linux-toradex.git/arch, branch v3.4.70

ARM: 7670/1: fix the memset fix

2013-11-20T18:43:19+00:00

commit 418df63adac56841ef6b0f1fcf435bc64d4ed177 upstream.

Commit 455bd4c430b0 ("ARM: 7668/1: fix memset-related crashes caused by
recent GCC (4.7.2) optimizations") attempted to fix a compliance issue
with the memset return value.  However the memset itself became broken
by that patch for misaligned pointers.

This fixes the above by branching over the entry code from the
misaligned fixup code to avoid reloading the original pointer.

Also, because the function entry alignment is wrong in the Thumb mode
compilation, that fixup code is moved to the end.

While at it, the entry instructions are slightly reworked to help dual
issue pipelines.

Signed-off-by: Nicolas Pitre 
Tested-by: Alexander Holler 
Signed-off-by: Russell King 
Cc: Eric Bénard 
Signed-off-by: Greg Kroah-Hartman

ARM: 7668/1: fix memset-related crashes caused by recent GCC (4.7.2) optimizations

2013-11-20T18:43:19+00:00

commit 455bd4c430b0c0a361f38e8658a0d6cb469942b5 upstream.

Recent GCC versions (e.g. GCC-4.7.2) perform optimizations based on
assumptions about the implementation of memset and similar functions.
The current ARM optimized memset code does not return the value of
its first argument, as is usually expected from standard implementations.

For instance in the following function:

void debug_mutex_lock_common(struct mutex *lock, struct mutex_waiter *waiter)
{
	memset(waiter, MUTEX_DEBUG_INIT, sizeof(*waiter));
	waiter->magic = waiter;
	INIT_LIST_HEAD(&waiter->list);
}

compiled as:

800554d0 :
800554d0:       e92d4008        push    {r3, lr}
800554d4:       e1a00001        mov     r0, r1
800554d8:       e3a02010        mov     r2, #16 ; 0x10
800554dc:       e3a01011        mov     r1, #17 ; 0x11
800554e0:       eb04426e        bl      80165ea0 
800554e4:       e1a03000        mov     r3, r0
800554e8:       e583000c        str     r0, [r3, #12]
800554ec:       e5830000        str     r0, [r3]
800554f0:       e5830004        str     r0, [r3, #4]
800554f4:       e8bd8008        pop     {r3, pc}

GCC assumes memset returns the value of pointer 'waiter' in register r0; causing
register/memory corruptions.

This patch fixes the return value of the assembly version of memset.
It adds a 'mov' instruction and merges an additional load+store into
existing load/store instructions.
For ease of review, here is a breakdown of the patch into 4 simple steps:

Step 1
======
Perform the following substitutions:
ip -> r8, then
r0 -> ip,
and insert 'mov ip, r0' as the first statement of the function.
At this point, we have a memset() implementation returning the proper result,
but corrupting r8 on some paths (the ones that were using ip).

Step 2
======
Make sure r8 is saved and restored when (! CALGN(1)+0) == 1:

save r8:
-       str     lr, [sp, #-4]!
+       stmfd   sp!, {r8, lr}

and restore r8 on both exit paths:
-       ldmeqfd sp!, {pc}               @ Now <64 bytes to go.
+       ldmeqfd sp!, {r8, pc}           @ Now <64 bytes to go.
(...)
        tst     r2, #16
        stmneia ip!, {r1, r3, r8, lr}
-       ldr     lr, [sp], #4
+       ldmfd   sp!, {r8, lr}

Step 3
======
Make sure r8 is saved and restored when (! CALGN(1)+0) == 0:

save r8:
-       stmfd   sp!, {r4-r7, lr}
+       stmfd   sp!, {r4-r8, lr}

and restore r8 on both exit paths:
        bgt     3b
-       ldmeqfd sp!, {r4-r7, pc}
+       ldmeqfd sp!, {r4-r8, pc}
(...)
        tst     r2, #16
        stmneia ip!, {r4-r7}
-       ldmfd   sp!, {r4-r7, lr}
+       ldmfd   sp!, {r4-r8, lr}

Step 4
======
Rewrite register list "r4-r7, r8" as "r4-r8".

Signed-off-by: Ivan Djelic 
Reviewed-by: Nicolas Pitre 
Signed-off-by: Dirk Behme 
Signed-off-by: Russell King 
Cc: Eric Bénard 
Signed-off-by: Greg Kroah-Hartman

xtensa: don't use alternate signal stack on threads

2013-11-13T03:01:49+00:00

commit cba9a90053e3b7973eff4f1946f33032e98eeed5 upstream.

According to create_thread(3): "The new thread does not inherit the creating
thread's alternate signal stack". Since commit f9a3879a (Fix sigaltstack
corruption among cloned threads), current->sas_ss_size is set to 0 for cloned
processes sharing VM with their parent. Don't use the (nonexistent) alternate
signal stack in this case. This has been broken since commit 29c4dfd9 ([XTENSA]
Remove non-rt signal handling).

Fixes the SA_ONSTACK part of the nptl/tst-cancel20 test from uClibc.

Signed-off-by: Baruch Siach 
Signed-off-by: Max Filippov 
Signed-off-by: Chris Zankel 
Signed-off-by: Greg Kroah-Hartman

uml: check length in exitcode_proc_write()

2013-11-13T03:01:49+00:00

commit 201f99f170df14ba52ea4c52847779042b7a623b upstream.

We don't cap the size of buffer from the user so we could write past the
end of the array here.  Only root can write to this file.

Reported-by: Nico Golde 
Reported-by: Fabian Yamaguchi 
Signed-off-by: Dan Carpenter 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAM

2013-11-13T03:01:49+00:00

commit 54e181e073fc1415e41917d725ebdbd7de956455 upstream.

Since the beginning of the parisc-linux port, sometimes 64bit SMP kernels were
not able to bring up other CPUs than the monarch CPU and instead crashed the
kernel.  The reason was unclear, esp. since it involved various machines (e.g.
J5600, J6750 and SuperDome). Testing showed, that those crashes didn't happened
when less than 4GB were installed, or if a 32bit Linux kernel was booted.

In the end, the fix for those SMP problems is trivial:
During the early phase of the initialization of the CPUs, including the monarch
CPU, the PDC_PSW firmware function to enable WIDE (=64bit) mode is called.
It's documented that this firmware function may clobber various registers, and
one one of those possibly clobbered registers is %cr30 which holds the task
thread info pointer.

Now, if %cr30 would always have been clobbered, then this bug would have been
detected much earlier. But lots of testing finally showed, that - at least for
%cr30 - on some machines only the upper 32bits of the 64bit register suddenly
turned zero after the firmware call.

So, after finding the root cause, the explanation for the various crashes
became clear:
- On 32bit SMP Linux kernels all upper 32bit were zero, so we didn't faced this
  problem.
- Monarch CPUs in 64bit mode always booted sucessfully, because the inital task
  thread info pointer was below 4GB.
- Secondary CPUs booted sucessfully on machines with less than 4GB RAM because
  the upper 32bit were zero anyay.
- Secondary CPus failed to boot if we had more than 4GB RAM and the task thread
  info pointer was located above the 4GB boundary.

Finally, the patch to fix this problem is trivial by saving the %cr30 register
before the firmware call and restoring it afterwards.

Signed-off-by: Helge Deller 
Signed-off-by: John David Anglin 
Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

parisc: fix interruption handler to respect pagefault_disable()

2013-10-22T08:02:25+00:00

commit 59b33f148cc08fb33cbe823fca1e34f7f023765e upstream.

Running an "echo t > /proc/sysrq-trigger" crashes the parisc kernel.  The
problem is, that in print_worker_info() we try to read the workqueue info via
the probe_kernel_read() functions which use pagefault_disable() to avoid
crashes like this:
    probe_kernel_read(&pwq, &worker->current_pwq, sizeof(pwq));
    probe_kernel_read(&wq, &pwq->wq, sizeof(wq));
    probe_kernel_read(name, wq->name, sizeof(name) - 1);

The problem here is, that the first probe_kernel_read(&pwq) might return zero
in pwq and as such the following probe_kernel_reads() try to access contents of
the page zero which is read protected and generate a kernel segfault.

With this patch we fix the interruption handler to call parisc_terminate()
directly only if pagefault_disable() was not called (in which case
preempt_count()==0).  Otherwise we hand over to the pagefault handler which
will try to look up the faulting address in the fixup tables.

Signed-off-by: Helge Deller 
Signed-off-by: John David Anglin  
Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

KVM: PPC: Book3S HV: Fix typo in saving DSCR

2013-10-22T08:02:25+00:00

commit cfc860253abd73e1681696c08ea268d33285a2c4 upstream.

This fixes a typo in the code that saves the guest DSCR (Data Stream
Control Register) into the kvm_vcpu_arch struct on guest exit.  The
effect of the typo was that the DSCR value was saved in the wrong place,
so changes to the DSCR by the guest didn't persist across guest exit
and entry, and some host kernel memory got corrupted.

Signed-off-by: Paul Mackerras 
Acked-by: Alexander Graf 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

tile: use a more conservative __my_cpu_offset in CONFIG_PREEMPT

2013-10-13T22:42:50+00:00

commit f862eefec0b68e099a9fa58d3761ffb10bad97e1 upstream.

It turns out the kernel relies on barrier() to force a reload of the
percpu offset value.  Since we can't easily modify the definition of
barrier() to include "tp" as an output register, we instead provide a
definition of __my_cpu_offset as extended assembly that includes a fake
stack read to hazard against barrier(), forcing gcc to know that it
must reread "tp" and recompute anything based on "tp" after a barrier.

This fixes observed hangs in the slub allocator when we are looping
on a percpu cmpxchg_double.

A similar fix for ARMv7 was made in June in change 509eb76ebf97.

Signed-off-by: Chris Metcalf 
Signed-off-by: Greg Kroah-Hartman

mm, show_mem: suppress page counts in non-blockable contexts

2013-10-13T22:42:49+00:00

commit 4b59e6c4730978679b414a8da61514a2518da512 upstream.

On large systems with a lot of memory, walking all RAM to determine page
types may take a half second or even more.

In non-blockable contexts, the page allocator will emit a page allocation
failure warning unless __GFP_NOWARN is specified.  In such contexts, irqs
are typically disabled and such a lengthy delay may even result in NMI
watchdog timeouts.

To fix this, suppress the page walk in such contexts when printing the
page allocation failure warning.

Signed-off-by: David Rientjes 
Cc: Mel Gorman 
Acked-by: Michal Hocko 
Cc: Dave Hansen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Cc: Xishi Qiu 
Signed-off-by: Greg Kroah-Hartman

sparc32: Fix exit flag passed from traced sys_sigreturn

2013-10-13T22:42:49+00:00

[ Upstream commit 7a3b0f89e3fea680f93932691ca41a68eee7ab5e ]

Pass 1 in %o1 to indicate that syscall_trace accounts exit.

Signed-off-by: Kirill Tkhai 
CC: David Miller 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman