linux-toradex.git/arch/x86/kernel/setup.c, branch v4.4.85

x86/mm/pat: Don't report PAT on CPUs that don't support it

2017-07-15T09:57:50+00:00

commit 99c13b8c8896d7bcb92753bf0c63a8de4326e78d upstream.

The pat_enabled() logic is broken on CPUs which do not support PAT and
where the initialization code fails to call pat_init(). Due to that the
enabled flag stays true and pat_enabled() returns true wrongfully.

As a consequence the mappings, e.g. for Xorg, are set up with the wrong
caching mode and the required MTRR setups are omitted.

To cure this the following changes are required:

  1) Make pat_enabled() return true only if PAT initialization was
     invoked and successful.

  2) Invoke init_cache_modes() unconditionally in setup_arch() and
     remove the extra callsites in pat_disable() and the pat disabled
     code path in pat_init().

Also rename __pat_enabled to pat_disabled to reflect the real purpose of
this variable.

Fixes: 9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled")
Signed-off-by: Mikulas Patocka 
Signed-off-by: Thomas Gleixner 
Cc: Bernhard Held 
Cc: Denys Vlasenko 
Cc: Peter Zijlstra 
Cc: Brian Gerst 
Cc: "Luis R. Rodriguez" 
Cc: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Josh Poimboeuf 
Cc: Andrew Morton 
Cc: Linus Torvalds 
Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1707041749300.3456@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Greg Kroah-Hartman

x86/microcode: Initialize the driver late when facilities are up

2015-11-23T09:39:49+00:00

Running microcode_init() from setup_arch() is a bad idea because
not even kmalloc() is ready at that point and the loader does
all kinds of allocations and init/registration with various
subsystems.

Make it a late initcall when required facilities are initialized
so that the microcode driver initialization can succeed too.

Reported-and-tested-by: Markus Trippelsdorf 
Signed-off-by: Borislav Petkov 
Cc: Andrew Morton 
Cc: Linus Torvalds 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20151120112400.GC4028@pd.tnic
Signed-off-by: Ingo Molnar

x86/setup: Fix low identity map for >= 2GB kernel range

2015-11-07T09:39:40+00:00

The commit f5f3497cad8c extended the low identity mapping. However, if
the kernel uses more than 2 GB (VMSPLIT_2G_OPT or VMSPLIT_1G memory
split), the normal memory mapping is overwritten by the low identity
mapping causing a crash. To avoid overwritting, limit the low identity
map to cover only memory before kernel range (PAGE_OFFSET).

Fixes: f5f3497cad8c "x86/setup: Extend low identity map to cover whole kernel range
Signed-off-by: Krzysztof Mazur 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Laszlo Ersek 
Cc: Matt Fleming 
Cc: Paolo Bonzini 
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1446815916-22105-1-git-send-email-krzysiek@podlesie.net
Signed-off-by: Thomas Gleixner

Merge branch 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-11-04T01:51:33+00:00

Pull RAS changes from Ingo Molnar:
 "The main system reliability related changes were from x86, but also
  some generic RAS changes:

   - AMD MCE error injection subsystem enhancements.  (Aravind
     Gopalakrishnan)

   - Fix MCE and CPU hotplug interaction bug.  (Ashok Raj)

   - kcrash bootup robustness fix.  (Baoquan He)

   - kcrash cleanups.  (Borislav Petkov)

   - x86 microcode driver rework: simplify it by unmodularizing it and
     other cleanups.  (Borislav Petkov)"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/mce: Add a default case to the switch in __mcheck_cpu_ancient_init()
  x86/mce: Add a Scalable MCA vendor flags bit
  MAINTAINERS: Unify the microcode driver section
  x86/microcode/intel: Move #ifdef DEBUG inside the function
  x86/microcode/amd: Remove maintainers from comments
  x86/microcode: Remove modularization leftovers
  x86/microcode: Merge the early microcode loader
  x86/microcode: Unmodularize the microcode driver
  x86/mce: Fix thermal throttling reporting after kexec
  kexec/crash: Say which char is the unrecognized
  x86/setup/crash: Check memblock_reserve() retval
  x86/setup/crash: Cleanup some more
  x86/setup/crash: Remove alignment variable
  x86/setup: Cleanup crashkernel reservation functions
  x86/amd_nb, EDAC: Rename amd_get_node_id()
  x86/setup: Do not reserve crashkernel high memory if low reservation failed
  x86/microcode/amd: Do not overwrite final patch levels
  x86/microcode/amd: Extract current patch level read to a function
  x86/ras/mce_amd_inj: Inject bank 4 errors on the NBC
  x86/ras/mce_amd_inj: Trigger deferred and thresholding errors interrupts
  ...

Merge branch 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-11-03T23:05:52+00:00

Pull EFI changes from Ingo Molnar:
 "The main changes in this cycle were:

   - further EFI code generalization to make it more workable for ARM64
   - various extensions, such as 64-bit framebuffer address support,
     UEFI v2.5 EFI_PROPERTIES_TABLE support
   - code modularization simplifications and cleanups
   - new debugging parameters
   - various fixes and smaller additions"

* 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  efi: Fix warning of int-to-pointer-cast on x86 32-bit builds
  efi: Use correct type for struct efi_memory_map::phys_map
  x86/efi: Fix kernel panic when CONFIG_DEBUG_VIRTUAL is enabled
  efi: Add "efi_fake_mem" boot option
  x86/efi: Rename print_efi_memmap() to efi_print_memmap()
  efi: Auto-load the efi-pstore module
  efi: Introduce EFI_NX_PE_DATA bit and set it from properties table
  efi: Add support for UEFIv2.5 Properties table
  efi: Add EFI_MEMORY_MORE_RELIABLE support to efi_md_typeattr_format()
  efifb: Add support for 64-bit frame buffer addresses
  efi/arm64: Clean up efi_get_fdt_params() interface
  arm64: Use core efi=debug instead of uefi_debug command line parameter
  efi/x86: Move efi=debug option parsing to core
  drivers/firmware: Make efi/esrt.c driver explicitly non-modular
  efi: Use the generic efi.memmap instead of 'memmap'
  acpi/apei: Use appropriate pgprot_t to map GHES memory
  arm64, acpi/apei: Implement arch_apei_get_mem_attributes()
  arm64/mm: Add PROT_DEVICE_nGnRnE and PROT_NORMAL_WT
  acpi, x86: Implement arch_apei_get_mem_attributes()
  efi, x86: Rearrange efi_mem_attributes()
  ...

x86/microcode: Unmodularize the microcode driver

2015-10-21T09:22:11+00:00

Make CONFIG_MICROCODE a bool. It was practically a bool already anyway,
since early loader was forcing it to =y.

Regardless, there's no real reason to have something be a module which
gets built-in on the majority of installations out there. And its not
like there's noticeable change in functionality - we still can load late
microcode - just the module glue disappears.

Signed-off-by: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Arjan van de Ven 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Jones 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Len Brown 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Rafael J. Wysocki 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Link: http://lkml.kernel.org/r/1445334889-300-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/setup/crash: Check memblock_reserve() retval

2015-10-21T09:10:56+00:00

memblock_reserve() can fail but the crashkernel reservation code
doesn't check that and this can lead the user into believing
that the crashkernel region was actually reserved. Make sure we
check that return value and we exit early with a failure message
in the error case.

Signed-off-by: Borislav Petkov 
Reviewed-by: Dave Young 
Reviewed-by: Joerg Roedel 
Cc: Andrew Morton 
Cc: Andy Lutomirski 
Cc: H. Peter Anvin 
Cc: Jiri Kosina 
Cc: Juergen Gross 
Cc: Linus Torvalds 
Cc: Mark Salter 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: WANG Chao 
Cc: jerry_hoemann@hp.com
Link: http://lkml.kernel.org/r/1445246268-26285-7-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/setup/crash: Cleanup some more

2015-10-21T09:10:56+00:00

* Remove unused auto_set variable
* Cleanup local function variable declarations
* Reformat printk string and use pr_info()

No functionality change.

Signed-off-by: Borislav Petkov 
Reviewed-by: Dave Young 
Reviewed-by: Joerg Roedel 
Cc: Andrew Morton 
Cc: Andy Lutomirski 
Cc: H. Peter Anvin 
Cc: Jiri Kosina 
Cc: Juergen Gross 
Cc: Linus Torvalds 
Cc: Mark Salter 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: WANG Chao 
Cc: jerry_hoemann@hp.com
Link: http://lkml.kernel.org/r/1445246268-26285-6-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/setup/crash: Remove alignment variable

2015-10-21T09:10:56+00:00

Use a macro instead. No functionality change.

Signed-off-by: Borislav Petkov 
Reviewed-by: Dave Young 
Reviewed-by: Joerg Roedel 
Cc: Andrew Morton 
Cc: Andy Lutomirski 
Cc: H. Peter Anvin 
Cc: Jiri Kosina 
Cc: Juergen Gross 
Cc: Linus Torvalds 
Cc: Mark Salter 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: WANG Chao 
Cc: jerry_hoemann@hp.com
Link: http://lkml.kernel.org/r/1445246268-26285-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/setup: Cleanup crashkernel reservation functions

2015-10-21T09:10:56+00:00

* Shorten variable names
* Realign code, space out for better readability

No code changed:

  # arch/x86/kernel/setup.o:

   text    data     bss     dec     hex filename
   4543    3096   69904   77543   12ee7 setup.o.before
   4543    3096   69904   77543   12ee7 setup.o.after

md5:
   8a1b7c6738a553ca207b56bd84a8f359  setup.o.before.asm
   8a1b7c6738a553ca207b56bd84a8f359  setup.o.after.asm

Signed-off-by: Borislav Petkov 
Reviewed-by: Dave Young 
Reviewed-by: Joerg Roedel 
Cc: Andrew Morton 
Cc: Andy Lutomirski 
Cc: H. Peter Anvin 
Cc: Jiri Kosina 
Cc: Juergen Gross 
Cc: Linus Torvalds 
Cc: Mark Salter 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: WANG Chao 
Cc: jerry_hoemann@hp.com
Link: http://lkml.kernel.org/r/1445246268-26285-4-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar