linux-toradex.git/arch/x86/kernel, branch v3.0.13

perf/x86: Fix PEBS instruction unwind

2011-12-09T16:52:44+00:00

commit 57d1c0c03c6b48b2b96870d831b9ce6b917f53ac upstream.

Masami spotted that we always try to decode the instruction stream as
64bit instructions when running a 64bit kernel, this doesn't work for
ia32-compat proglets.

Use TIF_IA32 to detect if we need to use the 32bit instruction
decoder.

Reported-by: Masami Hiramatsu 
Signed-off-by: Peter Zijlstra 
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

x86: Fix "Acer Aspire 1" reboot hang

2011-12-09T16:52:43+00:00

commit 1ef03890969932e9359b9a4c658f7f87771910ac upstream.

Looks like on some Acer Aspire 1s with older bioses, reboot via bios
fails.  It works on my machine, (with BIOS version 0.3310) but
not on some others (BIOS version 0.3309).

There's a log of problems at:

  https://bbs.archlinux.org/viewtopic.php?id=124136

This patch adds a different callback to the reboot quirk table,
to allow rebooting via keybaord controller.

Reported-by: Uroš Vampl 
Tested-by: Vasily Khoruzhick 
Signed-off-by: Peter Chubb 
Cc: Don Zickus 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1323093233-9481-1-git-send-email-anarsoul@gmail.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

x86/mpparse: Account for bus types other than ISA and PCI

2011-12-09T16:52:43+00:00

commit 9e6866686bdf2dcf3aeb0838076237ede532dcc8 upstream.

In commit f8924e770e04 ("x86: unify mp_bus_info"), the 32-bit
and 64-bit versions of MP_bus_info were rearranged to match each
other better.  Unfortunately it introduced a regression: prior
to that change we used to always set the mp_bus_not_pci bit,
then clear it if we found a PCI bus.  After it, we set
mp_bus_not_pci for ISA buses, clear it for PCI buses, and leave
it alone otherwise.

In the cases of ISA and PCI, there's not much difference.  But
ISA is not the only non-PCI bus, so it's better to always set
mp_bus_not_pci and clear it only for PCI.

Without this change, Dan's Dell PowerEdge 4200 panics on boot
with a log indicating interrupt routing trouble unless the
"noapic" option is supplied.  With this change, the machine
boots reliably without "noapic".

Fixes http://bugs.debian.org/586494

Reported-bisected-and-tested-by: Dan McGrath 
Signed-off-by: Bjorn Helgaas 
Cc: Dan McGrath 
Cc: Alexey Starikovskiy 
[jrnieder@gmail.com: clarified commit message]
Signed-off-by: Jonathan Nieder 
Link: http://lkml.kernel.org/r/20111122215000.GA9151@elie.hsd1.il.comcast.net
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

iommu/amd: Fix wrong shift direction

2011-11-11T17:36:09+00:00

commit fcd0861db1cf4e6ed99f60a815b7b72c2ed36ea4 upstream.

The shift direction was wrong because the function takes a
page number and i is the address is the loop.

Signed-off-by: Joerg Roedel 
Signed-off-by: Greg Kroah-Hartman

apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches

2011-11-11T17:35:52+00:00

commit 838312be46f3abfbdc175f81c3e54a857994476d upstream.

These warnings (generally one per CPU) are a result of
initializing x86_cpu_to_logical_apicid while apic_default is
still in use, but the check in setup_local_APIC() being done
when apic_bigsmp was already used as an override in
default_setup_apic_routing():

 Overriding APIC driver with bigsmp
 Enabling APIC mode:  Physflat.  Using 5 I/O APICs
 ------------[ cut here ]------------
 WARNING: at .../arch/x86/kernel/apic/apic.c:1239
 ...
 CPU 1 irqstacks, hard=f1c9a000 soft=f1c9c000
 Booting Node   0, Processors  #1
 smpboot cpu 1: start_ip = 9e000
 Initializing CPU#1
 ------------[ cut here ]------------
 WARNING: at .../arch/x86/kernel/apic/apic.c:1239
 setup_local_APIC+0x137/0x46b() Hardware name: ...
 CPU1 logical APIC ID: 2 != 8
 ...

Fix this (for the time being, i.e. until
x86_32_early_logical_apicid() will get removed again, as Tejun
says ought to be possible) by overriding the previously stored
values at the point where the APIC driver gets overridden.

v2: Move this and the pre-existing override logic into
    arch/x86/kernel/apic/bigsmp_32.c.

Signed-off-by: Jan Beulich 
Acked-by: Tejun Heo 
Link: http://lkml.kernel.org/r/4E835D16020000780005844C@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

x86: Fix compilation bug in kprobes' twobyte_is_boostable

2011-11-11T17:35:27+00:00

commit 315eb8a2a1b7f335d40ceeeb11b9e067475eb881 upstream.

When compiling an i386_defconfig kernel with gcc-4.6.1-9.fc15.i686, I
noticed a warning about the asm operand for test_bit in kprobes'
can_boost.  I discovered that this caused only the first long of
twobyte_is_boostable[] to be output.

Jakub filed and fixed gcc PR50571 to correct the warning and this output
issue.  But to solve it for less current gcc, we can make kprobes'
twobyte_is_boostable[] non-const, and it won't be optimized out.

Before:

    CC      arch/x86/kernel/kprobes.o
  In file included from include/linux/bitops.h:22:0,
                   from include/linux/kernel.h:17,
                   from [...]/arch/x86/include/asm/percpu.h:44,
                   from [...]/arch/x86/include/asm/current.h:5,
                   from [...]/arch/x86/include/asm/processor.h:15,
                   from [...]/arch/x86/include/asm/atomic.h:6,
                   from include/linux/atomic.h:4,
                   from include/linux/mutex.h:18,
                   from include/linux/notifier.h:13,
                   from include/linux/kprobes.h:34,
                   from arch/x86/kernel/kprobes.c:43:
  [...]/arch/x86/include/asm/bitops.h: In function ‘can_boost.part.1’:
  [...]/arch/x86/include/asm/bitops.h:319:2: warning: use of memory input
        without lvalue in asm operand 1 is deprecated [enabled by default]

  $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt
       551:	0f a3 05 00 00 00 00 	bt     %eax,0x0
                          554: R_386_32	.rodata.cst4

  $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o

  arch/x86/kernel/kprobes.o:     file format elf32-i386

  Contents of section .data:
   0000 48000000 00000000 00000000 00000000  H...............
  Contents of section .rodata.cst4:
   0000 4c030000                             L...

Only a single long of twobyte_is_boostable[] is in the object file.

After, without the const on twobyte_is_boostable:

  $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt
       551:	0f a3 05 20 00 00 00 	bt     %eax,0x20
                          554: R_386_32	.data

  $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o

  arch/x86/kernel/kprobes.o:     file format elf32-i386

  Contents of section .data:
   0000 48000000 00000000 00000000 00000000  H...............
   0010 00000000 00000000 00000000 00000000  ................
   0020 4c030000 0f000200 ffff0000 ffcff0c0  L...............
   0030 0000ffff 3bbbfff8 03ff2ebb 26bb2e77  ....;.......&..w

Now all 32 bytes are output into .data instead.

Signed-off-by: Josh Stone 
Cc: Masami Hiramatsu 
Cc: Jakub Jelinek 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

x86: uv2: Workaround for UV2 Hub bug (system global address format)

2011-11-11T17:35:26+00:00

commit 6a469e4665bc158599de55d64388861d0a9f10f4 upstream.

This is a workaround for a UV2 hub bug that affects the format of system
global addresses.

The GRU API for UV2 was inadvertently broken by a hardware change.  The
format of the physical address used for TLB dropins and for addresses used
with instructions running in unmapped mode has changed.  This change was
not documented and became apparent only when diags failed running on
system simulators.

For UV1, TLB and GRU instruction physical addresses are identical to
socket physical addresses (although high NASID bits must be OR'ed into the
address).

For UV2, socket physical addresses need to be converted.  The NODE portion
of the physical address needs to be shifted so that the low bit is in bit
39 or bit 40, depending on an MMR value.

It is not yet clear if this bug will be fixed in a silicon respin.  If it
is fixed, the hub revision will be incremented & the workaround disabled.

Signed-off-by: Jack Steiner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Signed-off-by: Andrew Morton 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

perf, x86: Add model 45 SandyBridge support

2011-10-03T18:40:49+00:00

commit a34668f6beb4ab01e07683276d6a24bab6c175e0 upstream.

Add support to Romely-EP SandyBridge.

Signed-off-by: Youquan Song 
Signed-off-by: Anhua Xu 
Signed-off-by: Lin Ming 
Signed-off-by: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1312264895-2010-1-git-send-email-youquan.song@intel.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

iommu/amd: Make sure iommu->need_sync contains correct value

2011-10-03T18:40:20+00:00

commit f1ca1512e765337a7c09eb875eedef8ea4e07654 upstream.

The value is only set to true but never set back to false,
which causes to many completion-wait commands to be sent to
hardware. Fix it with this patch.

Signed-off-by: Joerg Roedel 
Signed-off-by: Greg Kroah-Hartman

iommu/amd: Don't take domain->lock recursivly

2011-10-03T18:40:20+00:00

commit e33acde91140f1809952d1c135c36feb66a51887 upstream.

The domain_flush_devices() function takes the domain->lock.
But this function is only called from update_domain() which
itself is already called unter the domain->lock. This causes
a deadlock situation when the dma-address-space of a domain
grows larger than 1GB.

Signed-off-by: Joerg Roedel 
Signed-off-by: Greg Kroah-Hartman