linux-toradex.git/arch/x86/pci, branch v3.12

Revert "x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at address zero"

2013-10-04T22:15:29+00:00

This reverts commit 07f9b61c3915e8eb156cb4461b3946736356ad02.

07f9b61c was intended to be a cleanup that didn't change anything, but in
fact, for systems without _CBA (which is almost everything), it broke
extended config space for domain 0 and all config space for other domains.

Reference: http://lkml.kernel.org/r/20131004011806.GE20450@dangermouse.emea.sgi.com
Reported-by: Hedi Berriche 
Signed-off-by: Bjorn Helgaas

Merge tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2013-09-03T23:24:35+00:00

Pull PCI changes from Bjorn Helgaas:

  PCI device hotplug:
    - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
    - Assign resources on per-host bridge basis (Yinghai Lu)

  MPS (Max Payload Size):
    - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
    - Add warnings about unsafe MPS settings (Yijing Wang)
    - Simplify interface and messages (Bjorn Helgaas)

  SR-IOV:
    - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
    - Update NumVFs register when disabling SR-IOV (Yijing Wang)

  Virtualization:
    - Add bus and slot reset support (Alex Williamson)
    - Fix ACS (Access Control Services) issues (Alex Williamson)

  Miscellaneous:
    - Simplify PCIe Capability accessors (Bjorn Helgaas)
    - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
    - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
    - Delay enabling bridges until they're needed (Yinghai Lu)
    - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
    - Convert class code to use dev_groups (Greg Kroah-Hartman)
    - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
    - Fix bridge I/O window alignment (Bjorn Helgaas)
    - Add pci_wait_for_pending_transaction() (Casey Leedom)
    - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)

* tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available
  PCI: exynos: Add I/O access wrappers
  PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
  PCI: Remove pcie_cap_has_devctl()
  PCI: Support PCIe Capability Slot registers only for ports with slots
  PCI: Remove PCIe Capability version checks
  PCI: Allow PCIe Capability link-related register access for switches
  PCI: Add offsets of PCIe capability registers
  PCI: Tidy bitmasks and spacing of PCIe capability definitions
  PCI: Remove obsolete comment reference to pci_pcie_cap2()
  PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment
  PCI: Rename PCIe capability definitions to follow convention
  PCI: Warn if unsafe MPS settings detected
  PCI: Fix MPS peer-to-peer DMA comment syntax
  PCI: Disable decoding for BAR sizing only when it was actually enabled
  PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
  PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
  PCI: Don't restrict MPS for slots below Root Ports
  PCI: Simplify MPS test for Downstream Port
  PCI: Remove unnecessary check for pcie_get_mps() failure
  ...

Merge branch 'pci/yijing-mps-v8' into next

2013-08-26T21:40:34+00:00

* pci/yijing-mps-v8:
  PCI: Warn if unsafe MPS settings detected
  PCI: Fix MPS peer-to-peer DMA comment syntax
  PCI: Don't restrict MPS for slots below Root Ports
  PCI: Simplify MPS test for Downstream Port
  PCI: Remove unnecessary check for pcie_get_mps() failure
  PCI: Simplify pcie_bus_configure_settings() interface
  PCI: Drop "PCI-E" prefix from Max Payload Size message

PCI: Simplify pcie_bus_configure_settings() interface

2013-08-22T16:47:02+00:00

Based on a patch by Jon Mason (see URL below).

All users of pcie_bus_configure_settings() pass arguments of the form
"bus, bus->self->pcie_mpss".  The "mpss" argument is redundant since we
can easily look it up internally.  In addition, all callers check
"bus->self" for NULL, which we can also do internally.

This patch simplifies the interface and the callers.  No functional change.

Reference: http://lkml.kernel.org/r/1317048850-30728-2-git-send-email-mason@myri.com
Signed-off-by: Bjorn Helgaas

x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at address zero

2013-07-26T17:21:24+00:00

We can check for addr being zero earlier and thus avoid the mutex_unlock()
cleanup path.

[bhelgaas: drop warning printk]
Signed-off-by: ethan.zhao 
Signed-off-by: Bjorn Helgaas 
Acked-by: Yinghai Lu

x86/pci/mrst: Cleanup checkpatch.pl warnings

2013-07-25T18:18:41+00:00

This patch fixes warning and errors found by checkpatch.pl:

* replace asm/acpi.h, asm/io.h and asm/smp.h with linux/acpi.h,
linux/io.h and linux/smp.h respectively
* remove explicit initialization to 0 of a static global variable
* replace printk(KERN_INFO ...) with pr_info
* use tabs instead of spaces for indentation
* arrange comments so that they adhere to Documentation/CodingStyle

[bhelgaas: capitalize "PCI", "Langwell", "Lincroft" consistently]
Signed-off-by: Valentina Manea 
Signed-off-by: Bjorn Helgaas 
Acked-by: Ingo Molnar

x86 / PCI: prevent re-allocation of already existing bridge and ROM resources

2013-07-23T01:55:56+00:00

In hotplug case (especially with Thunderbolt enabled systems) we might need
to call pcibios_resource_survey_bus() several times for a bus. The function
ends up calling pci_claim_resource() for each bridge resource that then
fails claiming that the resource exists already (which it does). Once this
happens the resource is invalidated thus preventing devices behind the
bridge to allocate their resources.

To fix this we do what has been done in pcibios_allocate_dev_resources()
and check 'parent' of the given resource. If it is non-NULL it means that
the resource has been allocated already and we can skip it. We do the same
for ROM resources as well.

Signed-off-by: Mika Westerberg 
Acked-by: Bjorn Helgaas 
Signed-off-by: Rafael J. Wysocki

x86: delete __cpuinit usage from all x86 files

2013-07-14T23:36:56+00:00

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Cc: x86@kernel.org
Acked-by: Ingo Molnar 
Acked-by: Thomas Gleixner 
Acked-by: H. Peter Anvin 
Signed-off-by: Paul Gortmaker

Merge tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2013-07-03T23:31:35+00:00

Pull PCI changes from Bjorn Helgaas:
 "PCI device hotplug
    - Add pci_alloc_dev() interface (Gu Zheng)
    - Add pci_bus_get()/put() for reference counting (Jiang Liu)
    - Fix SR-IOV reference count issues (Jiang Liu)
    - Remove unused acpi_pci_roots list (Jiang Liu)

  MSI
    - Conserve interrupt resources on x86 (Alexander Gordeev)

  AER
    - Force fatal severity when component has been reset (Betty Dall)
    - Reset link below Root Port as well as Downstream Port (Betty Dall)
    - Fix "Firmware first" flag setting (Bjorn Helgaas)
    - Don't parse HEST for non-PCIe devices (Bjorn Helgaas)

  ASPM
    - Warn when we can't disable ASPM as driver requests (Bjorn Helgaas)

  Miscellaneous
    - Add CircuitCo PCI IDs (Darren Hart)
    - Add AMD CZ SATA and SMBus PCI IDs (Shane Huang)
    - Work around Ivytown NTB BAR size issue (Jon Mason)
    - Detect invalid initial BAR values (Kevin Hao)
    - Add pcibios_release_device() (Sebastian Ott)
    - Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)"

* tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
  MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci
  PCI: Add CircuitCo vendor ID and subsystem ID
  PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
  PCI: Return early on allocation failures to unindent mainline code
  PCI: Simplify IOV implementation and fix reference count races
  PCI: Drop redundant setting of bus->is_added in virtfn_add_bus()
  unicore32/PCI: Remove redundant call of pci_bus_add_devices()
  m68k/PCI: Remove redundant call of pci_bus_add_devices()
  PCI / ACPI / PM: Use correct power state strings in messages
  PCI: Fix comment typo for pcie_pme_remove()
  PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev()
  PCI: Fix refcount issue in pci_create_root_bus() error recovery path
  ia64/PCI: Clean up pci_scan_root_bus() usage
  PCI/AER: Reset link for devices below Root Port or Downstream Port
  ACPI / APEI: Force fatal AER severity when component has been reset
  PCI/AER: Remove "extern" from function declarations
  PCI/AER: Move AER severity defines to aer.h
  PCI/AER: Set dev->__aer_firmware_first only for matching devices
  PCI/AER: Factor out HEST device type matching
  PCI/AER: Don't parse HEST table for non-PCIe devices
  ...

x86/PCI: Map PCI setup data with ioremap() so it can be in highmem

2013-06-05T16:50:04+00:00

f9a37be0f0 ("x86: Use PCI setup data") added support for using PCI ROM
images from setup_data.  This used phys_to_virt(), which is not valid for
highmem addresses, and can cause a crash when booting a 32-bit kernel via
the EFI boot stub.

pcibios_add_device() assumes that the physical addresses stored in
setup_data are accessible via the direct kernel mapping, and that calling
phys_to_virt() is valid.  This isn't guaranteed to be true on x86 where the
direct mapping range is much smaller than on x86-64.

Calling phys_to_virt() on a highmem address results in the following:

 BUG: unable to handle kernel paging request at 39a3c198
 IP: [] pcibios_add_device+0x2f/0x90
 ...
 Call Trace:
  [] pci_device_add+0xe3/0x130
  [] pci_scan_single_device+0x8b/0xb0
  [] pci_scan_slot+0x48/0x100
  [] pci_scan_child_bus+0x24/0xc0
  [] pci_acpi_scan_root+0x2c0/0x490
  [] acpi_pci_root_add+0x312/0x42f
  ...

The solution is to use ioremap() instead of phys_to_virt() to map the
setup data into the kernel address space.

[bhelgaas: changelog]
Tested-by: Jani Nikula 
Signed-off-by: Matt Fleming 
Signed-off-by: Bjorn Helgaas 
Cc: Matthew Garrett 
Cc: Seth Forshee 
Cc: Jesse Barnes 
Cc: stable@vger.kernel.org	# v3.8+