commit cba9a90053e3b7973eff4f1946f33032e98eeed5 upstream.

According to create_thread(3): "The new thread does not inherit the creating
thread's alternate signal stack". Since commit f9a3879a (Fix sigaltstack
corruption among cloned threads), current->sas_ss_size is set to 0 for cloned
processes sharing VM with their parent. Don't use the (nonexistent) alternate
signal stack in this case. This has been broken since commit 29c4dfd9 ([XTENSA]
Remove non-rt signal handling).

Fixes the SA_ONSTACK part of the nptl/tst-cancel20 test from uClibc.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c5a771d0678f9613e9f89cf1a5bdcfa5b08b225b upstream.

The virtual address of boot parameters chain is passed to the kernel via
a2 register. Adjust it in case it is remapped during MMUv3 -> MMUv2
mapping change, i.e. when it is in the first 128M.

Also fix interpretation of initrd and FDT addresses passed in the boot
parameters: these are physical addresses.

Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull xtensa updates from Chris Zankel:
 "Support for the latest MMU architecture that allows for a larger
  accessible memory region, and various bug-fixes"

* tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux:
  xtensa: Switch to asm-generic/linkage.h
  xtensa: fix redboot load address
  xtensa: ISS: fix timer_lock usage in rs_open
  xtensa: disable IRQs while IRQ handler is running
  xtensa: enable lockdep support
  xtensa: fix arch_irqs_disabled_flags implementation
  xtensa: add irq flags trace support
  xtensa: provide custom CALLER_ADDR* implementations
  xtensa: add stacktrace support
  xtensa: clean up stpill_registers
  xtensa: don't use a7 in simcalls
  xtensa: don't attempt to use unconfigured timers
  xtensa: provide default platform_pcibios_init implementation
  xtensa: remove KCORE_ELF again
  xtensa: document MMUv3 setup sequence
  xtensa: add MMU v3 support
  xtensa: fix ibreakenable register update
  xtensa: fix oprofile building as module

IRQ handlers are expected to run with IRQs disabled.
See e.g. http://lwn.net/Articles/380931/ for a longer story.

This was overlooked in the commit
  2d1c645 xtensa: dispatch medium-priority interrupts
Revert to old behavior and simplify interrupt entry and exit code.
Interrupt handler still honours IRQ priority.

do_notify_resume/schedule must be called with interrupts enabled, enable
interrupts if we return from user exception.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Definition of CALLER_ADDR* through __builtin_return_address makes
compiler insert calls to __xtensa_libgcc_window_spill, which in turn
makes fast_syscall_spill_registers syscall that clobbers registers when
called from the kernel mode, leading to invalid opcode exceptions on
return to userspace.

Provide definition for CALLER_ADDR0 as MAKE_PC_FROM_RA(a0, a1) and in
case CONFIG_FRAME_POINTER is enabled extract CALLER_ADDR{1-3} from
stack.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

This fixes the following build error:

  arch/xtensa/kernel/built-in.o:(.init.literal+0xe8): undefined reference
	to `platform_pcibios_init'
  arch/xtensa/kernel/built-in.o: In function `setup_arch':
  (.init.text+0x20e): undefined reference to `platform_pcibios_init'

and allows platform to omit definition of platform_pcibios_init if it's
empty.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB
way 6:

Way 6 (512 MB)
        Vaddr       Paddr       ASID  Attr RWX Cache
        ----------  ----------  ----  ---- --- -------
        0x00000000  0x00000000  0x01  0x03 RWX Bypass
        0x20000000  0x20000000  0x01  0x03 RWX Bypass
        0x40000000  0x40000000  0x01  0x03 RWX Bypass
        0x60000000  0x60000000  0x01  0x03 RWX Bypass
        0x80000000  0x80000000  0x01  0x03 RWX Bypass
        0xa0000000  0xa0000000  0x01  0x03 RWX Bypass
        0xc0000000  0xc0000000  0x01  0x03 RWX Bypass
        0xe0000000  0xe0000000  0x01  0x03 RWX Bypass

This patch adds remapping code at the reset vector or at the kernel
_start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that
reconfigures MMUv3 as MMUv2:

Way 5 (128 MB)
        Vaddr       Paddr       ASID  Attr RWX Cache
        ----------  ----------  ----  ---- --- -------
        0xd0000000  0x00000000  0x01  0x07 RWX WB
        0xd8000000  0x00000000  0x01  0x03 RWX Bypass
Way 6 (256 MB)
        Vaddr       Paddr       ASID  Attr RWX Cache
        ----------  ----------  ----  ---- --- -------
        0xe0000000  0xf0000000  0x01  0x07 RWX WB
        0xf0000000  0xf0000000  0x01  0x03 RWX Bypass

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Only set the register when there is at least one ibreak register,
otherwise the build fails:
	arch/xtensa/kernel/head.S:105: Error: invalid register 'ibreakenable'
	for 'wsr' instruction
	arch/xtensa/platforms/iss/setup.c:67: Error: invalid register
	'ibreakenable' for 'wsr' instruction

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>