linux-toradex.git/arch, branch v3.12.28

x86/xen: resume timer irqs early

2014-09-03T19:31:32+00:00

commit 8d5999df35314607c38fbd6bdd709e25c3a4eeab upstream.

If the timer irqs are resumed during device resume it is possible in
certain circumstances for the resume to hang early on, before device
interrupts are resumed.  For an Ubuntu 14.04 PVHVM guest this would
occur in ~0.5% of resume attempts.

It is not entirely clear what is occuring the point of the hang but I
think a task necessary for the resume calls schedule_timeout(),
waiting for a timer interrupt (which never arrives).  This failure may
require specific tasks to be running on the other VCPUs to trigger
(processes are not frozen during a suspend/resume if PREEMPT is
disabled).

Add IRQF_EARLY_RESUME to the timer interrupts so they are resumed in
syscore_resume().

Signed-off-by: David Vrabel 
Reviewed-by: Boris Ostrovsky 
Signed-off-by: Jiri Slaby

x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub

2014-09-03T19:31:31+00:00

commit 7b2a583afb4ab894f78bc0f8bd136e96b6499a7e upstream.

Without CONFIG_RELOCATABLE the early boot code will decompress the
kernel to LOAD_PHYSICAL_ADDR. While this may have been fine in the BIOS
days, that isn't going to fly with UEFI since parts of the firmware
code/data may be located at LOAD_PHYSICAL_ADDR.

Straying outside of the bounds of the regions we've explicitly requested
from the firmware will cause all sorts of trouble. Bruno reports that
his machine resets while trying to decompress the kernel image.

We already go to great pains to ensure the kernel is loaded into a
suitably aligned buffer, it's just that the address isn't necessarily
LOAD_PHYSICAL_ADDR, because we can't guarantee that address isn't in-use
by the firmware.

Explicitly enforce CONFIG_RELOCATABLE for the EFI boot stub, so that we
can load the kernel at any address with the correct alignment.

Reported-by: Bruno Prémont 
Tested-by: Bruno Prémont 
Cc: H. Peter Anvin 
Signed-off-by: Matt Fleming 
Signed-off-by: Jiri Slaby

x86_64/vsyscall: Fix warn_bad_vsyscall log output

2014-09-03T19:31:31+00:00

commit 53b884ac3745353de220d92ef792515c3ae692f0 upstream.

This commit in Linux 3.6:

    commit c767a54ba0657e52e6edaa97cbe0b0a8bf1c1655
    Author: Joe Perches 
    Date:   Mon May 21 19:50:07 2012 -0700

        x86/debug: Add KERN_ to bare printks, convert printks to pr_

caused warn_bad_vsyscall to output garbage in the middle of the
line.  Revert the bad part of it.

The printk in question isn't actually bare; the level is "%s".

The bug this fixes is purely cosmetic; backports are optional.

Signed-off-by: Andy Lutomirski 
Link: http://lkml.kernel.org/r/03eac1f24110bbe496ecc12a4df467e0d88466d4.1406330947.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin 
Signed-off-by: Jiri Slaby

x86: don't exclude low BIOS area when allocating address space for non-PCI cards

2014-09-03T19:31:30+00:00

commit cbace46a9710a480cae51e4611697df5de41713e upstream.

Commit 30919b0bf356 ("x86: avoid low BIOS area when allocating address
space") moved the test for resource allocations that fall within the first
1MB of address space from the PCI-specific path to a generic path, such
that all resource allocations will avoid this area.  However, this breaks
ISA cards which need to allocate a memory region within the first 1MB.  An
example is the i82365 PCMCIA controller and derivatives like the Ricoh
RF5C296/396 which map part of the PCMCIA socket memory address space into
the first 1MB of system memory address space.  They do not work anymore as
no usable memory region exists due to this change:

  Intel ISA PCIC probe: Ricoh RF5C296/396 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
  host opts [0]: none
  host opts [1]: none
  ISA irqs (scanned) = 3,4,5,9,10 status change on irq 10
  pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0dffff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0e0000-0x0effff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0e0000-0x0effff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0cc000-0x0effff: excluding 0xe0000-0xeffff
  pcmcia_socket pcmcia_socket1: cs: unable to map card memory!

If filtering out the first 1MB is reverted, everything works as expected.

Tested-by: Robert Resch 
Signed-off-by: Christoph Schulz 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Jiri Slaby

Revert "KVM: x86: Increase the number of fixed MTRR regs to 10"

2014-09-03T19:31:27+00:00

commit 0d234daf7e0a3290a3a20c8087eefbd6335a5bd4 upstream.

This reverts commit 682367c494869008eb89ef733f196e99415ae862,
which causes 32-bit SMP Windows 7 guests to panic.

SeaBIOS has a limit on the number of MTRRs that it can handle,
and this patch exceeded the limit.  Better revert it.
Thanks to Nadav Amit for debugging the cause.

Reported-by: Wanpeng Li 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Jiri Slaby

KVM: x86: Inter-privilege level ret emulation is not implemeneted

2014-09-03T19:31:26+00:00

commit 9e8919ae793f4edfaa29694a70f71a515ae9942a upstream.

Return unhandlable error on inter-privilege level ret instruction.  This is
since the current emulation does not check the privilege level correctly when
loading the CS, and does not pop RSP/SS as needed.

Signed-off-by: Nadav Amit 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Jiri Slaby

ARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case.

2014-09-03T19:31:19+00:00

commit 9b5f7428f8b16bd8980213f2b70baf1dd0b9e36c upstream.

According to the comment “restore_es3: applies to 34xx >= ES3.0" in
"arch/arm/mach-omap2/sleep34xx.S”, omap3_restore_es3 should be used
if the revision of an OMAP34xx is ES3.1.2.

Signed-off-by: Jeremy Vial 
Signed-off-by: Tony Lindgren 
Signed-off-by: Jiri Slaby

arch/sparc/math-emu/math_32.c: drop stray break operator

2014-08-26T12:12:01+00:00

[ Upstream commit 093758e3daede29cb4ce6aedb111becf9d4bfc57 ]

This commit is a guesswork, but it seems to make sense to drop this
break, as otherwise the following line is never executed and becomes
dead code. And that following line actually saves the result of
local calculation by the pointer given in function argument. So the
proposed change makes sense if this code in the whole makes sense (but I
am unable to analyze it in the whole).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81641
Reported-by: David Binderman 
Signed-off-by: Andrey Utkin 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

sparc64: ldc_connect() should not return EINVAL when handshake is in progress.

2014-08-26T12:12:01+00:00

[ Upstream commit 4ec1b01029b4facb651b8ef70bc20a4be4cebc63 ]

The LDC handshake could have been asynchronously triggered
after ldc_bind() enables the ldc_rx() receive interrupt-handler
(and thus intercepts incoming control packets)
and before vio_port_up() calls ldc_connect(). If that is the case,
ldc_connect() should return 0 and let the state-machine
progress.

Signed-off-by: Sowmini Varadhan 
Acked-by: Karl Volz 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

sparc64: Guard against flushing openfirmware mappings.

2014-08-26T12:11:59+00:00

[ Upstream commit 4ca9a23765da3260058db3431faf5b4efd8cf926 ]

Based almost entirely upon a patch by Christopher Alexander Tobias
Schulze.

In commit db64fe02258f1507e13fe5212a989922323685ce ("mm: rewrite vmap
layer") lazy VMAP tlb flushing was added to the vmalloc layer.  This
causes problems on sparc64.

Sparc64 has two VMAP mapped regions and they are not contiguous with
eachother.  First we have the malloc mapping area, then another
unrelated region, then the vmalloc region.

This "another unrelated region" is where the firmware is mapped.

If the lazy TLB flushing logic in the vmalloc code triggers after
we've had both a module unload and a vfree or similar, it will pass an
address range that goes from somewhere inside the malloc region to
somewhere inside the vmalloc region, and thus covering the
openfirmware area entirely.

The sparc64 kernel learns about openfirmware's dynamic mappings in
this region early in the boot, and then services TLB misses in this
area.  But openfirmware has some locked TLB entries which are not
mentioned in those dynamic mappings and we should thus not disturb
them.

These huge lazy TLB flush ranges causes those openfirmware locked TLB
entries to be removed, resulting in all kinds of problems including
hard hangs and crashes during reboot/reset.

Besides causing problems like this, such huge TLB flush ranges are
also incredibly inefficient.  A plea has been made with the author of
the VMAP lazy TLB flushing code, but for now we'll put a safety guard
into our flush_tlb_kernel_range() implementation.

Since the implementation has become non-trivial, stop defining it as a
macro and instead make it a function in a C source file.

Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby