can get a #DB or NMI.  On x86_32, there's no IST,
so the exception handler is invoked on the temporary SYSENTER stack.

Because the SYSENTER stack is very small, we have a fixup to switch
off the stack quickly when this happens.  The old fixup had several issues:

 1. It checked the interrupt frame's CS and EIP.  This wasn't
    obviously correct on Xen or if vm86 mode was in use [1].

 2. In the NMI handler, it did some frightening digging into the
    stack frame.  I'm not convinced this digging was correct.

 3. The fixup didn't switch stacks and then switch back.  Instead, it
    synthesized a brand new stack frame that would redirect the IRET
    back to the SYSENTER code.  That frame was highly questionable.
    For one thing, if NMI nested inside #DB, we would effectively
    abort the #DB prologue, which was probably safe but was
    frightening.  For another, the code used PUSHFL to write the
    FLAGS portion of the frame, which was simply bogus -- by the time
    PUSHFL was called, at least TF, NT, VM, and all of the arithmetic
    flags were clobbered.

Simplify this considerably.  Instead of looking at the saved frame
to see where we came from, check the hardware ESP register against
the SYSENTER stack directly.  Malicious user code cannot spoof the
kernel ESP register, and by moving the check after SAVE_ALL, we can
use normal PER_CPU accesses to find all the relevant addresses.

With this patch applied, the improved syscall_nt_32 test finally
passes on 32-bit kernels.

[1] It isn't obviously correct, but it is nonetheless safe from vm86
    shenanigans as far as I can tell.  A user can't point EIP at
    entry_SYSENTER_32 while in vm86 mode because entry_SYSENTER_32,
    like all kernel addresses, is greater than 0xffff and would thus
    violate the CS segment limit.

Signed-off-by: Andy Lutomirski 
Cc: Andrew Cooper 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/b2cdbc037031c07ecf2c40a96069318aec0e7971.1457578375.git.luto@kernel.org
Signed-off-by: Ingo Molnar

x86/syscalls: Add syscall entry qualifiers

2016-01-29T08:46:38+00:00

This will let us specify something like 'sys_xyz/foo' instead of
'sys_xyz' in the syscall table, where the 'foo' qualifier conveys
some extra information to the C code.

The intent is to allow things like sys_execve/ptregs to indicate
that sys_execve() touches pt_regs.

Signed-off-by: Andy Lutomirski 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: Frederic Weisbecker 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/2de06e33dce62556b3ec662006fcb295504e296e.1454022279.git.luto@kernel.org
Signed-off-by: Ingo Molnar

x86/syscalls: Move compat syscall entry handling into syscalltbl.sh

2016-01-29T08:46:37+00:00

Rather than duplicating the compat entry handling in all
consumers of syscalls_BITS.h, handle it directly in
syscalltbl.sh.  Now we generate entries in syscalls_32.h like:

__SYSCALL_I386(5, sys_open)
__SYSCALL_I386(5, compat_sys_open)

and all of its consumers implicitly get the right entry point.

Signed-off-by: Andy Lutomirski 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: Frederic Weisbecker 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/b7c2b501dc0e6e43050e916b95807c3e2e16e9bb.1454022279.git.luto@kernel.org
Signed-off-by: Ingo Molnar

x86: Remove unused TI_cpu

2015-05-05T18:48:02+00:00

Signed-off-by: Brian Gerst 
Cc: Denys Vlasenko 
Acked-by: Andy Lutomirski 
Link: http://lkml.kernel.org/r/1428844486-6638-2-git-send-email-brgerst@gmail.com
Signed-off-by: Thomas Gleixner