linux-toradex.git/arch, branch v3.2.3 Linux kernel for Apalis and Colibri modules mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball 2012-02-03T17:22:27+00:00 Philippe Langlais philippe.langlais@linaro.org 2012-01-20T08:20:40+00:00 7b171c58d568dfb42b16b446f8f38b416359e0af commit 2ab1159e80e8f416071e9f51e4f77b9173948296 upstream. MMC_CAP_SD_HIGHSPEED is not supported on Snowball board resulting on initialization errors. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
commit 2ab1159e80e8f416071e9f51e4f77b9173948296 upstream.

MMC_CAP_SD_HIGHSPEED is not supported on Snowball board resulting on
initialization errors.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com>
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
net: bpf_jit: fix divide by 0 generation 2012-02-03T17:22:20+00:00 Eric Dumazet eric.dumazet@gmail.com 2012-01-18T07:21:42+00:00 cb65f39fb559707c4b5c85f14f804fa060d0609f [ Upstream commit d00a9dd21bdf7908b70866794c8313ee8a5abd5c ] Several problems fixed in this patch : 1) Target of the conditional jump in case a divide by 0 is performed by a bpf is wrong. 2) Must 'generate' the full function prologue/epilogue at pass=0, or else we can stop too early in pass=1 if the proglen doesnt change. (if the increase of prologue/epilogue equals decrease of all instructions length because some jumps are converted to near jumps) 3) Change the wrong length detection at the end of code generation to issue a more explicit message, no need for a full stack trace. Reported-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit d00a9dd21bdf7908b70866794c8313ee8a5abd5c ]

Several problems fixed in this patch :

1) Target of the conditional jump in case a divide by 0 is performed
   by a bpf is wrong.

2) Must 'generate' the full function prologue/epilogue at pass=0,
   or else we can stop too early in pass=1 if the proglen doesnt change.
   (if the increase of prologue/epilogue equals decrease of all
    instructions length because some jumps are converted to near jumps)

3) Change the wrong length detection at the end of code generation to
   issue a more explicit message, no need for a full stack trace.

Reported-by: Phil Oester <kernel@linuxace.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86: xen: size struct xen_spinlock to always fit in arch_spinlock_t 2012-02-03T17:21:51+00:00 David Vrabel david.vrabel@citrix.com 2012-01-23T19:32:25+00:00 34793f20e774a02e73605de68b0505d4f12306c1 commit 7a7546b377bdaa25ac77f33d9433c59f259b9688 upstream. If NR_CPUS < 256 then arch_spinlock_t is only 16 bits wide but struct xen_spinlock is 32 bits. When a spin lock is contended and xl->spinners is modified the two bytes immediately after the spin lock would be corrupted. This is a regression caused by 84eb950db13ca40a0572ce9957e14723500943d6 (x86, ticketlock: Clean up types and accessors) which reduced the size of arch_spinlock_t. Fix this by making xl->spinners a u8 if NR_CPUS < 256. A BUILD_BUG_ON() is also added to check the sizes of the two structures are compatible. In many cases this was not noticable as there would often be padding bytes after the lock (e.g., if any of CONFIG_GENERIC_LOCKBREAK, CONFIG_DEBUG_SPINLOCK, or CONFIG_DEBUG_LOCK_ALLOC were enabled). The bnx2 driver is affected. In struct bnx2, phy_lock and indirect_lock may have no padding after them. Contention on phy_lock would corrupt indirect_lock making it appear locked and the driver would deadlock. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7a7546b377bdaa25ac77f33d9433c59f259b9688 upstream.

If NR_CPUS < 256 then arch_spinlock_t is only 16 bits wide but struct
xen_spinlock is 32 bits.  When a spin lock is contended and
xl->spinners is modified the two bytes immediately after the spin lock
would be corrupted.

This is a regression caused by 84eb950db13ca40a0572ce9957e14723500943d6
(x86, ticketlock: Clean up types and accessors) which reduced the size
of arch_spinlock_t.

Fix this by making xl->spinners a u8 if NR_CPUS < 256.  A
BUILD_BUG_ON() is also added to check the sizes of the two structures
are compatible.

In many cases this was not noticable as there would often be padding
bytes after the lock (e.g., if any of CONFIG_GENERIC_LOCKBREAK,
CONFIG_DEBUG_SPINLOCK, or CONFIG_DEBUG_LOCK_ALLOC were enabled).

The bnx2 driver is affected. In struct bnx2, phy_lock and
indirect_lock may have no padding after them.  Contention on phy_lock
would corrupt indirect_lock making it appear locked and the driver
would deadlock.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards 2012-02-03T17:21:46+00:00 Will Deacon will.deacon@arm.com 2012-01-20T11:10:18+00:00 33d812de490956625ef74e2fb47d6dc2c9d34c0f commit 612539e81f655f6ac73c7af1da8701c1ee618aee upstream. On v7, we use the same cache maintenance instructions for data lines as for unified lines. This was not the case for v6, where HARVARD_CACHE was defined to indicate the L1 cache topology. This patch removes the erroneous compile-time check for HARVARD_CACHE in proc-v7.S, ensuring that we perform I-side invalidation at boot. Reported-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Catalin Marinas <Catalin.Marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 612539e81f655f6ac73c7af1da8701c1ee618aee upstream.

On v7, we use the same cache maintenance instructions for data lines
as for unified lines. This was not the case for v6, where HARVARD_CACHE
was defined to indicate the L1 cache topology.

This patch removes the erroneous compile-time check for HARVARD_CACHE in
proc-v7.S, ensuring that we perform I-side invalidation at boot.

Reported-and-Acked-by: Shawn Guo <shawn.guo@linaro.org>

Acked-by: Catalin Marinas <Catalin.Marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mach-ux500: enable ARM errata 764369 2012-02-03T17:21:45+00:00 Srinidhi KASAGAR srinidhi.kasagar@stericsson.com 2012-01-12T05:37:43+00:00 61766889e65d726b8cae1dc4e90de5c25664ec76 commit d65015f7c5c5be9fd3f5e567889c844ba81bdc9c upstream. This applies ARM errata 764369 for all ux500 platforms. Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d65015f7c5c5be9fd3f5e567889c844ba81bdc9c upstream.

This applies ARM errata 764369 for all ux500 platforms.

Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: at91: fix at91rm9200 soc subtype handling 2012-02-03T17:21:45+00:00 Nicolas Ferre nicolas.ferre@atmel.com 2011-12-28T11:10:04+00:00 5e0ff93a215968c5ae4a9cb41c88a819499b57fa commit 3e90772f76010c315474bde59eaca7cc4c94d645 upstream. Currently setting it to PQFP changes subtype to BGA as subtypes are swapped in at91rm9200_set_type(). Wrong subtype causes GPIO bank D not to work at all. After this fix, subtype is still set as unknown. But board code should fill it in with proper value. Another information is thus printed. Bug discovery and first implementation made by Veli-Pekka Peltola. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3e90772f76010c315474bde59eaca7cc4c94d645 upstream.

Currently setting it to PQFP changes subtype to BGA as subtypes are
swapped in at91rm9200_set_type().

Wrong subtype causes GPIO bank D not to work at all.

After this fix, subtype is still set as unknown. But board code should
fill it in with proper value. Another information is thus printed.

Bug discovery and first implementation made by Veli-Pekka Peltola.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
m68k: Fix assembler constraint to prevent overeager gcc optimisation 2012-02-03T17:21:38+00:00 Andreas Schwab schwab@linux-m68k.org 2012-01-09T14:10:15+00:00 b1cd343b25d514e77850db6971c5066b0f0645dd commit 2a3535069e33d8b416f406c159ce924427315303 upstream. Passing the address of a variable as an operand to an asm statement doesn't mark the value of this variable as used, so gcc may optimize its initialisation away. Fix this by using the "m" constraint instead. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2a3535069e33d8b416f406c159ce924427315303 upstream.

Passing the address of a variable as an operand to an asm statement
doesn't mark the value of this variable as used, so gcc may optimize its
initialisation away.  Fix this by using the "m" constraint instead.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/microcode_amd: Add support for CPU family specific container files 2012-02-03T17:21:38+00:00 Andreas Herrmann andreas.herrmann3@amd.com 2012-01-20T16:44:12+00:00 26e15e85d0ede680bf326933731ce4d2ec48fe82 commit 5b68edc91cdc972c46f76f85eded7ffddc3ff5c2 upstream. We've decided to provide CPU family specific container files (starting with CPU family 15h). E.g. for family 15h we have to load microcode_amd_fam15h.bin instead of microcode_amd.bin Rationale is that starting with family 15h patch size is larger than 2KB which was hard coded as maximum patch size in various microcode loaders (not just Linux). Container files which include patches larger than 2KB cause different kinds of trouble with such old patch loaders. Thus we have to ensure that the default container file provides only patches with size less than 2KB. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20120120164412.GD24508@alberich.amd.com [ documented the naming convention and tidied the code a bit. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5b68edc91cdc972c46f76f85eded7ffddc3ff5c2 upstream.

We've decided to provide CPU family specific container files
(starting with CPU family 15h). E.g. for family 15h we have to
load microcode_amd_fam15h.bin instead of microcode_amd.bin

Rationale is that starting with family 15h patch size is larger
than 2KB which was hard coded as maximum patch size in various
microcode loaders (not just Linux).

Container files which include patches larger than 2KB cause
different kinds of trouble with such old patch loaders. Thus we
have to ensure that the default container file provides only
patches with size less than 2KB.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20120120164412.GD24508@alberich.amd.com
[ documented the naming convention and tidied the code a bit. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/uv: Fix uv_gpa_to_soc_phys_ram() shift 2012-02-03T17:21:36+00:00 Russ Anderson rja@sgi.com 2012-01-19T02:07:54+00:00 5d9b4b40f713274ca0e632826fdc1cec8dc9ae6f commit 5a51467b146ab7948d2f6812892eac120a30529c upstream. uv_gpa_to_soc_phys_ram() was inadvertently ignoring the shift values. This fix takes the shift into account. Signed-off-by: Russ Anderson <rja@sgi.com> Link: http://lkml.kernel.org/r/20120119020753.GA7228@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5a51467b146ab7948d2f6812892eac120a30529c upstream.

uv_gpa_to_soc_phys_ram() was inadvertently ignoring the
shift values.  This fix takes the shift into account.

Signed-off-by: Russ Anderson <rja@sgi.com>
Link: http://lkml.kernel.org/r/20120119020753.GA7228@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/uv: Fix uninitialized spinlocks 2012-02-03T17:21:35+00:00 Cliff Wickman cpw@sgi.com 2012-01-18T15:40:47+00:00 c7e4489fb8616f81319673912fc2682b89636b9b commit d2ebc71d472020bc30e29afe8c4d2a85a5b41f56 upstream. Initialize two spinlocks in tlb_uv.c and also properly define/initialize the uv_irq_lock. The lack of explicit initialization seems to be functionally harmless, but it is diagnosed when these are turned on: CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_LOCKDEP=y Signed-off-by: Cliff Wickman <cpw@sgi.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/E1RnXd1-0003wU-PM@eag09.americas.sgi.com [ Added the uv_irq_lock initialization fix by Dimitri Sivanich ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d2ebc71d472020bc30e29afe8c4d2a85a5b41f56 upstream.

Initialize two spinlocks in tlb_uv.c and also properly define/initialize
the uv_irq_lock.

The lack of explicit initialization seems to be functionally
harmless, but it is diagnosed when these are turned on:

        CONFIG_DEBUG_SPINLOCK=y
        CONFIG_DEBUG_MUTEXES=y
        CONFIG_DEBUG_LOCK_ALLOC=y
        CONFIG_LOCKDEP=y

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Link: http://lkml.kernel.org/r/E1RnXd1-0003wU-PM@eag09.americas.sgi.com
[ Added the uv_irq_lock initialization fix by Dimitri Sivanich ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>