linux-toradex.git/arch, branch v3.10.9

s390: Fix broken build

2013-08-20T15:43:05+00:00

commit 215b28a5308f3d332df2ee09ef11fda45d7e4a92 upstream.

Fix this build error:

  In file included from fs/exec.c:61:0:
  arch/s390/include/asm/tlb.h:35:23: error: expected identifier or '(' before 'unsigned'
  arch/s390/include/asm/tlb.h:36:1: warning: no semicolon at end of struct or union [enabled by default]
  arch/s390/include/asm/tlb.h: In function 'tlb_gather_mmu':
  arch/s390/include/asm/tlb.h:57:5: error: 'struct mmu_gather' has no member named 'end'

Broken due to commit 2b047252d0 ("Fix TLB gather virtual address range
invalidation corner cases").

Cc: Greg Kroah-Hartman 
Signed-off-by: Guenter Roeck 
[ Oh well. We had build testing for ppc amd um, but no s390  - Linus ]
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

m68k/atari: ARAnyM - Fix NatFeat module support

2013-08-20T15:43:05+00:00

commit e8184e10f89736a23ea6eea8e24cd524c5c513d2 upstream.

As pointed out by Andreas Schwab, pointers passed to ARAnyM NatFeat calls
should be physical addresses, not virtual addresses.

Fortunately on Atari, physical and virtual kernel addresses are the same,
as long as normal kernel memory is concerned, so this usually worked fine
without conversion.

But for modules, pointers to literal strings are located in vmalloc()ed
memory. Depending on the version of ARAnyM, this causes the nf_get_id()
call to just fail, or worse, crash ARAnyM itself with e.g.

    Gotcha! Illegal memory access. Atari PC = $968c

This is a big issue for distro kernels, who want to have all drivers as
loadable modules in an initrd.

Add a wrapper for nf_get_id() that copies the literal to the stack to
work around this issue.

Reported-by: Thorsten Glaser 
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Greg Kroah-Hartman

m68k: Truncate base in do_div()

2013-08-20T15:43:05+00:00

commit ea077b1b96e073eac5c3c5590529e964767fc5f7 upstream.

Explicitly truncate the second operand of do_div() to 32 bits to guard
against bogus code calling it with a 64-bit divisor.

[Thorsten]

After upgrading from 3.2 to 3.10, mounting a btrfs volume fails with:

btrfs: setting nodatacow, compression disabled
btrfs: enabling auto recovery
btrfs: disk space caching is enabled
  *** ZERO DIVIDE ***   FORMAT=2
Current process id is 722
BAD KERNEL TRAP: 00000000
Modules linked in: evdev mac_hid ext4 crc16 jbd2 mbcache btrfs xor lzo_compress zlib_deflate raid6_pq crc32c libcrc32c
PC: [<319535b2>] __btrfs_map_block+0x11c/0x119a [btrfs]
SR: 2000  SP: 30c1fab4  a2: 30f0faf0
d0: 00000000    d1: 00001000    d2: 00000000    d3: 00000000
d4: 00010000    d5: 00000000    a0: 3085c72c    a1: 3085c72c
Process mount (pid: 722, task=30f0faf0)
Frame format=2 instr addr=319535ae
Stack from 30c1faec:
        00000000 00000020 00000000 00001000 00000000 01401000 30253928 300ffc00
        00a843ac 3026f640 00000000 00010000 0009e250 00d106c0 00011220 00000000
        00001000 301c6830 0009e32a 000000ff 00000009 3085c72c 00000000 00000000
        30c1fd14 00000000 00000020 00000000 30c1fd14 0009e26c 00000020 00000003
        00000000 0009dd8a 300b0b6c 30253928 00a843ac 00001000 00000000 00000000
        0000a008 3194e76a 30253928 00a843ac 00001000 00000000 00000000 00000002
Call Trace: [<00001000>] kernel_pg_dir+0x0/0x1000

    [...]

Code: 222e ff74 2a2e ff5c 2c2e ff60 4c45 1402 <2d40> ff64 2d41 ff68 2205 4c2e 1800 ff68 4c04 0800 2041 d1c0 2206 4c2e 1400 ff68

[Geert]

As diagnosed by Andreas, fs/btrfs/volumes.c:__btrfs_map_block()
calls

    do_div(stripe_nr, stripe_len);

with stripe_len u64, while do_div() assumes the divisor is a 32-bit number.

Due to the lack of truncation in the m68k-specific implementation of
do_div(), the division is performed using the upper 32-bit word of
stripe_len, which is zero.

This was introduced by commit 53b381b3abeb86f12787a6c40fee9b2f71edc23b
("Btrfs: RAID5 and RAID6"), which changed the divisor from
map->stripe_len (struct map_lookup.stripe_len is int) to a 64-bit temporary.

Reported-by: Thorsten Glaser 
Signed-off-by: Andreas Schwab 
Tested-by: Thorsten Glaser 
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Greg Kroah-Hartman

ARM: 7809/1: perf: fix event validation for software group leaders

2013-08-20T15:43:05+00:00

commit c95eb3184ea1a3a2551df57190c81da695e2144b upstream.

It is possible to construct an event group with a software event as a
group leader and then subsequently add a hardware event to the group.
This results in the event group being validated by adding all members
of the group to a fake PMU and attempting to allocate each event on
their respective PMU.

Unfortunately, for software events wthout a corresponding arm_pmu, this
results in a kernel crash attempting to dereference the ->get_event_idx
function pointer.

This patch fixes the problem by checking explicitly for software events
and ignoring those in event validation (since they can always be
scheduled). We will probably want to revisit this for 3.12, since the
validation checks don't appear to work correctly when dealing with
multiple hardware PMUs anyway.

Reported-by: Vince Weaver 
Tested-by: Vince Weaver 
Tested-by: Mark Rutland 
Signed-off-by: Will Deacon 
Signed-off-by: Russell King 
Signed-off-by: Greg Kroah-Hartman

Fix TLB gather virtual address range invalidation corner cases

2013-08-20T15:43:05+00:00

commit 2b047252d087be7f2ba088b4933cd904f92e6fce upstream.

Ben Tebulin reported:

 "Since v3.7.2 on two independent machines a very specific Git
  repository fails in 9/10 cases on git-fsck due to an SHA1/memory
  failures.  This only occurs on a very specific repository and can be
  reproduced stably on two independent laptops.  Git mailing list ran
  out of ideas and for me this looks like some very exotic kernel issue"

and bisected the failure to the backport of commit 53a59fc67f97 ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").

That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.

The real bug is that the TLB gather virtual memory range setup is subtly
buggered.  It was introduced in commit 597e1c3580b7 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.

The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB.  And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.

Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.

This makes the patch larger, but conceptually much simpler.  And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.

Ben verified that this fixes his problem.

Reported-bisected-and-tested-by: Ben Tebulin 
Build-testing-by: Stephen Rothwell 
Build-testing-by: Richard Weinberger 
Reviewed-by: Michal Hocko 
Acked-by: Peter Zijlstra 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

ARM: KVM: clear exclusive monitor on all exception returns

2013-08-20T15:43:03+00:00

commit 22cfbb6d730ca2fda236b507d9fba17bf002736c upstream.

Make sure we clear the exclusive monitor on all exception returns,
which otherwise could lead to lock corruptions.

Signed-off-by: Marc Zyngier 
Signed-off-by: Christoffer Dall 
Signed-off-by: Jonghwan Choi 
Signed-off-by: Greg Kroah-Hartman

ARM: KVM: add missing dsb before invalidating Stage-2 TLBs

2013-08-20T15:43:03+00:00

commit 479c5ae2f8a55509b691494cd13691d3dc31d102 upstream.

When performing a Stage-2 TLB invalidation, it is necessary to
make sure the write to the page tables is observable by all CPUs.

For this purpose, add a dsb instruction to __kvm_tlb_flush_vmid_ipa
before doing the TLB invalidation itself.

Signed-off-by: Marc Zyngier 
Signed-off-by: Christoffer Dall 
Signed-off-by: Jonghwan Choi 
Signed-off-by: Greg Kroah-Hartman

ARM: KVM: perform save/restore of PAR

2013-08-20T15:43:03+00:00

commit 6a077e4ab9cbfbf279fb955bae05b03781c97013 upstream.

Not saving PAR is an unfortunate oversight. If the guest performs
an AT* operation and gets scheduled out before reading the result
of the translation from PAR, it could become corrupted by another
guest or the host.

Saving this register is made slightly more complicated as KVM also
uses it on the permission fault handling path, leading to an ugly
"stash and restore" sequence. Fortunately, this is already a slow
path so we don't really care. Also, Linux doesn't do any AT*
operation, so Linux guests are not impacted by this bug.

  [ Slightly tweaked to use an even register as first operand to ldrd
    and strd operations in interrupts_head.S - Christoffer ]

Signed-off-by: Marc Zyngier 
Signed-off-by: Christoffer Dall 
Signed-off-by: Jonghwan Choi 
Signed-off-by: Greg Kroah-Hartman

x86 get_unmapped_area(): use proper mmap base for bottom-up direction

2013-08-20T15:43:02+00:00

commit df54d6fa54275ce59660453e29d1228c2b45a826 upstream.

When the stack is set to unlimited, the bottomup direction is used for
mmap-ings but the mmap_base is not used and thus effectively renders
ASLR for mmapings along with PIE useless.

Reviewed-by: Rik van Riel 
Cc: Michel Lespinasse 
Cc: Oleg Nesterov 
Acked-by: Ingo Molnar 
Cc: Adrian Sendroiu 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

microblaze: fix clone syscall

2013-08-20T15:43:02+00:00

commit dfa9771a7c4784bafd0673bc7abcee3813088b77 upstream.

Fix inadvertent breakage in the clone syscall ABI for Microblaze that
was introduced in commit f3268edbe6fe ("microblaze: switch to generic
fork/vfork/clone").

The Microblaze syscall ABI for clone takes the parent tid address in the
4th argument; the third argument slot is used for the stack size.  The
incorrectly-used CLONE_BACKWARDS type assigned parent tid to the 3rd
slot.

This commit restores the original ABI so that existing userspace libc
code will work correctly.

All kernel versions from v3.8-rc1 were affected.

Signed-off-by: Michal Simek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman