linux-toradex.git/arch/x86/platform/intel-mid/device_libs, branch v5.0

x86: Fix various typos in comments

2018-12-03T09:49:13+00:00

Go over arch/x86/ and fix common typos in comments,
and a typo in an actual function argument name.

No change in functionality intended.

Cc: Thomas Gleixner 
Cc: Borislav Petkov 
Cc: Peter Zijlstra 
Cc: Linus Torvalds 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-10-23T12:32:18+00:00

Pull perf updates from Ingo Molnar:
 "The main updates in this cycle were:

   - Lots of perf tooling changes too voluminous to list (big perf trace
     and perf stat improvements, lots of libtraceevent reorganization,
     etc.), so I'll list the authors and refer to the changelog for
     details:

       Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter
       Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven
       Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas
       Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir
       Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa.

     ... with the bulk of the changes written by Jiri Olsa, Tzvetomir
     Stoyanov and Arnaldo Carvalho de Melo.

   - Continued intel_rdt work with a focus on playing well with perf
     events. This also imported some non-perf RDT work due to
     dependencies. (Reinette Chatre)

   - Implement counter freezing for Arch Perfmon v4 (Skylake and newer).
     This allows to speed up the PMI handler by avoiding unnecessary MSR
     writes and make it more accurate. (Andi Kleen)

   - kprobes cleanups and simplification (Masami Hiramatsu)

   - Intel Goldmont PMU updates (Kan Liang)

   - ... plus misc other fixes and updates"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits)
  kprobes/x86: Use preempt_enable() in optimized_callback()
  x86/intel_rdt: Prevent pseudo-locking from using stale pointers
  kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack
  perf/x86/intel: Export mem events only if there's PEBS support
  x86/cpu: Drop pointless static qualifier in punit_dev_state_show()
  x86/intel_rdt: Fix initial allocation to consider CDP
  x86/intel_rdt: CBM overlap should also check for overlap with CDP peer
  x86/intel_rdt: Introduce utility to obtain CDP peer
  tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file
  tools lib traceevent: Separate out tep_strerror() for strerror_r() issues
  perf python: More portable way to make CFLAGS work with clang
  perf python: Make clang_has_option() work on Python 3
  perf tools: Free temporary 'sys' string in read_event_files()
  perf tools: Avoid double free in read_event_file()
  perf tools: Free 'printk' string in parse_ftrace_printk()
  perf tools: Cleanup trace-event-info 'tdata' leak
  perf strbuf: Match va_{add,copy} with va_end
  perf test: S390 does not support watchpoints in test 22
  perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG
  tools include: Adopt linux/bits.h
  ...

x86/cpu: Sanitize FAM6_ATOM naming

2018-10-02T08:14:32+00:00

Going primarily by:

  https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors

with additional information gleaned from other related pages; notably:

 - Bonnell shrink was called Saltwell
 - Moorefield is the Merriefield refresh which makes it Airmont

The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE

  for i in `git grep -l FAM6_ATOM` ; do
	sed -i  -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g'		\
		-e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/'		\
		-e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g'		\
		-e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g'	\
		-e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g'		\
		-e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g'	\
		-e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g'	\
		-e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g'	\
		-e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g'	\
		-e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g'		\
		-e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i}
  done

Signed-off-by: Peter Zijlstra (Intel) 
Cc: Alexander Shishkin 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Cc: Thomas Gleixner 
Cc: Vince Weaver 
Cc: dave.hansen@linux.intel.com
Cc: len.brown@intel.com
Signed-off-by: Ingo Molnar

regulator: fixed: Convert to use GPIO descriptor only

2018-09-17T21:32:22+00:00

As we augmented the regulator core to accept a GPIO descriptor instead
of a GPIO number, we can augment the fixed GPIO regulator to look up
and pass that descriptor directly from device tree or board GPIO
descriptor look up tables.

Some boards just auto-enumerate their fixed regulator platform devices
and I have assumed they get names like "fixed-regulator.0" but it's
pretty hard to guess this. I need some testing from board maintainers to
be sure. Other boards are straight forward, using just plain
"fixed-regulator" (ID -1) or "fixed-regulator.1" hammering down the
device ID.

It seems the da9055 and da9211 has never got around to actually passing
any enable gpio into its platform data (not the in-tree code anyway) so we
can just decide to simply pass a descriptor instead.

The fixed GPIO-controlled regulator in mach-pxa/ezx.c was confusingly named
"*_dummy_supply_device" while it is a very real device backed by a GPIO
line. There is nothing dummy about it at all, so I renamed it with the
infix *_regulator_* as part of this patch set.

Intel MID portions tested by Andy.

Tested-by: Andy Shevchenko  # Check the x86 BCM stuff
Acked-by: Tony Lindgren  # OMAP1,2,3 maintainer
Signed-off-by: Linus Walleij 
Reviewed-by: Janusz Krzysztofik 
Reviewed-by: Mike Rapoport 
Signed-off-by: Mark Brown

x86: Don't include linux/irq.h from asm/hardirq.h

2018-08-05T07:53:13+00:00

The next patch in this series will have to make the definition of
irq_cpustat_t available to entering_irq().

Inclusion of asm/hardirq.h into asm/apic.h would cause circular header
dependencies like

  asm/smp.h
    asm/apic.h
      asm/hardirq.h
        linux/irq.h
          linux/topology.h
            linux/smp.h
              asm/smp.h

or

  linux/gfp.h
    linux/mmzone.h
      asm/mmzone.h
        asm/mmzone_64.h
          asm/smp.h
            asm/apic.h
              asm/hardirq.h
                linux/irq.h
                  linux/irqdesc.h
                    linux/kobject.h
                      linux/sysfs.h
                        linux/kernfs.h
                          linux/idr.h
                            linux/gfp.h

and others.

This causes compilation errors because of the header guards becoming
effective in the second inclusion: symbols/macros that had been defined
before wouldn't be available to intermediate headers in the #include chain
anymore.

A possible workaround would be to move the definition of irq_cpustat_t
into its own header and include that from both, asm/hardirq.h and
asm/apic.h.

However, this wouldn't solve the real problem, namely asm/harirq.h
unnecessarily pulling in all the linux/irq.h cruft: nothing in
asm/hardirq.h itself requires it. Also, note that there are some other
archs, like e.g. arm64, which don't have that #include in their
asm/hardirq.h.

Remove the linux/irq.h #include from x86' asm/hardirq.h.

Fix resulting compilation errors by adding appropriate #includes to *.c
files as needed.

Note that some of these *.c files could be cleaned up a bit wrt. to their
set of #includes, but that should better be done from separate patches, if
at all.

Signed-off-by: Nicolai Stange 
Signed-off-by: Thomas Gleixner

x86/platform/intel-mid: Revert "Make 'bt_sfi_data' const"

2018-01-08T19:01:44+00:00

So one of the constification patches unearthed a type casting fragility
of the underlying code:

  276c87054751 ("x86/platform/intel-mid: Make 'bt_sfi_data' const")

converted the struct to be const while it is also used as a temporary
container for important data that is used to fill 'parent' and 'name'
fields in struct platform_device_info.

The compiler doesn't notice this due to an explicit type cast that loses
the const - which fragility will be fixed separately.

This type cast turned a seemingly trivial const propagation patch into a
hard to debug data corruptor and crasher bug.

Signed-off-by: Andy Shevchenko 
Cc: Bhumika Goyal 
Cc: Darren Hart 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: julia.lawall@lip6.fr
Cc: platform-driver-x86@vger.kernel.org
Link: http://lkml.kernel.org/r/20171228122523.21802-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar

Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-11-14T00:58:05+00:00

Pull x86 cleanups from Ingo Molnar:
 "Two changes: Propagate const/__initconst, and use ARRAY_SIZE() some
  more"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/events/amd/iommu: Make iommu_pmu const and __initconst
  x86: Use ARRAY_SIZE

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

x86: Use ARRAY_SIZE

2017-10-19T14:15:47+00:00

Using the ARRAY_SIZE macro improves the readability of the code.

Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
 (sizeof(E)@p /sizeof(*E))
|
 (sizeof(E)@p /sizeof(E[...]))
|
 (sizeof(E)@p /sizeof(T))
)

Signed-off-by: Jérémy Lefaure 
Signed-off-by: Thomas Gleixner 
Cc: linux-video@atrey.karlin.mff.cuni.cz
Cc: Martin Mares 
Cc: Andy Lutomirski 
Link: https://lkml.kernel.org/r/20171001193101.8898-13-jeremy.lefaure@lse.epita.fr

Merge branch 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2017-09-09T21:18:40+00:00

Pull i2c updates from Wolfram Sang:

 - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS

 - quite some driver updates

 - cleanups for the i2c-mux subsystem

 - some subsystem-wide constification

 - further cleanup of include/linux/i2c

* 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
  i2c: sprd: Fix undefined reference errors
  i2c: nomadik: constify amba_id
  i2c: versatile: Make i2c_algo_bit_data const
  i2c: busses: make i2c_adapter_quirks const
  i2c: busses: make i2c_adapter const
  i2c: busses: make i2c_algorithm const
  i2c: Add Spreadtrum I2C controller driver
  dt-bindings: i2c: Add Spreadtrum I2C controller documentation
  i2c-cht-wc: make cht_wc_i2c_adap_driver static
  MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c
  i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones
  i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  MAINTAINERS: drop entry for Blackfin I2C and Sonic's email
  blackfin: merge the two TWI header files
  i2c: davinci: Preserve return value of devm_clk_get
  i2c: mediatek: Add i2c compatible for MediaTek MT7622
  dt-bindings: i2c: Add MediaTek MT7622 i2c binding
  dt-bindings: i2c: modify information formats
  i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support
  ...