If the local critical temperature is reached the power is
unconditionally switched off. At 70°C ambient the default of 85°C
can be reached. So increase the limit in the hwmon chip to 95°C.

If the local critical temperature is reached the power is
unconditionally switched off. At 70°C ambient the default of 85°C
can be reached. So increase the limit in the hwmon chip to 95°C.

Enable PCI quirk support resp. don't explicitly disable it in order for
the following fix to take effect.

The Apalis evaluation board needs to set the link speed to 2.5 GT/s
(GEN1). The default link speed setting is 5 GT/s (GEN2). 0x98 is the
Link Control 2 PCIe Capability Register of the PEX8605 PCIe switch. The
switch supports link speed auto negotiation, but falsely sets the link
speed to 5 GT/s.

Integrate ADV7180 and MAX9526 video decoder support and prepare for
drivers as modules.

The following gstreamer pipeline shows a preview window:

gst-launch v4l2src ! deinterlace tff=1 method=4 ! nv_omx_videomixer !
nv_gl_eglimagesink

Integrate ADV7180 and MAX9526 video decoder support and prepare for
drivers as modules.

Remove tegra_aes_device from the platform device list as it was listed
twice.

Integrate ADV7180 video decoder support.
While at it prepare for ADV7180 as well as MAX9526 drivers as module.

Avoid AXI response decoding errors of the following form by properly
setting the root bus number:

[    3.377991] PCIE: AXI response decoding error, signature: ff01003d
[    3.384174] PCIE: AXI response decoding error, signature: ff01003c

Implement workaround for PLX PEX 8605 errata 5 (PEX_REFCLK_OUTpx/nx
Clock Outputs is not Guaranteed Until 900 us After PEX_PERST#
De-assertion) by releasing RESET_MOCI_N 1 ms after releasing
PEX_PERST_N.