linux-toradex.git/arch/xtensa, branch v3.10.73

arch: mm: pass userspace fault flag to generic fault handler

2014-11-21T17:22:56+00:00

commit 759496ba6407c6994d6a5ce3a5e74937d7816208 upstream.

Unlike global OOM handling, memory cgroup code will invoke the OOM killer
in any OOM situation because it has no way of telling faults occuring in
kernel context - which could be handled more gracefully - from
user-triggered faults.

Pass a flag that identifies faults originating in user space from the
architecture-specific fault handlers to generic code so that memcg OOM
handling can be improved.

Signed-off-by: Johannes Weiner 
Reviewed-by: Michal Hocko 
Cc: David Rientjes 
Cc: KAMEZAWA Hiroyuki 
Cc: azurIt 
Cc: KOSAKI Motohiro 
Signed-off-by: Andrew Morton 
Signed-off-by: Cong Wang 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

xtensa: re-wire umount syscall to sys_oldumount

2014-11-21T17:22:53+00:00

commit 2651cc6974d47fc43bef1cd8cd26966e4f5ba306 upstream.

Userspace actually passes single parameter (path name) to the umount
syscall, so new umount just fails. Fix it by requesting old umount
syscall implementation and re-wiring umount to it.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix a6 and a7 handling in fast_syscall_xtensa

2014-10-05T21:54:09+00:00

commit d1b6ba82a50cecf94be540a3a153aa89d97511a0 upstream.

Remove restoring a6 on some return paths and instead modify and restore
it in a single place, using symbolic name.
Correctly restore a7 from PT_AREG7 in case of illegal a6 value.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss

2014-10-05T21:54:08+00:00

commit 7128039fe2dd3d59da9e4ffa036f3aaa3ba87b9f upstream.

Current definition of TLBTEMP_BASE_2 is always 32K above the
TLBTEMP_BASE_1, whereas fast_second_level_miss handler for the TLBTEMP
region analyzes virtual address bit (PAGE_SHIFT + DCACHE_ALIAS_ORDER)
to determine TLBTEMP region where the fault happened. The size of the
TLBTEMP region is also checked incorrectly: not 64K, but twice data
cache way size (whicht may as well be less than the instruction cache
way size).

Fix TLBTEMP_BASE_2 to be TLBTEMP_BASE_1 + data cache way size.
Provide TLBTEMP_SIZE that is a greater of doubled data cache way size or
the instruction cache way size, and use it to determine if the second
level TLB miss occured in the TLBTEMP region.

Practical occurence of page faults in the TLBTEMP area is extremely
rare, this code can be tested by deletion of all w[di]tlb instructions
in the tlbtemp_mapping region.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS

2014-10-05T21:54:08+00:00

commit 52247123749cc3cbc30168b33ad8c69515c96d23 upstream.

With SMP and a lot of debug options enabled task_struct::thread gets out
of reach of s32i/l32i instructions with base pointing at task_struct,
breaking build with the following messages:

  arch/xtensa/kernel/entry.S: Assembler messages:
  arch/xtensa/kernel/entry.S:1002: Error: operand 3 of 'l32i.n' has invalid value '1048'
  arch/xtensa/kernel/entry.S:1831: Error: operand 3 of 's32i.n' has invalid value '1040'
  arch/xtensa/kernel/entry.S:1832: Error: operand 3 of 's32i.n' has invalid value '1044'

Change base to point to task_struct::thread in such cases.
Don't use a10 in _switch_to to save/restore prev pointer as a2 is not
clobbered.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix address checks in dma_{alloc,free}_coherent

2014-10-05T21:54:08+00:00

commit 1ca49463c44c970b1ab1d71b0f268bfdf8427a7e upstream.

Virtual address is translated to the XCHAL_KSEG_CACHED region in the
dma_free_coherent, but is checked to be in the 0...XCHAL_KSEG_SIZE
range.

Change check for end of the range from 'addr >= X' to 'addr > X - 1' to
handle the case of X == 0.

Replace 'if (C) BUG();' construct with 'BUG_ON(C);'.

Signed-off-by: Alan Douglas 
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: replace IOCTL code definitions with constants

2014-10-05T21:54:08+00:00

commit f61bf8e7d19e0a3456a7a9ed97c399e4353698dc upstream.

This fixes userspace code that builds on other architectures but fails
on xtensa due to references to structures that other architectures don't
refer to. E.g. this fixes the following issue with python-2.7.8:

  python-2.7.8/Modules/termios.c:861:25: error: invalid application
     of 'sizeof' to incomplete type 'struct serial_multiport_struct'
     {"TIOCSERGETMULTI", TIOCSERGETMULTI},
  python-2.7.8/Modules/termios.c:870:25: error: invalid application
     of 'sizeof' to incomplete type 'struct serial_multiport_struct'
     {"TIOCSERSETMULTI", TIOCSERSETMULTI},
  python-2.7.8/Modules/termios.c:900:24: error: invalid application
     of 'sizeof' to incomplete type 'struct tty_struct'
     {"TIOCTTYGSTRUCT", TIOCTTYGSTRUCT},

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: introduce spill_registers_kernel macro

2014-03-07T05:30:11+00:00

commit e2fd1374c705abe4661df3fb6fadb3879c7c1846 upstream.

Most in-kernel users want registers spilled on the kernel stack and
don't require PS.EXCM to be set. That means that they don't need fixup
routine and could reuse regular window overflow mechanism for that,
which makes spill routine very simple.

Suggested-by: Chris Zankel 
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: xtfpga: fix definitions of platform devices

2014-02-13T21:48:01+00:00

commit a558d99263936b8a67d4eff8918745a77bfd8c31 upstream.

Remove __initdata attribute, as the devices may be used after init
sections are freed.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: don't use alternate signal stack on threads

2013-11-13T03:05:33+00:00

commit cba9a90053e3b7973eff4f1946f33032e98eeed5 upstream.

According to create_thread(3): "The new thread does not inherit the creating
thread's alternate signal stack". Since commit f9a3879a (Fix sigaltstack
corruption among cloned threads), current->sas_ss_size is set to 0 for cloned
processes sharing VM with their parent. Don't use the (nonexistent) alternate
signal stack in this case. This has been broken since commit 29c4dfd9 ([XTENSA]
Remove non-rt signal handling).

Fixes the SA_ONSTACK part of the nptl/tst-cancel20 test from uClibc.

Signed-off-by: Baruch Siach 
Signed-off-by: Max Filippov 
Signed-off-by: Chris Zankel 
Signed-off-by: Greg Kroah-Hartman