linux-toradex.git/arch/xtensa/kernel/setup.c, branch v6.4-rc1

xtensa: make secondary reset vector support conditional

2022-03-10T00:59:18+00:00

Whether xtensa cores start from primary or secondary reset vector is
configurable and may be chosen by board designer or controlled at
runtime. When secondary reset vector is unused its location in memory
may not be writable.
Make secondary reset vector support conditional and don't build and load
secondary reset vector code when it is disabled.

Signed-off-by: Max Filippov

xtensa: use strscpy to copy strings

2022-03-07T04:17:09+00:00

The strlcpy should not be used because it doesn't limit the source
length. So that it will lead some potential bugs.

But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.

Thus, replace strlcpy with strscpy.

Signed-off-by: Jason Wang 
Message-Id: <20211220084756.955307-1-wangborong@cdjrlc.com>
Signed-off-by: Max Filippov

xtensa: move section symbols to asm/sections.h

2021-10-19T05:19:35+00:00

Introduce asm/sections.h and move section declarations to this header
from setup.c. Assign section symbols char array type uniformly and drop
address operator from section symbol references in code.
Sort headers in setup.c while at it.

Signed-off-by: Max Filippov

xtensa: only build windowed register support code when needed

2021-10-19T05:19:35+00:00

There's no need in window overflow/underflow/alloca exception handlers
or window spill code when neither kernel nor userspace support windowed
registers. Don't build or link it.

Signed-off-by: Max Filippov

xtensa: use CONFIG_USE_OF instead of CONFIG_OF

2021-09-27T13:08:58+00:00

CONFIG_OF can be set by a randconfig or by a user -- without setting the
early flattree option (OF_EARLY_FLATTREE).  This causes build errors.
However, if randconfig or a user sets USE_OF in the Xtensa config,
the right kconfig symbols are set to fix the build.

Fixes these build errors:

../arch/xtensa/kernel/setup.c:67:19: error: ‘__dtb_start’ undeclared here (not in a function); did you mean ‘dtb_start’?
   67 | void *dtb_start = __dtb_start;
      |                   ^~~~~~~~~~~
../arch/xtensa/kernel/setup.c: In function 'xtensa_dt_io_area':
../arch/xtensa/kernel/setup.c:201:14: error: implicit declaration of function 'of_flat_dt_is_compatible'; did you mean 'of_machine_is_compatible'? [-Werror=implicit-function-declaration]
  201 |         if (!of_flat_dt_is_compatible(node, "simple-bus"))
../arch/xtensa/kernel/setup.c:204:18: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration]
  204 |         ranges = of_get_flat_dt_prop(node, "ranges", &len);
../arch/xtensa/kernel/setup.c:204:16: error: assignment to 'const __be32 *' {aka 'const unsigned int *'} from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
  204 |         ranges = of_get_flat_dt_prop(node, "ranges", &len);
      |                ^
../arch/xtensa/kernel/setup.c: In function 'early_init_devtree':
../arch/xtensa/kernel/setup.c:228:9: error: implicit declaration of function 'early_init_dt_scan'; did you mean 'early_init_devtree'? [-Werror=implicit-function-declaration]
  228 |         early_init_dt_scan(params);
../arch/xtensa/kernel/setup.c:229:9: error: implicit declaration of function 'of_scan_flat_dt' [-Werror=implicit-function-declaration]
  229 |         of_scan_flat_dt(xtensa_dt_io_area, NULL);

xtensa-elf-ld: arch/xtensa/mm/mmu.o:(.text+0x0): undefined reference to `xtensa_kio_paddr'

Fixes: da844a81779e ("xtensa: add device trees support")
Fixes: 6cb971114f63 ("xtensa: remap io area defined in device tree")
Signed-off-by: Randy Dunlap 
Signed-off-by: Max Filippov

treewide: Convert macro and uses of section(foo) to section("foo")

2020-10-25T21:51:49+00:00

Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

    https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl

Signed-off-by: Joe Perches 
Reviewed-by: Nick Desaulniers 
Reviewed-by: Miguel Ojeda 
Signed-off-by: Linus Torvalds

xtensa: update *pos in cpuinfo_op.next

2020-07-02T15:35:02+00:00

Increment *pos in the cpuinfo_op.next to fix the following warning
triggered by cat /proc/cpuinfo:

  seq_file: buggy .next function c_next did not update position index

Signed-off-by: Max Filippov

mm: don't include asm/pgtable.h if linux/mm.h is already included

2020-06-09T16:39:13+00:00

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes  to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include 
in the files that include .

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include ") ; do
		sed -i -e '/include / d' $f
	done

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Mike Rapoport 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds

Merge tag 'xtensa-20200206' of git://github.com/jcmvbkbc/linux-xtensa

2020-02-07T20:22:29+00:00

Pull xtensa updates from Max Filippov:

 - reorganize exception vectors placement

 - small cleanups (drop unused functions/headers/defconfig entries,
   spelling fixes)

* tag 'xtensa-20200206' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: ISS: improve simcall assembly
  xtensa: reorganize vectors placement
  xtensa: separate SMP and XIP support
  xtensa: move fast exception handlers close to vectors
  arch/xtensa: fix Kconfig typos for HAVE_SMP
  xtensa: clean up optional XCHAL_* definitions
  xtensa: drop unused function fast_coprocessor_double
  xtensa: drop empty platform_* functions from platforms
  xtensa: clean up platform headers
  xtensa: drop set_except_vector declaration
  xtensa: configs: Cleanup old Kconfig IO scheduler options

xtensa: reorganize vectors placement

2020-02-05T05:57:02+00:00

Allow vectors to be either merged into the kernel .text or put at a
fixed virtual address independently of XIP option. Drop option that
puts vectors at a fixed offset from the kernel text. Add choice to
Kconfig.
Vectors at fixed virtual address may be useful for XIP-aware MTD support
and for noMMU configurations with available IRAM. Configurations without
VECBASE register must put their vectors at specific locations regardless
of the selected option. All other configurations should happily use
merged vectors.

Signed-off-by: Max Filippov