linux-toradex.git/arch/xtensa/boot/boot-elf/Makefile, branch v4.19

kbuild: rename LDFLAGS to KBUILD_LDFLAGS

2018-08-23T23:22:08+00:00

Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.

Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.

Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.

For some reason, LDFLAGS was not renamed.

Using a well-known variable like LDFLAGS may result in accidental
override of the variable.

Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.

I did not touch Makefiles under tools/ since the tools build system
is a different world.

Signed-off-by: Masahiro Yamada 
Acked-by: Kirill A. Shutemov 
Reviewed-by: Palmer Dabbelt

xtensa: clean up bootable image build targets

2017-03-01T20:32:50+00:00

Currently xtensa uses 'zImage' as a synonym of 'all', but in fact xtensa
supports three targets: 'Image' (ELF image with reset vector), 'zImage'
(compressed redboot image) and 'uImage' (U-Boot image).
Provide separate 'Image', 'zImage' and 'uImage' make targets that only
build corresponding image type. Make 'all' build all images appropriate
for a platform.

Signed-off-by: Max Filippov

xtensa: add MMU v3 support

2013-05-09T08:07:09+00:00

MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB
way 6:

Way 6 (512 MB)
        Vaddr       Paddr       ASID  Attr RWX Cache
        ----------  ----------  ----  ---- --- -------
        0x00000000  0x00000000  0x01  0x03 RWX Bypass
        0x20000000  0x20000000  0x01  0x03 RWX Bypass
        0x40000000  0x40000000  0x01  0x03 RWX Bypass
        0x60000000  0x60000000  0x01  0x03 RWX Bypass
        0x80000000  0x80000000  0x01  0x03 RWX Bypass
        0xa0000000  0xa0000000  0x01  0x03 RWX Bypass
        0xc0000000  0xc0000000  0x01  0x03 RWX Bypass
        0xe0000000  0xe0000000  0x01  0x03 RWX Bypass

This patch adds remapping code at the reset vector or at the kernel
_start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that
reconfigures MMUv3 as MMUv2:

Way 5 (128 MB)
        Vaddr       Paddr       ASID  Attr RWX Cache
        ----------  ----------  ----  ---- --- -------
        0xd0000000  0x00000000  0x01  0x07 RWX WB
        0xd8000000  0x00000000  0x01  0x03 RWX Bypass
Way 6 (256 MB)
        Vaddr       Paddr       ASID  Attr RWX Cache
        ----------  ----------  ----  ---- --- -------
        0xe0000000  0xf0000000  0x01  0x07 RWX WB
        0xf0000000  0xf0000000  0x01  0x03 RWX Bypass

Signed-off-by: Max Filippov 
Signed-off-by: Chris Zankel

xtensa: clean up boot make rules

2012-12-19T05:10:23+00:00

- remove duplicate rules for binary and packed image
- use predefined macros for ld/objcopy/gzip
- remove build-id section from bootable elf image

Signed-off-by: Max Filippov 
Signed-off-by: Chris Zankel

xtensa: drop CONFIG_EMBEDDED_RAMDISK

2012-10-03T22:13:09+00:00

Remove Kconfig entries, boot subdirectory, dependencies from other
boot-* Makefiles, and sections from ld scripts.

Remove stale redboot code that used to pass initrd addresses in a3 and
a4 to _start.

Signed-off-by: Max Filippov 
Signed-off-by: Chris Zankel

xtensa: fix parallel make

2012-10-03T22:12:29+00:00

Make vmlinux.tmp and vmlinux.tmp.gz separate build targets, avoid
removing vmlinux.tmp during vmlinux.tmp.gz build.

Signed-off-by: Max Filippov 
Signed-off-by: Chris Zankel

[XTENSA] Fix makefile to work with binutils-2.18.

2008-02-14T01:45:05+00:00

When building with binutils-2.18, vmlinux includes .note.gnu.build-id
sections that need to be stripped out when building the binary image.
The old .xt.insn sections haven't been used for a long time, so don't
bother stripping them.

Signed-off-by: Bob Wilson 
Signed-off-by: Chris Zankel

[XTENSA] Use preprocessor to generate the linker script for the ELF boot image

2008-02-14T01:26:17+00:00

Signed-off-by: Marc Gauthier 
Signed-off-by: Chris Zankel

[PATCH] xtensa: Removed local copy of zlib and fixed O= support

2005-06-30T15:45:11+00:00

Removed an unnecessary local copy of zlib (sorry for the add'l traffic).
Fixed 'O=' support (thanks to Jan Dittmer for pointing it out).  Some minor
clean-ups in the make files.

Signed-off-by: Chris Zankel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 2

2005-06-24T07:05:21+00:00

The attached patches provides part 2 of an architecture implementation for the
Tensilica Xtensa CPU series.

Signed-off-by: Chris Zankel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds