linux-toradex.git/arch/xtensa/boot/boot-elf, branch master

xtensa: use register window specific opcodes only when present

2021-10-19T05:19:35+00:00

xtensa core may be configured without register windows support, don't
use register window specific opcodes in that case. Use window register
specific opcodes to initialize hardware or reset core to a known state
regardless of the chosen ABI.

Signed-off-by: Max Filippov

xtensa: remove unneeded export in boot-elf/Makefile

2021-04-04T22:39:02+00:00

No one uses these as environment variables.

Signed-off-by: Masahiro Yamada 
Message-Id: <20210313122342.69995-2-masahiroy@kernel.org>
Signed-off-by: Max Filippov

xtensa: move CONFIG_CPU_*_ENDIAN defines to Kconfig

2021-04-04T22:39:02+00:00

Move the definition of CONFIG_CPU_*_ENDIAN to Kconfig, the best place
for CONFIG options.

I slightly simplified the test code. You can use the -P option to suppress
linemarker generation. The grep command is unneeded.

  $ echo __XTENSA_EB__ | xtensa-linux-gcc -E -
  # 1 ""
  # 1 ""
  # 1 ""
  # 1 ""
  1

  $ echo __XTENSA_EB__ | xtensa-linux-gcc -E -P -
  1

Signed-off-by: Masahiro Yamada 
Message-Id: <20210313122342.69995-1-masahiroy@kernel.org>
Signed-off-by: Max Filippov

Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2020-08-09T21:10:26+00:00

Pull Kbuild updates from Masahiro Yamada:

 - run the checker (e.g. sparse) after the compiler

 - remove unneeded cc-option tests for old compiler flags

 - fix tar-pkg to install dtbs

 - introduce ccflags-remove-y and asflags-remove-y syntax

 - allow to trace functions in sub-directories of lib/

 - introduce hostprogs-always-y and userprogs-always-y syntax

 - various Makefile cleanups

* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
  kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
  kbuild: introduce hostprogs-always-y and userprogs-always-y
  kbuild: sort hostprogs before passing it to ifneq
  kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
  kbuild: Replace HTTP links with HTTPS ones
  kbuild: trace functions in subdirectories of lib/
  kbuild: introduce ccflags-remove-y and asflags-remove-y
  kbuild: do not export LDFLAGS_vmlinux
  kbuild: always create directories of targets
  powerpc/boot: add DTB to 'targets'
  kbuild: buildtar: add dtbs support
  kbuild: remove cc-option test of -ffreestanding
  kbuild: remove cc-option test of -fno-stack-protector
  Revert "kbuild: Create directory for target DTB"
  kbuild: run the checker after the compiler

kbuild: do not export LDFLAGS_vmlinux

2020-08-09T16:32:58+00:00

When you clean the build tree for ARCH=arm, you may see the following
error message from 'nm' command:

$ make -j24 ARCH=arm clean
  CLEAN   arch/arm/crypto
  CLEAN   arch/arm/kernel
  CLEAN   arch/arm/mach-at91
  CLEAN   arch/arm/mach-omap2
  CLEAN   arch/arm/vdso
  CLEAN   certs
  CLEAN   lib
  CLEAN   usr
  CLEAN   net/wireless
  CLEAN   drivers/firmware/efi/libstub
nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file
/bin/sh: 1: arithmetic expression: expecting primary: " "
  CLEAN   arch/arm/boot/compressed
  CLEAN   drivers/scsi
  CLEAN   drivers/tty/vt
  CLEAN   arch/arm/boot
  CLEAN   vmlinux.symvers modules.builtin modules.builtin.modinfo

Even if you rerun the same command, the error message will not be
shown despite vmlinux is already gone.

To reproduce it, the parallel option -j is needed. Single thread
cleaning always executes 'archclean', 'vmlinuxclean' in this order,
so vmlinux still exists when arch/arm/boot/compressed/ is cleaned.

Looking at arch/arm/boot/compressed/Makefile does not help understand
the reason of the error message. Both KBSS_SZ and LDFLAGS_vmlinux are
assigned with '=' operator, hence, they are not expanded unless used.
Obviously, 'make clean' does not use them.

In fact, the root cause exists in the top Makefile:

  export LDFLAGS_vmlinux

Since LDFLAGS_vmlinux is an exported variable, LDFLAGS_vmlinux in
arch/arm/boot/compressed/Makefile is expanded when scripts/Makefile.clean
has a command to execute. This is why the error message shows up only
when there exist build artifacts in arch/arm/boot/compressed/.

Adding 'unexport LDFLAGS_vmlinux' to arch/arm/boot/compressed/Makefile
will fix it as far as ARCH=arm is concerned, but I think the proper fix
is to get rid of 'export LDFLAGS_vmlinux' from the top Makefile.

LDFLAGS_vmlinux in the top Makefile contains linker flags for the top
vmlinux. LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is for
arch/arm/boot/compressed/vmlinux. They just happen to have the same
variable name, but are used for different purposes. Stop shadowing
LDFLAGS_vmlinux.

This commit passes LDFLAGS_vmlinux to scripts/link-vmlinux.sh via a
command line parameter instead of via an environment variable. LD and
KBUILD_LDFLAGS are exported, but I did the same for consistency. Anyway,
they must be included in cmd_link-vmlinux to allow if_changed to detect
the changes in LD or KBUILD_LDFLAGS.

The following Makefiles are not affected:

  arch/arm/boot/compressed/Makefile
  arch/h8300/boot/compressed/Makefile
  arch/nios2/boot/compressed/Makefile
  arch/parisc/boot/compressed/Makefile
  arch/s390/boot/compressed/Makefile
  arch/sh/boot/compressed/Makefile
  arch/sh/boot/romimage/Makefile
  arch/x86/boot/compressed/Makefile

They use ':=' or '=' to clear the LDFLAGS_vmlinux inherited from the
top Makefile.

We need to take a closer look at the impact to unicore32 and xtensa.

arch/unicore32/boot/compressed/Makefile only uses '+=' operator for
LDFLAGS_vmlinux. So, the decompressor previously inherited the linker
flags from the top Makefile.

However, commit 70fac51feaf2 ("unicore32 additional architecture files:
boot process") was merged before commit 1f2bfbd00e46 ("kbuild: link of
vmlinux moved to a script"). So, I rather consider this is a bug fix of
1f2bfbd00e46.

arch/xtensa/boot/boot-elf/Makefile is also affected, but this is also
considered a fix for the same reason. It did not inherit LDFLAGS_vmlinux
when commit 4bedea945451 ("[PATCH] xtensa: Architecture support for
Tensilica Xtensa Part 2") was merged. I deleted $(LDFLAGS_vmlinux),
which is now empty.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Nick Desaulniers 
Tested-by: Nick Desaulniers

xtensa: add boot subdirectories build artifacts to 'targets'

2020-07-28T07:57:06+00:00

Xtensa always rebuilds the following even if nothing in the source code
has been changed. Passing V=2 shows the reason.

  AS      arch/xtensa/boot/boot-elf/bootstrap.o - due to bootstrap.o not in $(targets)
  LDS     arch/xtensa/boot/boot-elf/boot.lds - due to boot.lds not in $(targets)

They are built by if_changed(_dep). Add them to 'targets' so .*.cmd files
are included.

Signed-off-by: Masahiro Yamada 
Message-Id: <20200722004707.779601-1-masahiroy@kernel.org>
Signed-off-by: Max Filippov

xtensa: move vmlinux.bin[.gz] to boot subdirectory

2020-07-28T07:57:06+00:00

vmlinux.bin and vmlinux.bin.gz are always rebuilt in the kernel build
process. Add them to 'targets' and move them to the boot subdirectory
where their rules are. Update make rules that refer to them.

Reviewed-by: Masahiro Yamada 
Signed-off-by: Max Filippov

.gitignore: add SPDX License Identifier

2020-03-25T10:50:48+00:00

Add SPDX License Identifier to all .gitignore files.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

xtensa: don't use l32r opcode directly

2018-12-05T20:53:07+00:00

xtensa assembler is capable of representing register loads with either
movi + addmi, l32r or const16, depending on the core configuration.
Don't use '.literal' and 'l32r' directly in the code, use 'movi' and let
the assembler relax them.

Signed-off-by: Max Filippov