linux-toradex.git/arch/x86/platform, branch v3.0.30

x86/UV2: Fix BAU destination timeout initialization

2012-01-26T01:25:01+00:00

commit d059f9fa84a30e04279c6ff615e9e2cf3b260191 upstream.

Move the call to enable_timeouts() forward so that
BAU_MISC_CONTROL is initialized before using it in
calculate_destination_timeout().

Fix the calculation of a BAU destination timeout
for UV2 (in calculate_destination_timeout()).

Signed-off-by: Cliff Wickman 
Link: http://lkml.kernel.org/r/20120116211848.GB5767@sgi.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

x86, mrst: use a temporary variable for SFI irq

2011-11-21T22:31:21+00:00

commit 153b19a3b9fd8b9478495b9ee1f93f6a77c564f9 upstream.

SFI tables reside in RAM and should not be modified once they are
written.  Current code went to set pentry->irq to zero which causes
subsequent reads to fail with invalid SFI table checksum.  This will
break kexec as the second kernel fails to validate SFI tables.

To fix this we use temporary variable for irq number.

Signed-off-by: Mika Westerberg 
Reviewed-by: Kirill A. Shutemov 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

sfi: table irq 0xFF means 'no interrupt'

2011-11-21T22:31:20+00:00

commit a94cc4e6c0a26a7c8f79a432ab2c89534aa674d5 upstream.

According to the SFI specification irq number 0xFF means device has no
interrupt or interrupt attached via GPIO.

Currently, we don't handle this special case and set irq field in
*_board_info structs to 255.  It leads to confusion in some drivers.
Accelerometer driver tries to register interrupt 255, fails and prints
"Cannot get IRQ" to dmesg.

Signed-off-by: Kirill A. Shutemov 
Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

x86: uv2: Workaround for UV2 Hub bug (system global address format)

2011-11-11T17:35:26+00:00

commit 6a469e4665bc158599de55d64388861d0a9f10f4 upstream.

This is a workaround for a UV2 hub bug that affects the format of system
global addresses.

The GRU API for UV2 was inadvertently broken by a hardware change.  The
format of the physical address used for TLB dropins and for addresses used
with instructions running in unmapped mode has changed.  This change was
not documented and became apparent only when diags failed running on
system simulators.

For UV1, TLB and GRU instruction physical addresses are identical to
socket physical addresses (although high NASID bits must be OR'ed into the
address).

For UV2, socket physical addresses need to be converted.  The NODE portion
of the physical address needs to be shifted so that the low bit is in bit
39 or bit 40, depending on an MMR value.

It is not yet clear if this bug will be fixed in a silicon respin.  If it
is fixed, the hub revision will be incremented & the workaround disabled.

Signed-off-by: Jack Steiner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Signed-off-by: Andrew Morton 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

x86, olpc: Wait for last byte of EC command to be accepted

2011-08-29T20:29:14+00:00

commit a3ea14df0e383f44dcb2e61badb71180dbffe526 upstream.

When executing EC commands, only waiting when there are still
more bytes to write is usually fine. However, if the system
suspends very quickly after a call to olpc_ec_cmd(), the last
data byte may not yet be transferred to the EC, and the command
will not complete.

This solves a bug where the SCI wakeup mask was not correctly
written when going into suspend.

It means that sometimes, on XO-1.5 (but not XO-1), the
devices that were marked as wakeup sources can't wake up
the system. e.g. you ask for wifi wakeups, suspend, but then
incoming wifi frames don't wake up the system as they should.

Signed-off-by: Paul Fox 
Signed-off-by: Daniel Drake 
Acked-by: Andres Salomon 
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

x86: Don't use the EFI reboot method by default

2011-07-07T09:35:05+00:00

Testing suggests that at least some Lenovos and some Intels will
fail to reboot via EFI, attempting to jump to an unmapped
physical address. In the long run we could handle this by
providing a page table with a 1:1 mapping of physical addresses,
but for now it's probably just easier to assume that ACPI or
legacy methods will be present and reboot via those.

Signed-off-by: Matthew Garrett 
Cc: Linus Torvalds 
Cc: Andrew Morton 
Cc: Alan Cox 
Link: http://lkml.kernel.org/r/1309985557-15350-1-git-send-email-mjg@redhat.com
Signed-off-by: Ingo Molnar

x86, efi: Do not reserve boot services regions within reserved areas

2011-06-18T20:48:49+00:00

Commit 916f676f8dc started reserving boot service code since some systems
require you to keep that code around until SetVirtualAddressMap is called.

However, in some cases those areas will overlap with reserved regions.
The proper medium-term fix is to fix the bootloader to prevent the
conflicts from occurring by moving the kernel to a better position,
but the kernel should check for this possibility, and only reserve regions
which can be reserved.

Signed-off-by: Maarten Lankhorst 
Link: http://lkml.kernel.org/r/4DF7A005.1050407@gmail.com
Acked-by: Matthew Garrett 
Signed-off-by: H. Peter Anvin 
Signed-off-by: Ingo Molnar

x86, efi: Retain boot service code until after switching to virtual mode

2011-05-26T00:03:53+00:00

UEFI stands for "Unified Extensible Firmware Interface", where "Firmware"
is an ancient African word meaning "Why do something right when you can
do it so wrong that children will weep and brave adults will cower before
you", and "UEI" is Celtic for "We missed DOS so we burned it into your
ROMs". The UEFI specification provides for runtime services (ie, another
way for the operating system to be forced to depend on the firmware) and
we rely on these for certain trivial tasks such as setting up the
bootloader. But some hardware fails to work if we attempt to use these
runtime services from physical mode, and so we have to switch into virtual
mode. So far so dreadful.

The specification makes it clear that the operating system is free to do
whatever it wants with boot services code after ExitBootServices() has been
called. SetVirtualAddressMap() can't be called until ExitBootServices() has
been. So, obviously, a whole bunch of EFI implementations call into boot
services code when we do that. Since we've been charmingly naive and
trusted that the specification may be somehow relevant to the real world,
we've already stuffed a picture of a penguin or something in that address
space. And just to make things more entertaining, we've also marked it
non-executable.

This patch allocates the boot services regions during EFI init and makes
sure that they're executable. Then, after SetVirtualAddressMap(), it
discards them and everyone lives happily ever after. Except for the ones
who have to work on EFI, who live sad lives haunted by the knowledge that
someone's eventually going to write yet another firmware specification.

[ hpa: adding this to urgent with a stable tag since it fixes currently-broken
  hardware.  However, I do not know what the dependencies are and so I do
  not know which -stable versions this may be a candidate for. ]

Signed-off-by: Matthew Garrett 
Link: http://lkml.kernel.org/r/1306331593-28715-1-git-send-email-mjg@redhat.com
Signed-off-by: H. Peter Anvin 
Cc: Tony Luck 
Cc:

x86, UV: Clean up uv_tlb.c

2011-05-25T12:20:14+00:00

SGI UV's uv_tlb.c driver has become rather hard to read, with overly large
functions, non-standard coding style and (way) too long variable, constant
and function names and non-obvious code flow sequences.

This patch improves the readability and maintainability of the driver
significantly, by doing the following strict code cleanups with no side
effects:

 - Split long functions into shorter logical functions.

 - Shortened some variable and structure member names.

 - Added special functions for reads and writes of MMR regs with
   very long names.

 - Added the 'tunables' table to shortened tunables_write().

 - Added the 'stat_description' table to shorten uv_ptc_proc_write().

 - Pass fewer 'stat' arguments where it can be derived from the 'bcp'
   argument.

 - Function definitions consistent on one line, and inline in few (short) cases.

 - Moved some small structures and an atomic inline function to the header file.

 - Moved some local variables to the blocks where they are used.

 - Updated the copyright date.

 - Shortened uv_write_global_mmr64() etc. using some aliasing; no
   line breaks. Renamed many uv_.. functions that are not exported.

 - Aligned structure fields.
    [ note that not all structures are aligned the same way though; I'd like
      to keep the extensive commenting in some of them. ]

 - Shortened some long structure names.

 - Standard pass/fail exit from init_per_cpu()

 - Vertical alignment for mass initializations.

 - More separation between blocks of code.

Tested on a 16-processor Altix UV.

Signed-off-by: Cliff Wickman 
Cc: penberg@kernel.org
Link: http://lkml.kernel.org/r/E1QOw12-0004MN-Lp@eag09.americas.sgi.com
Signed-off-by: Ingo Molnar

x86, UV: Add support for SGI UV2 hub chip

2011-05-25T12:20:13+00:00

This patch adds support for a new version of the SGI UV hub
chip. The hub chip is the node controller that connects multiple
blades into a larger coherent SSI.

For the most part, UV2 is compatible with UV1. The majority of
the changes are in the addresses of MMRs and in a few cases, the
contents of MMRs. These changes are the result in changes in the
system topology such as node configuration, processor types,
maximum nodes, physical address sizes, etc.

Signed-off-by: Jack Steiner 
Link: http://lkml.kernel.org/r/20110511175028.GA18006@sgi.com
Signed-off-by: Ingo Molnar