linux-toradex.git/arch, branch v3.2.28

s390/compat: fix mmap compat system calls

2012-08-19T17:15:35+00:00

commit e85871218513c54f7dfdb6009043cb638f2fecbe upstream.

The native 31 bit and the compat behaviour for the mmap system calls differ:

In native 31 bit mode the passed in address for the mmap system call will be
unmodified passed to sys_mmap_pgoff().
In compat mode however the passed in address will be modified with
compat_ptr() which masks out the most significant bit.

The result is that in native 31 bit mode each mmap request (with MAP_FIXED)
will fail where the most significat bit is set, while in compat mode it
may succeed.

This odd behaviour was introduced with d3815898 "[S390] mmap: add missing
compat_ptr conversion to both mmap compat syscalls".

To restore a consistent behaviour accross native and compat mode this
patch functionally reverts the above mentioned commit.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Ben Hutchings

s390/compat: fix compat wrappers for process_vm system calls

2012-08-19T17:15:35+00:00

commit 82aabdb6f1eb61e0034ec23901480f5dd23db7c4 upstream.

The compat wrappers incorrectly called the non compat versions of
the system process_vm system calls.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Ben Hutchings

Input: eeti_ts: pass gpio value instead of IRQ

2012-08-19T17:15:34+00:00

commit 4eef6cbfcc03b294d9d334368a851b35b496ce53 upstream.

The EETI touchscreen asserts its IRQ line as soon as it has data in its
internal buffers. The line is automatically deasserted once all data has
been read via I2C. Hence, the driver has to monitor the GPIO line and
cannot simply rely on the interrupt handler reception.

In the current implementation of the driver, irq_to_gpio() is used to
determine the GPIO number from the i2c_client's IRQ value.

As irq_to_gpio() is not available on all platforms, this patch changes
this and makes the driver ignore the passed in IRQ. Instead, a GPIO is
added to the platform_data struct and gpio_to_irq is used to derive the
IRQ from that GPIO. If this fails, bail out. The driver is only able to
work in environments where the touchscreen GPIO can be mapped to an
IRQ.

Without this patch, building raumfeld_defconfig results in:

drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active':
drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]

Signed-off-by: Daniel Mack 
Signed-off-by: Arnd Bergmann 
Cc: Dmitry Torokhov 
Cc: Sven Neumann 
Cc: linux-input@vger.kernel.org
Cc: Haojian Zhuang 
[bwh: Backported to 3.2: raumfeld_controller_i2c_board_info.irq was
 initialised using gpio_to_irq(), but this doesn't seem to matter]
Signed-off-by: Ben Hutchings

ARM: mxs: Remove MMAP_MIN_ADDR setting from mxs_defconfig

2012-08-19T17:15:29+00:00

commit 3bed491c8d28329e34f8a31e3fe64d03f3a350f1 upstream.

The CONFIG_DEFAULT_MMAP_MIN_ADDR was set to 65536 in mxs_defconfig,
this caused severe breakage of userland applications since the upper
limit for ARM is 32768. By default CONFIG_DEFAULT_MMAP_MIN_ADDR is
set to 4096 and can also be changed via /proc/sys/vm/mmap_min_addr
if needed.

Quoting Russell King [1]:

"4096 is also fine for ARM too. There's not much point in having
defconfigs change it - that would just be pure noise in the config
files."

the CONFIG_DEFAULT_MMAP_MIN_ADDR can be removed from the defconfig
altogether.

This problem was introduced by commit cde7c41 (ARM: configs: add
defconfig for mach-mxs).

[1] http://marc.info/?l=linux-arm-kernel&m=134401593807820&w=2

Signed-off-by: Marek Vasut 
Cc: Russell King 
Cc: Wolfgang Denk 
Signed-off-by: Shawn Guo 
Signed-off-by: Ben Hutchings

KVM: VMX: Advertise CPU_BASED_RDPMC_EXITING for nested guests

2012-08-19T17:15:28+00:00

Based on commit fee84b079d5ddee2247b5c1f53162c330c622902 upstream.

  Intercept RDPMC and forward it to the PMU emulation code.

Newer vmx support will only allow to load the kvm_intel module
if RDPMC_EXITING is supported. Even without the actual support
this part of the change is required on 3.2 hosts.

BugLink: http://bugs.launchpad.net/bugs/1031090
Signed-off-by: Stefan Bader 
Signed-off-by: Avi Kivity 
Signed-off-by: Ben Hutchings

m68k: Make sys_atomic_cmpxchg_32 work on classic m68k

2012-08-09T23:25:13+00:00

commit 9e2760d18b3cf179534bbc27692c84879c61b97c upstream.

User space access must always go through uaccess accessors, since on
classic m68k user space and kernel space are completely separate.

Signed-off-by: Andreas Schwab 
Tested-by: Thorsten Glaser 
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Ben Hutchings

ARM: Fix undefined instruction exception handling

2012-08-09T23:25:06+00:00

commit 15ac49b65024f55c4371a53214879a9c77c4fbf9 upstream.

While trying to get a v3.5 kernel booted on the cubox, I noticed that
VFP does not work correctly with VFP bounce handling.  This is because
of the confusion over 16-bit vs 32-bit instructions, and where PC is
supposed to point to.

The rule is that FP handlers are entered with regs->ARM_pc pointing at
the _next_ instruction to be executed.  However, if the exception is
not handled, regs->ARM_pc points at the faulting instruction.

This is easy for ARM mode, because we know that the next instruction and
previous instructions are separated by four bytes.  This is not true of
Thumb2 though.

Since all FP instructions are 32-bit in Thumb2, it makes things easy.
We just need to select the appropriate adjustment.  Do this by moving
the adjustment out of do_undefinstr() into the assembly code, as only
the assembly code knows whether it's dealing with a 32-bit or 16-bit
instruction.

Acked-by: Will Deacon 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 7478/1: errata: extend workaround for erratum #720789

2012-08-09T23:25:06+00:00

commit 5a783cbc48367cfc7b65afc75430953dfe60098f upstream.

Commit cdf357f1 ("ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS
operations can broadcast a faulty ASID") replaced by-ASID TLB flushing
operations with all-ASID variants to workaround A9 erratum #720789.

This patch extends the workaround to include the tlb_range operations,
which were overlooked by the original patch.

Tested-by: Steve Capper 
Signed-off-by: Will Deacon 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 7477/1: vfp: Always save VFP state in vfp_pm_suspend on UP

2012-08-09T23:25:05+00:00

commit 24b35521b8ddf088531258f06f681bb7b227bf47 upstream.

vfp_pm_suspend should save the VFP state in suspend after
any lazy context switch.  If it only saves when the VFP is enabled,
the state can get lost when, on a UP system:
  Thread 1 uses the VFP
  Context switch occurs to thread 2, VFP is disabled but the
     VFP context is not saved
  Thread 2 initiates suspend
  vfp_pm_suspend is called with the VFP disabled, and the unsaved
     VFP context of Thread 1 in the registers

Modify vfp_pm_suspend to save the VFP context whenever
vfp_current_hw_state is not NULL.

Includes a fix from Ido Yariv , who pointed out that on
SMP systems, the state pointer can be pointing to a freed task struct if
a task exited on another cpu, fixed by using #ifndef CONFIG_SMP in the
new if clause.

Cc: Barry Song 
Cc: Catalin Marinas 
Cc: Ido Yariv 
Cc: Daniel Drake 
Cc: Will Deacon 
Signed-off-by: Colin Cross 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 7476/1: vfp: only clear vfp state for current cpu in vfp_pm_suspend

2012-08-09T23:25:04+00:00

commit a84b895a2348f0dbff31b71ddf954f70a6cde368 upstream.

vfp_pm_suspend runs on each cpu, only clear the hardware state
pointer for the current cpu.  Prevents a possible crash if one
cpu clears the hw state pointer when another cpu has already
checked if it is valid.

Signed-off-by: Colin Cross 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings